







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Compton, CA: What It Costs and How Long It Takes
Most aluminum fence installations in Compton run $4,000 to $10,000 for a standard residential lot, and a typical job takes two to four days from layout to final walkthrough. Aluminum is the lighter, rust-proof option compared to steel or iron, and it’s the fence we install most often on the narrow side yards of Compton’s older tract homes. Call (888) 345-8164 for a free on-site estimate before you commit to anything.
The searcher who lands here usually wants a clean perimeter fence that won’t rust through in ten years, won’t need repainting every few summers, and won’t eat up the side-yard clearance they barely have. That’s a real fit for aluminum. Below is how the job actually runs, the specs you’ll pick between, what moves the price, and what Compton specifically does to a fence project.
Key Takeaways
- Aluminum Fence in Compton: $4,000 – $10,000 installed, most jobs done in 2 – 4 days.
- No rust, no repainting, holds up to Santa Ana wind events better than wood.
- Permit is usually required for anything over 6 feet or on a front setback line.
- Works around existing concrete, plumbing stubs and root systems with post-spacing adjustments.
- Every install backed by our 730-Day Done Right Promise.
How We Install an Aluminum Fence in Compton, Stage by Stage

The sequence is the same whether you’re fencing a 40-foot side yard off Alondra or a full perimeter near Compton Creek. What changes is how we handle the ground we find.
Stage 1: On-site measure and layout (day 1, half a day)
We walk the property line with you, confirm exactly where the fence sits relative to the survey or existing markers, and note every obstacle: gas meters, water spigots, A/C pads, hose bibs, existing concrete footings, tree roots, and any slope change. You decide the height (4, 5, or 6 feet), the gate locations, and the post style during this walk. Nothing gets ordered until you sign off on the layout drawing.
Stage 2: Permit filing (day 1 – 2, then waiting)
In Compton, fences over 6 feet, or any fence on a front setback line, typically require a permit. We handle the filing, submit the plot plan, and schedule the inspection. If your fence stays at 6 feet or under and is on the side or rear property line, most of the time no permit is needed. We confirm which applies to your address during the measure.
Stage 3: Demo and prep (day 2, 3 – 6 hours)
Old wood fence panels come down, posts get pulled, and root balls and broken concrete get cleared. If you’re keeping an existing concrete mow strip, we work around it. If the ground hasn’t been dug in decades, we may hit old pier footings or galvanized pipe from a prior fence – both get cut flush and capped. You decide at this stage whether to keep or remove any old gates and hinges.
Stage 4: Post setting and curing (day 2 – 3, 24-hour cure)
Aluminum posts go into holes dug 24 – 30 inches deep, set in concrete, plumbed and braced. That concrete needs a full 24 hours to cure before any panels go up. On the older Compton lots with shallow slab or pier-and-beam foundations, we set posts outside the slab edge so we’re not drilling into structure. This is the stage where lot-line accuracy matters most.
Stage 5: Panel hang, gate install, final walk (day 3 – 4, 4 – 6 hours)
Rails and pickets hang, the gate gets hung and adjusted for swing, latches and self-close hardware go on, and we walk the full run with you panel by panel. Any post out of plumb, any gate that drags, any rail that sits proud of the line – we fix before we leave. You get the written warranty and the final invoice matches the estimate.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Aluminum Fence Options You’ll Choose Between
Aluminum is not one product. The grade and finish you pick is what separates a fence that looks good at year ten from one that looks tired at year three.
- Residential-grade vs. industrial-grade aluminum: Residential (typically 0.055 – 0.062 wall thickness) is fine for a backyard. Industrial-grade is thicker and heavier and costs 20 – 30% more, but it holds rigidity on longer unsupported runs. Most Compton side-yard installs land in residential grade.
- Powder-coated finish: Standard powder coat in black, bronze, or white is what most buyers pick. It doesn’t chip like paint, but a cheap coat will fade in the intense summer sun within 5 – 7 years. We use finishes rated for exterior UV exposure and say so on the spec sheet.
- Picket spacing: 4-inch spacing is a common residential pick for visibility and code compliance around pools. Tighter spacing (2-3/8 inches) reads more private but costs more per linear foot because you’re using more pickets.
- Height: 4 feet for front-yard decorative runs, 5 or 6 feet for side and rear privacy. Anything over 6 feet on a residential lot triggers a permit and often a neighbor notification in Compton.
- Rackable vs. level panels: If your lot has a grade change (common on the sloped side yards near the Compton Creek corridor), rackable panels follow the slope without stair-stepping. Level panels cost less but don’t handle slope as cleanly.
- Gate hardware: Self-closing hinges and keyed latches add $150 – $350 per gate. Worth it if you have kids or a dog, or if you’re fencing a pool.
What Aluminum Fence Costs in Compton, CA

Aluminum Fence installation in Compton runs $4,000 to $10,000 for a typical residential job, with the median landing around $6,500 for a 100 – 150 linear-foot perimeter with one gate. The range is wide because five things drive the number.
| Line Item | Typical Range |
|---|---|
| Aluminum fence, installed (per linear foot) | $35 – $65 |
| Gate with self-close hardware | $250 – $600 |
| Old fence demo and haul-off | $300 – $800 |
| Permit filing (if required) | $150 – $400 |
| Concrete footings (included in per-foot price) | – |
What pushes a Compton job to the low end ($4,000 – $5,500): under 100 linear feet, 4- or 5-foot height, one gate, no old fence to remove, straight property line, easy access for a wheelbarrow and mixer.
What pushes it to the high end ($8,000 – $10,000): 200+ linear feet, 6-foot height requiring a permit, multiple gates, old wood or chain link to demo, tight side-yard access where concrete has to be mixed by hand, or significant grade change requiring rackable panels.
A written estimate from us lists the linear footage, the fence spec (gauge, finish color, picket spacing), gate count and hardware, demo scope, permit status, and the final number. What it doesn’t cover unless you ask: landscape repair after panel removal, root grinding, or hauling away an old concrete mow strip. Ask during the estimate and we’ll price it in.
See the difference
Before
After
Before
After
Before
AfterWhat Compton Homes Specifically Do to This Aluminum Fence Job
Compton’s construction market is dominated by redeveloping the dense post-war tract housing and light-industrial corridors of the 90220 and 90222 core, and that history shapes almost every fence we install here. Most single-family homes in that core date to the 1940s through 1960s, built as single-story stucco tracts on small R-1 lots with tight side-yard setbacks. That matters for aluminum fence in three ways.
First, the property lines are old and often don’t match the original survey – a fence line that reads “correct” to a neighbor can sit 8 inches onto his side of the record line. We measure against the plot map, not the existing fence, before we dig. Second, those narrow side yards make demo and post-setting a hand-carry job rather than a wheelbarrow job, which adds labor. Third, the intense summer sun and seasonal Santa Ana wind events mean any fence here takes more UV and wind-load abuse than the fence-grade rating assumes, so we spec a heavier post on full-exposure runs.
Contractors pulling permits in Compton work through the city’s plan check on tight timelines, and fence permits are no different. If your fence abuts a neighbor’s drive apron or sits on a shared property line in a redeveloping block near Alondra Park, expect a survey request from the city before approval. Better to know that on day one than day ten.
Serving Compton, CA – Our Local Coverage Area
We serve Compton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Aluminum Fence in Compton

Two to four days for most residential jobs, plus the permit review period if one is required. Demo and prep run a day, post-setting takes a day plus a 24-hour concrete cure, and panel hang and final walk take half a day. Call (888) 345-8164 for a firm timeline once we’ve walked your lot.
It depends on height and placement. Fences 6 feet and under on side or rear property lines typically don’t require a permit. Anything taller, or anything on a front setback line, usually does. We confirm the requirement for your specific address during the site visit and handle the filing if one is needed.
Yes, in almost every case. We set posts outside the slab edge and clear of water lines, gas lines, and existing concrete footings, which is standard on the older Compton lots. If a post has to move a few inches off the ideal line to avoid a buried line, we adjust spacing and tell you before we set it.
Expect $4,000 to $10,000 installed, with most jobs around $6,500 for a 100 – 150 foot perimeter and one gate. Height, linear footage, gate count, old fence removal, and grade change all move the number. Call (888) 345-8164 for a free on-site estimate with the exact number written down.
Every install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers workmanship (posts, panel alignment, gate hardware) for the full period. Powder-coat finish warranties come from the manufacturer and vary by the grade you choose.
Get a Free Aluminum Fence Estimate in Compton
Call (888) 345-8164 to schedule a free on-site estimate for your aluminum fence in Compton. We’ll walk the property line with you, measure, confirm whether a permit is required, and hand you a written line-item quote before you commit to anything. Live person answers the phone, 24/7. Our technicians have up to 12 years of experience, and every install is backed by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.












