







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Compton, CA: What It Costs and How Long It Takes
Backsplash, tile & flooring work in Compton usually runs $800 – $2,500 for a kitchen backsplash alone, and $14,000 – $45,000 when tile and flooring are bundled into a full kitchen scope. A backsplash by itself is a 1 – 2 day job. Floor tile across a kitchen and adjoining rooms typically takes 4 – 7 working days once old material is out. Call (888) 345-8164 for a free on-site estimate and a written line-item quote.
Most of the calls we get in Compton start with a specific problem: cracked 1960s floor tile over a settling slab, a backsplash that’s come loose behind the range, or grout so worn it’s trapping grease. The other half are planned upgrades tied to a larger kitchen project. Both are work we do, and both start with the same question – what’s actually under there.
How Groundwork Handles Tile and Flooring Work in Compton

We run this job in five stages. Each one has a decision point where you sign off before we move on, so nothing gets installed over a problem you didn’t know about.
Stage 1 – Site visit and substrate check (same day as your estimate). We pull back a section of existing tile or flooring to see what’s beneath it: slab condition, plywood thickness, old adhesive, any water staining. In Compton’s older tract homes, this is where we most often find the surprise – a shallow slab with hairline cracks, or vinyl over original 1950s tile that’s been layered three times. You get a written scope with material allowances before anyone swings a hammer.
Stage 2 – Demo and prep (1 – 2 days). Old tile, thinset, and underlayment come out. We grind the slab or lay new cement backer board, then check for level within a 1/8-inch tolerance across 10 feet – the number that determines whether large-format tile will sit flat or telegraph every low spot. This is the stage most cheap bids skip, and it’s why their tile pops loose within two years.
Stage 3 – Layout and dry-fit (half a day). You see the tile pattern laid out dry before any thinset goes down. This is the decision point that matters most: grout line width, tile orientation, where cuts land at the edges and corners. Get this wrong and no amount of good installation saves the look.
Stage 4 – Installation (2 – 4 days, depending on square footage). Floor tile goes down first, then backsplash, so floor traffic doesn’t disturb fresh wall tile. Large-format porcelain or natural stone gets a full mortar bed and a leveling clip system. Grout comes 24 hours after the last tile is set.
Stage 5 – Grout, seal, and walkthrough (1 day). Grout cure time runs 24 – 48 hours before light use and 72 hours before heavy traffic. We seal natural stone and porous grout, do a final punch list with you in the room, and hand over the written workmanship warranty.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
These are the real decisions, and the honest trade-offs on each.
- Ceramic vs. porcelain floor tile. Ceramic costs less per square foot and is easier to cut – fine for a low-traffic kitchen. Porcelain is denser, handles moisture better, and holds up to decades of foot traffic. In a Compton kitchen that sees daily cooking, porcelain is usually the right call.
- Large-format vs. standard tile. 12×24 or larger tiles mean fewer grout lines and a cleaner look, but they demand a flatter substrate and cost more to install. Standard 12×12 or mosaic is more forgiving in older rooms with uneven floors.
- Backsplash material. Subway tile is the workhorse – inexpensive, easy to clean, hides grease well. Porcelain slab or large-format panels give a seamless look with minimal grout. Natural stone (travertine, marble) looks beautiful but needs sealing every 1 – 2 years. Glass tile is striking but shows every bit of adhesive behind it, so installation quality shows.
- Grout choice. Standard cement grout is cheap and needs resealing. Epoxy grout costs more upfront but resists staining and never needs sealing – worth it behind a range.
- Fixture pairing. If you’re updating the sink and faucet while the backsplash is out, a Blanco sink or Delta faucet is a common pick – it’s the cheapest moment to do it, since the wall is already open.
What Backsplash, Tile & Flooring Costs in Compton, CA

For Compton, the working numbers are $800 – $2,500 for backsplash installation alone, and $14,000 – $45,000 for a full kitchen scope that includes tile and flooring alongside cabinetry and counters. Here’s what moves a job toward the low or high end.
| Line item | Compton range |
|---|---|
| Backsplash installation | $800 – $2,500 |
| Cabinet installation (if bundled) | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Full kitchen remodel with tile and flooring | $14,000 – $45,000 |
What pushes the number up:
- Substrate repair. Cracked or uneven slab, rotted subfloor, or multiple layers of old flooring all add prep time and material.
- Square footage and tile size. Large-format tile and complex layouts (herringbone, diagonal) take longer and cost more to install per square foot.
- Material grade. Porcelain and natural stone run higher than ceramic; glass and mosaic add labor.
- Moving plumbing or electrical. Relocating a sink or adding outlets behind the backsplash means opening the wall – a bigger scope than tile alone.
- Permit scope. Tile and flooring on their own usually don’t need a permit. But if plumbing or electrical moves, or the work is part of a larger structural change, plan review is required.
Your written estimate lists what’s included – demo, prep, materials with brand and grade named, labor, grout and seal, haul-away – and what isn’t, so there are no change orders halfway through.
See the difference
Before
After
Before
After
Before
AfterWhat Compton Homes Specifically Do to This Job
Compton’s housing stock is mostly 1940s – 1960s single-story stucco tract homes on small lots, many on shallow slabs or pier-and-beam foundations with original galvanized plumbing, and that shapes tile work here in ways it doesn’t in newer suburbs. We regularly find floor tile laid directly over a slab that’s settled unevenly – common in the older tracts around 90220 and 90221 – which means leveling compound or a self-leveling underlayment before any new tile goes down. If the slab has cracks, we assess whether they’re cosmetic or structural before tiling over them.
Behind the backsplash, older Compton kitchens often have early Romex or knob-and-tube-era wiring and galvanized supply lines. When we open the wall for a backsplash, we look at both. If the wiring or plumbing needs updating, that’s a conversation before the tile goes back up, not after. And because the warm, dry Southern California climate means no freeze risk, tile and grout hold up well here – the main enemy is summer sun through south-facing windows and seasonal Santa Ana dust working into unsealed grout. Sealing porous grout and natural stone is not optional in this climate.
If the tile work is part of a bigger project, our Kitchen Remodeling in Compton service covers the full scope, and homeowners often pair this with Vanities, Tile & Fixtures in Compton when they’re updating a bathroom at the same time.
Serving Compton, CA – Our Local Coverage Area
We serve Compton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Backsplash, Tile & Flooring in Compton

A backsplash alone takes 1 – 2 working days. Floor tile across a typical Compton kitchen takes 4 – 7 working days once old material is removed. Add 2 – 3 days if substrate repair or leveling is needed. Call (888) 345-8164 for a timeline specific to your space – the estimate is free.
Tile and flooring on their own generally don’t require a permit. If the work involves relocating plumbing or electrical, or is part of a structural change like a wall removal or addition, a permit and inspection are required – and we pull it and schedule the inspection as part of the job. Call (888) 345-8164 and we’ll tell you exactly what your project needs.
Yes. A backsplash replacement over the existing counter and sink is routine – the wall opens up, we check what’s behind it, and the tile goes back without touching plumbing. If you want to relocate the sink or add an outlet, that changes the scope. Call (888) 345-8164 for a free estimate that separates the two.
Backsplash installation in Compton runs $800 – $2,500. Floor tile is priced by square footage and material, and the total climbs to $14,000 – $45,000 when bundled into a full kitchen scope with cabinets and counters. Call (888) 345-8164 for an exact written quote – estimates are free.
Every tile and flooring project we complete is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, backed in writing before work starts. Call (888) 345-8164 to schedule your free estimate.
Get a Free Backsplash, Tile & Flooring Estimate in Compton
If you’re planning backsplash, tile or flooring work in Compton, the first step is a free on-site estimate. We’ll check the substrate, walk you through material options, and hand you a written line-item quote with no surprises. Call (888) 345-8164 – a live person answers, and we’ll get an estimator to your home. Our team also covers the wider Compton service area, and if the scope grows into a full Kitchen Remodeling project, we handle it from foundation to finish line. Homeowners often pair tile and vanity work with a Tub-to-Shower Conversion in Compton while a crew is already on site.
Written by the team at Groundwork Construction Co. of Long Beach.












