







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tile Roofing in Compton, CA: What the Job Actually Involves
Tile roofing in Compton means replacing or repairing a clay or concrete tile roof, and most full roofs here land between $8,000 and $20,000, with repairs running $600 to $2,500. A full tear-off and re-tile usually takes five to ten working days on a single-story Compton home. Call (888) 345-8164 for a free on-site estimate and a written, line-item quote before anything gets ordered.
How Our Tile Roofing Crews Work Through a Compton Roof, Stage by Stage

A tile roof isn’t a shingle job with different material bolted on top. The tile is the visible layer; the real work is the underlayment and flashing beneath it, and that’s where most of the labor lives. Here’s the sequence we run, and where you make decisions along the way.
Stage 1: Tear-off and deck inspection (one to two days)
We strip the old tile and underlayment down to the sheathing, then walk every sheet of decking. On Compton homes built in the 1940s through 1960s, we routinely find soft or delaminated decking near valleys and around penetrations, and those boards get replaced before anything goes back on. You decide at this point whether to replace isolated boards or re-sheet the whole roof; we show you photos either way.
Stage 2: Deck repairs and underlayment (one to two days)
New underlayment goes down over the repaired deck. This is the layer that actually keeps water out, so it’s the part we don’t rush. On a Compton tile roof we typically use a high-temp self-adhered or a heavy synthetic underlayment rated for the heat tile traps against the deck. You choose the underlayment grade here, and it’s one of the few places in the job where spending a little more genuinely buys you years.
Stage 3: Flashing and edge metal (half a day to a day)
Valleys, sidewalls, chimney surrounds, and the perimeter get new flashing. This is where most leaks start, and on the tight lots common in Compton, a neighbor’s wall or a detached garage roof tie-in is often part of the conversation. You’ll approve the flashing approach before we seal anything in.
Stage 4: Tile setting (two to four days)
Tile goes back down, either over a battens-and-flashing system or a direct-adhered method depending on the profile and your budget. Field tile, hip and ridge, and any specialty pieces get set, then the ridge caps are bedded and pointed. You’ll have already picked the tile profile and color back at the estimate, so this stage runs without guesswork.
Stage 5: Final inspection and walkthrough (half a day)
We do a full water test on the flashing points, clean the gutters and yard of broken tile and debris, and walk the roof with you. If a permit was pulled, we schedule the inspection and don’t call the job closed until it passes. Your 730-Day Done Right Promise starts at that final walkthrough, not at the first day of work.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Tile Options You’ll Choose Between
Most of the decisions on a Compton tile roofing project come down to four things: tile material, profile, color, and underlayment grade. Here’s the honest trade-off on each.
- Clay vs. concrete tile. Clay holds color longer and is lighter, but costs more and breaks more easily during install and repair. Concrete tile costs less, comes in more profiles, and holds up well in Southern California heat. For most Compton homes, concrete is the practical choice; clay is the premium one.
- Barrel (Spanish) vs. flat or low-profile tile. Barrel tile gives that classic look but takes more labor and more breakage, so it lands toward the high end of the range. Flat and low-profile tiles install faster and cost less.
- Color and finish. Standard earth tones are the cheapest and easiest to match for future repairs. Custom or premium finishes add cost but rarely add durability.
- Underlayment grade. A standard synthetic underlayment is fine for most jobs; a high-temp self-adhered membrane runs more but is worth it on roofs with steep sun exposure or complex flashing. This is the choice that most affects how long the roof actually lasts.
- Battens vs. direct-adhered. Battens give better ventilation and drainage; direct-adhered is faster and cheaper. Either works, but battens are the better long-term system.
What Tile Roofing Costs in Compton, CA

Tile roofing in Compton runs $8,000 to $20,000 for a full roof, and tile roof repair runs $600 to $2,500. Here’s what moves a job toward the low or high end of that range:
- Roof size and pitch. A simple single-story gable on a small Compton lot sits near the bottom; a complex, multi-plane roof with steep sections sits at the top.
- Deck condition. Soft sheathing or hidden rot found during tear-off adds cost, and on older Compton homes this is common rather than rare.
- Tile material and profile. Concrete flat tile is the budget end; clay barrel tile is the premium end.
- Flashing and penetrations. More valleys, chimneys, skylights, and tie-ins to adjacent structures mean more labor and more material.
- Permit scope. A straightforward re-roof permit is a known cost; a job that exposes structural or code issues during inspection adds time and money.
A written estimate from us lists the tear-off, deck replacement allowances, underlayment, flashing, tile, ridge, and disposal as separate line items, with the permit pulled and inspections passed included. What it doesn’t include unless you ask: gutter replacement, skylight replacement, or structural repairs to rafters, all of which we quote separately if we find them. The number you see on the written estimate is the number you pay, with no change orders on work we scoped.
See the difference
Before
After
Before
After
Before
AfterWhat Compton Homes Specifically Do to a Tile Roofing Job
Compton’s housing stock is mostly 1940s to 1960s single-story stucco tract homes on small R-1 lots with tight side-yard setbacks, and that shapes a tile roof job here in ways it doesn’t in newer inland subdivisions. Those older roofs often have shallow-slope sections, original decking, and flashing tied into detached garages or additions that were added without permits decades ago, so a straightforward re-roof can turn into a careful plan check if we find unpermitted tie-ins. The climate adds its own stress: intense summer sun and seasonal Santa Ana winds bake and lift tile, and we regularly see cracked field tile and dried-out ridge mortar on roofs around the 90220 and 90221 ZIP codes after a windy season. Alquist-Priolo seismic considerations make proper tile attachment more than cosmetic; loose tile is a hazard in a shake, so we fasten to current code rather than matching the original installation. Our teams cover Compton and the surrounding corridor, including Compton proper, and most tile roofing work here is infill remodel or a full re-roof on a home that’s already being updated, so it’s often part of a full Roofing in Compton scope. When homeowners pair a new roof with exterior upgrades, they often add Impact Windows & Doors in Compton at the same time, and some go further with Energy-Efficient Windows in Compton to cut summer heat gain. If you’re not sure whether you need a repair or a full roof, start with our Roofing service and we’ll tell you straight.
Serving Compton, CA – Our Local Coverage Area
We serve Compton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Tile Roofing in Compton

A full tile roof on a single-story Compton home takes five to ten working days, depending on roof size, deck condition, and whether a permit inspection is scheduled. Repairs of a few broken tiles and flashing take a single day. Call (888) 345-8164 and we’ll give you a realistic timeline for your roof at the estimate.
Yes, a full re-roof in Compton requires a permit, and we pull it and schedule the inspection as part of the job. Small repairs that don’t change the roof covering generally don’t need one. If you’re unsure whether your project crosses that line, call (888) 345-8164 and we’ll tell you before you start.
Sometimes, yes. If the sheathing is solid and the rafters are sound, we can lay new underlayment and tile over the existing deck. On older Compton homes we find soft decking often enough that we build a replacement allowance into the estimate rather than guess. Call (888) 345-8164 to schedule a free inspection and find out which category your roof is in.
Tile roof repair in Compton runs $600 to $2,500, depending on how many tiles are broken and how much flashing needs to be rebuilt. A handful of cracked tiles and a re-pointed ridge sit at the low end; a valley rebuild or a large section of wind-lifted tile sits at the high end. Call (888) 345-8164 for an exact quote – estimates are free.
Every tile roofing job we do is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If something isn’t done right, we make it right. Material warranties come separately from the tile manufacturer, and we walk you through both at the final inspection. Call (888) 345-8164 with any warranty question before you sign.
Get a Free Tile Roofing Estimate in Compton
If your Compton roof is due for tile work, we’ll come out, walk the roof with you, and hand you a written, line-item estimate with the permit and inspection included. No pressure and no vague numbers. Call (888) 345-8164 and a live person answers around the clock. We’ll set a time that works for you, bring samples of tile profiles and colors, and answer every question before you commit.
Written by the team at Groundwork Construction Co.












