







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterChain Link Fence Cost Per Foot in Long Beach, CA: What You’ll Actually Pay
Chain link fence in Long Beach runs $12-$20 per linear foot installed for standard galvanized, $18-$28 per foot for vinyl-coated, and $24-$34 per foot for heavy commercial-gauge vinyl-coated. A typical Long Beach residential job falls in the $3,500-$9,000 range once gates, posts, and tear-out are counted. Call (888) 345-8164 for a free, upfront per-foot estimate. The number you see is the number you pay.

Why the Cheapest Quote Per Foot Can Cost You More in Long Beach
Galvanized chain-link costs less per foot than vinyl-coated. That holds right up until you’re replacing it in year 8 instead of year 15, because the port salt air chewed through the uncoated wire and you spent three years staring at orange rust streaks bleeding onto a gray fence.
Long Beach sits beside one of the largest cargo ports in the hemisphere. The prevailing onshore breeze off San Pedro Bay carries salt particulate that settles on every exposed metal surface in the city, and fences take the worst of it. Galvanized chain-link fabric within a few miles of the water typically shows red rust in 5-8 years. Properly applied vinyl coating over galvanized core stretches that to 15-20 years. That gap is a service-life difference, not a cosmetic preference, and it changes the cost-per-year math entirely.
Run it honestly: 150 feet of galvanized at $16 a foot is $2,400, replaced at year 8, so roughly $300 a year. The same run in vinyl-coated at $22 a foot is $3,300 and lasts past year 15, or about $220 a year. The cheaper fence costs more every year you own it. That’s the whole argument.
Full Long Beach Chain Link Fence Price Table
Per-foot ranges below are installed prices for a typical residential run in Long Beach, including posts, rails, tension wire, fabric, and standard gates. Mobilization, tear-out of an old fence, and concrete work are itemized separately.
| Line item | Cost range |
|---|---|
| Standard galvanized chain link, installed | $12-$20 per linear foot |
| Vinyl-coated chain link, installed | $18-$28 per linear foot |
| Heavy commercial-gauge vinyl-coated, installed | $24-$34 per linear foot |
| Hot-dipped galvanized or powder-coated posts (upgrade) | add $2-$4 per linear foot |
| Walk gate, 3-4 ft wide | $250-$550 each |
| Drive gate, 10-12 ft wide | $700-$1,600 each |
| Tear-out and haul-away of existing fence | $3-$6 per linear foot |
| Typical Long Beach residential project, all-in | $3,500-$9,000 |
Run lengths, slope, gate count, and how much old concrete you need to break will move the final number. Estimates are free and walked on site, not guessed over the phone.

Specify the Posts, Not Just the Fabric
Here’s where most installs fail along the coast. Homeowners pick vinyl-coated fabric for the whole run, then the crew sets bare galvanized terminal posts and tension wire. Six or seven years in, the fabric still looks fine and the corner post is the thing turning orange.
Terminal posts, corner posts, and tension wire carry the structural load, so they hold moisture longer and sit closer to the ground. Specifying hot-dipped galvanized or powder-coated posts adds $2-$4 per linear foot to your run. On a 150-foot fence that’s $300 to $600. It eliminates the most common failure point we see in coastal Long Beach installs, and it’s the line item other bids quietly leave off.
Groundwork works with a verified set of material partners so posts and fabric match spec for spec rather than whatever the supply house has stacked that week. Built to last, backed in writing.
Common Long Beach Scenarios We Get Called For
Chain link is the dominant fencing choice for the 1950s-1970s fourplex and garden apartment lots through central and north Long Beach. Those are rental-property budgets, and the owners calling us are making a holding-cost decision, not a curb-appeal decision. Sticker price matters less than cost per year of service.
- Fourplex property line, roughly 180 linear feet: shared boundary with the neighbor, half the run against a stucco wall. Commercial-gauge vinyl-coated with powder-coated terminal posts holds up to tenant turnover and Saturday trash-can traffic.
- Garden apartment courtyard, 100-140 feet: galvanized with a vinyl privacy slat weave. Lower per-foot spend, and the slats hide the fabric from direct view.
- Single-family side yard in Rose Park or Belmont Heights: a short run with a walk gate, where the fence has to clear a mature tree root and a mature neighborhood sense of what looks right. Small jobs still get a real estimate.
- East-side property after a Santa Ana wind event: downed panel, bent top rail, or a post pulled out of dry soil. Repair work, priced per foot and quoted upfront.
One local wrinkle worth knowing: on the older bungalows and fourplexes around Rose Park and Belmont Heights, a fence install often turns into a conversation about property lines, historic-district design review, and Coastal Zone review when the run faces the street. Most backyard chain link never touches a permitting stack. Front-yard replacement on a corner lot sometimes does. We’ll tell you before you spend the money, not after.
Why Landlords Call Us on a Sunday
A tenant reports a downed fence panel after a dry Santa Ana wind event. It’s Sunday afternoon. You need a real answer, not a voicemail box that sits until Monday morning. Calls to Groundwork are answered by a live person, 24 hours a day, seven days a week, and quoted with transparent per-foot pricing rather than a vague “we’ll come look at it.”
Our technicians have up to 12 years of experience, and every crew member is background-checked and arrives in uniform. Every fence we install is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. That applies to workmanship, not just materials, and it’s one of the longest workmanship guarantees in residential construction.
For owners comparing bids, that guarantee changes the risk picture on a fence nobody looks at until something breaks. If you’re weighing materials and want the full specification picture beyond chain link, our Fence Installation page covers vinyl, aluminum, and wood side by side.
Galvanized or Vinyl-Coated: How to Choose in Long Beach
Distance from the water is the deciding factor, followed by who’s on the other side of the fence.
- Within about a mile of the port or shoreline: vinyl-coated, full stop. Galvanized will rust through before the fence pays for itself.
- Central and north Long Beach, a few miles inland: vinyl-coated is still the better cost-per-year call, especially on rentals where replacement interruption matters.
- East side, inland edge, or a short-term hold: standard galvanized is defensible if you plan to sell within several years.
- Commercial-gauge vinyl-coated anywhere: the right spec for fourplex boundaries, drive edges, and any run where a vehicle, gate, or tenant will lean on it.
Foundation-to-finish coordination matters when a fence is part of a larger exterior project, like a driveway or patio rebuild. Prefab and modular partners such as Tuff Shed and Boxabl come up on the same lots when owners are adding structures behind the fence line, and lining up fence layout with a slab or pavers up front saves redoing the run later. More on how we sequence exterior work lives on our home page.
FAQs
Chain link fence in Long Beach costs $12-$20 per linear foot installed for standard galvanized, $18-$28 for vinyl-coated, and $24-$34 for heavy commercial-gauge vinyl-coated. A typical residential job lands between $3,500 and $9,000 all-in. Call (888) 345-8164 for an exact per-foot quote on your run. Estimates are free.
Yes. Galvanized chain link near the water in Long Beach typically shows rust in 5-8 years, while properly applied vinyl coating over galvanized core lasts 15-20 years. The salt-laden onshore breeze off San Pedro Bay is the reason. Adding hot-dipped galvanized or powder-coated posts for $2-$4 per foot closes the other common corrosion gap.
Yes. Groundwork answers calls with a live person 24/7, so a Sunday report of a downed panel after a Santa Ana wind event gets a real response, not a voicemail. Repairs are quoted upfront per foot before any work starts, and our technicians have up to 12 years of experience. Call (888) 345-8164.
Repair usually wins if the fabric is still vinyl-coated and the posts aren’t rusted through. On a coastal Long Beach fence that’s failed at a corner post or tension wire, spot repair buys time but won’t stop the corrosion already underway in the metal. A walk-through tells you which side you’re on, and the estimate is free. Call (888) 345-8164 to schedule.
Ready for a real per-foot number? Groundwork Construction Co. of Long Beach walks the property, measures the run, and prices it upfront, with 0% financing for 18 months and $1,000 off projects over $10,000. Call (888) 345-8164 for a free estimate and lock in the right spec for your fence line before the next wind event. Built to last, backed in writing.
Written by the team at Groundwork Construction Co. of Long Beach, serving Long Beach, CA.
What Our Customers Say
"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."
- Marco Castillo"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."
- Robert Sullivan"The finished work is exactly what we wanted. It did run about three weeks over, mostly waiting on a cabinet delivery that was out of his hands, though I would have liked more updates during that stretch."
- Dev Sharma












