







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterAluminum Fence in Long Beach, CA
An aluminum fence is a powder-coated metal fence system built from rust-resistant aluminum rails and pickets, and in Long Beach it’s the fence most homeowners pick when they want the look of wrought iron without the maintenance headaches. It holds up to salt air, stays straight in coastal wind, and never needs repainting or staining. If you’ve been putting off a fence because wood keeps rotting and steel keeps rusting, aluminum is usually the answer.
Groundwork Construction Co. of Long Beach installs aluminum fencing for homeowners across the city, from the breezy blocks of Belmont Shore to inland yards in Bixby Knolls and Lakewood-adjacent neighborhoods. Our technicians have up to 12 years of experience setting posts, racking panels over slopes, and getting gates to swing true. Every job is backed by our 730-Day Done Right Promise, and you can reach a live person 24/7 at (888) 345-8164 to talk through your project. This page covers the aluminum piece specifically; for the full range of materials and styles we handle, see our Fence Installation service.
Key Takeaways
- Aluminum fencing in Long Beach typically runs $38 to $72 per linear foot installed, depending on height, style, and gate count.
- Powder-coated aluminum resists the salt air and marine layer that eat through wood and bare steel along the coast.
- Most residential aluminum fence jobs are completed in one to three days.
- Groundwork backs every installation with the 730-Day Done Right Promise and upfront pricing that doesn’t change after the bid.
- Call (888) 345-8164 for a free estimate and design consult.

When You Need Aluminum Fence
Homeowners call us about aluminum fencing for a handful of reasons that come up again and again in Long Beach. Here’s what usually triggers the call:
- Your wood fence is failing along the coast. In Belmont Shore, Naples, and the Peninsula, the salt air and morning marine layer break down wood faster than almost anywhere in the region. We regularly see cedar and redwood pickets in these neighborhoods go soft at the bottom within a few years. Aluminum sidesteps that entirely.
- You want a pool barrier that passes inspection. California pool code requires specific height and self-closing, self-latching gate hardware, and aluminum is the cleanest material for meeting it. If you’re adding a pool or spa in Long Beach, you’ll likely need a compliant fence around it.
- You need to keep pets or kids contained without blocking the view. A 4-foot or 5-foot aluminum picket fence gives you a secure boundary while letting you see through to the street or the water. A lot of Signal Hill and Rose Park homeowners pick this over solid wood for exactly that reason.
- You’re tired of painting and staining. Aluminum arrives powder-coated in your chosen color and holds it. No scraping, no resealing, no annual weekend project.
- You want the wrought-iron look without the cost or rust. Decorative aluminum styles mimic traditional iron fencing at a lower price, and they don’t rust when the fog rolls in off the Pacific.
- You have a slope or uneven grade. Long Beach lots aren’t all flat, and aluminum panels can be racked to follow a grade rather than stepped, which keeps the top line clean on hillside yards.
Our Aluminum Fence Process
Every aluminum fence project follows the same disciplined sequence, whether it’s a short run along a driveway in Cal Heights or a full perimeter around a corner lot near El Dorado Park. Here’s how it works:
- Free estimate and site walk. We come out, measure the actual run, check the grade and soil, and talk through style, height, and gate placement. You get a written, upfront price before any work begins. No surprise line items later.
- Property line and permit check. We confirm where your property line sits and whether the project touches the public right-of-way, which in parts of Long Beach triggers a city review. We handle the paperwork so you don’t get stuck with a stop-work order.
- Layout and post setting. Posts get set in concrete to a depth that accounts for Long Beach’s sandy coastal soil, spaced to the panel manufacturer’s spec. We sight down the run as we go so the fence line stays true.
- Panel and gate installation. Rails and pickets go up, racked to follow any slope, and gates are hung to swing and latch correctly. Self-closing and self-latching hardware goes in where pool code or your preference calls for it.
- Final walkthrough. We walk the whole fence with you, check every gate, confirm the color and finish, and leave the site clean. If anything’s off, the 730-Day Done Right Promise means we come back and make it right.
We can also pair fencing with gates, retaining walls, and paver work so a single contractor handles the whole job from foundation to finish line. If you’re planning that broader scope, our home page lays out the full set of services.

Aluminum Fence Pricing in Long Beach
Aluminum fence installation in Long Beach generally runs $38 to $72 per linear foot installed, including posts, panels, and standard hardware. A typical 100-foot residential run lands somewhere around $4,000 to $6,500 before gates. The number you see on your estimate is the number you pay, and we back the work with 0% financing for 18 months plus $1,000 off projects over $10,000.
Here’s how the pricing breaks down by component:
| Item | Typical Range |
|---|---|
| Standard 4-ft aluminum picket fence, installed | $38 – $50 per linear foot |
| 5-ft or 6-ft aluminum picket fence, installed | $48 – $62 per linear foot |
| Decorative/spear-top ornamental aluminum | $58 – $72 per linear foot |
| Walk gate (3-ft to 4-ft), installed | $350 – $650 each |
| Driveway gate (double, 10-ft to 14-ft opening) | $1,200 – $2,800 |
| Self-closing/self-latching pool-code hardware add-on | $150 – $350 per gate |
What moves the price most: overall length of the run, fence height, how decorative the style is, gate count and gate type, and site conditions. A long run over flat ground with concrete set at standard depth is the low end. A sloped yard, tight access, old fence removal, or a run that crosses utilities pushes it higher. Old fence tear-out and haul-away typically adds $3 to $8 per linear foot when we handle disposal.
Prompt and clear pricing is our default because vague bids are exactly what burns homeowners. We’ll put the full scope in writing, and if we discover something during installation that genuinely changes the job, we talk to you before we do anything about it. Call (888) 345-8164 for a free estimate and design consult.
Why Aluminum Instead of Wood, Vinyl, or Wrought Iron?
We install all four, so we’ll give you the straight comparison. Wood is the most affordable up front but it’s the highest-maintenance option, and coastal Long Beach air shortens its life. Vinyl holds color and needs little upkeep but can crack in strong Santa Ana wind and doesn’t flex like aluminum. Wrought iron is the most durable look but it rusts without regular recoating, especially near the water. Powder-coated aluminum gives you the ornamental look, the durability, and the low maintenance, usually at a fraction of iron’s cost. For most residential boundaries in Long Beach, it’s the best balance of looks and longevity.
Brands and Finish Options We Work With
The right aluminum starts with the right alloy and coating. We work with established manufacturer brands (Atlas among them) whose powder coatings are formulated to resist fading, chalking, and corrosion. You’ll pick from black, bronze, and other standard colors, and decorative styles range from simple flat-top to spear-top and arched. We’ll show you samples so you’re choosing a finish you’ll still like in ten years, not one that looked good on a screen.
Keep an Aluminum Fence Looking New in Coastal Long Beach
One of the reasons homeowners pick aluminum is that upkeep is almost nothing. Rinse the pickets with a garden hose a couple of times a year to knock off salt and dust, and wipe off any bird droppings or tree sap before they sit too long. Check gate hinges and latches once a season and tighten hardware if anything loosens. That’s it. No painting, no staining, no wood rot. Built to last, backed in writing.
What About HOA and City Rules in Long Beach?
Fence height, placement, and style can be governed by your HOA, and certain front-yard or corner-lot fences near the public right-of-way may need city review. We check the rules that apply to your specific property before we set a single post, so you’re not installing a fence you later have to take down. If your project is part of a larger addition or ADU build, our Home Additions & ADU team coordinates directly with the fence crew so everything lines up.
Nearby Communities We Serve
Aluminum fencing and gates are a regular part of our work around Long Beach. If you’re in a neighboring city, our teams cover Signal Hill fence installation, Cerritos, and Lakewood as well. Local homeowners in each area get the same site walk, the same written pricing, and the same 730-Day Done Right Promise on every job.
You can also read more on our related pages: roofing in Long Beach for the wind-and-salt exposure that wears on coastal homes, driveway pavers if you’re planning gates and paving together, windows and doors, and our guidance on kitchen remodeling in Long Beach. For material and design ideas, see our pages on bathroom remodeling and fence installation in Bixby Knolls, where aluminum picket fencing is especially common.
FAQs – Aluminum Fence
How much does an aluminum fence cost in Long Beach?
An aluminum fence in Long Beach typically costs $38 to $72 per linear foot installed, with gates priced separately. A standard 100-foot run usually lands between $4,000 and $6,500 before gates. The exact number depends on height, style, gate count, and site conditions, and we put it all in writing. Call (888) 345-8164 for a free estimate – the consult costs nothing and you’ll have a real number in hand.
Can you install an aluminum fence the same day?
Most aluminum fence installations are completed in one to three days, though a same-day install depends on the size of the run and site access. Small runs on flat ground with good access move fastest. Call (888) 345-8164 and we’ll tell you honestly how long your specific project will take.
Is aluminum fencing good for coastal Long Beach weather?
Yes – powder-coated aluminum is one of the best materials for coastal Long Beach because it resists salt-air corrosion that rusts bare steel and breaks down wood. It won’t rot like wood or rust like wrought iron, and it holds its finish through the marine layer and coastal wind. Ask us to walk you through coating warranties when we come out. Call (888) 345-8164 to set up a free estimate.
Will an aluminum fence meet pool safety code in Long Beach?
Aluminum fencing can meet California pool safety requirements when it’s the correct height with self-closing, self-latching gate hardware. We install compliant pool barriers as a standard part of our fence work, and we check the specifics that apply to your yard before installation. Call (888) 345-8164 to schedule your free estimate and design consult.
Get Your Aluminum Fence Estimate
If your wood fence is failing, you’re adding a pool, or you just want a boundary that looks sharp and never needs repainting, aluminum is worth a serious look in Long Beach. Groundwork Construction Co. of Long Beach brings experienced technicians, upfront pricing that doesn’t change after the bid, background-checked crews in uniform, and the 730-Day Done Right Promise on every installation. Calls are answered by a live person 24/7, so no voicemail and no waiting until Monday. Call (888) 345-8164 for a free project estimate and design consult – we’ll walk the yard, measure the actual run, and get you a real number.
Written by the team at Groundwork Construction Co. of Long Beach, serving Long Beach.


