







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Full Kitchen Remodeling in Torrance, CA: Scope, Timeline, and What It Costs
A full kitchen remodeling in Torrance usually means a down-to-studs rebuild of the room: new cabinets, counters, flooring, lighting, plumbing fixtures, and often relocated plumbing or electrical. Expect 6 to 10 weeks of construction after design and permitting, and a realistic budget of $14,000 to $45,000 depending on size and material grade. Call (888) 345-8164 to schedule a free on-site estimate and walk through your scope before you commit to anything.
How a Full Kitchen Rebuild Moves From Demo to Final Walkthrough

Every full kitchen follows the same skeleton, and knowing the sequence is half the reason a project stays on schedule. Here’s what actually happens, week by week.
Stage 1: Site protection and demo (days 1 – 3)
We seal off the kitchen from the rest of the house with plastic and zip walls, lay floor protection on the paths we’ll use, and pull the appliances. Then demo: cabinets out, counters off, flooring up, and drywall opened where plumbing or electrical is moving. On a Torrance tract home, this is the day we find out what the walls are hiding. Original 1950s aluminum wiring or galvanized supply lines often surface here, and we don’t hide them behind new cabinets. You’ll get a written change order before we touch it.
Stage 2: Rough-in trades and inspection (days 3 – 7)
Plumbing, electrical, and any HVAC or gas relocation happen now, in that order, before insulation and drywall go back up. If your layout moves the sink, range, or dishwasher, this is when the rough plumbing is set. We pull the permits and hold the rough-in inspection before walls close. That inspection is the checkpoint that protects you, and skipping it is how homeowners inherit problems at resale. What you decide here: fixture rough-in locations and outlet and lighting placement, finalized before the drywall goes on.
Stage 3: Drywall, prep, and paint (days 7 – 18)
Drywall patches, texture to match, and primer and paint on the walls and ceiling. Cabinet delivery usually lands in this window so the next stage doesn’t sit waiting on a truck. This is your decision point on cabinet finish, countertop slab selection, and backsplash tile. Lead times are real: a semi-custom cabinet order runs 3 – 6 weeks, and a natural stone slab has to be templated after cabinets are set, not before.
Stage 4: Cabinets, counters, backsplash (days 18 – 35)
Cabinets set and leveled, then template for the countertop, then fabrication and install, then backsplash. That template-setting is why your counter can’t be ordered the same day the cabinets arrive. Expect 7 – 10 days between template and install for quartz or stone. Sink and faucet go in after the counter is set. Flooring typically follows, then trim and finish carpentry.
Stage 5: Fixtures, punch list, and handoff (days 35 – 50)
Appliances, final plumbing trim, outlet covers, paint touch-ups, and the punch list. We walk the room with you and don’t call it done until you agree it’s done. Most full kitchen jobs land in that 6 to 10 week window, with the shorter end on smaller rooms and cabinet lines that ship fast. The work is covered by our 730-Day Done Right Promise, so if anything isn’t right months later, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make, and the Trade-offs Behind Them
Most of the budget lands in a handful of decisions. Here’s how we walk homeowners through each one.
- Cabinet grade: Stock cabinets are fastest and cheapest but limit sizes and finishes. Semi-custom (what most Torrance homeowners land on) lets you fit the room precisely. Full custom buys you any dimension at a real jump in cost. We work with KraftMaid lines because the semi-custom flexibility is where most of our jobs land.
- Countertop material: Laminate is the budget pick at roughly $2,000 – $3,000 for a typical kitchen but shows wear at seams. Quartz (Cambria and similar) resists stains and needs no sealing, and it’s what most of our buyers choose. Natural stone costs more and needs periodic sealing but gives you a look no engineered surface matches.
- Layout change versus keep: Keeping the sink, range, and fridge in place is the single biggest cost saver. Moving the sink alone can add plumbing and permit scope. Moving a wall may mean structural work.
- Flooring: Luxury vinyl plank handles moisture and kids and installs over most existing slabs. Porcelain tile is harder-wearing and colder underfoot. Engineered hardwood looks best and needs more care near the sink.
- Ventilation and lighting: A ducted range hood to the exterior beats a recirculating one in any real cooking kitchen. Recessed LED cans plus under-cabinet task lighting is the standard now, and worth planning in stage 2, not after drywall.
What Full Kitchen Remodeling Costs in Torrance, CA

The lead range for a full kitchen here is $14,000 to $45,000. Where you land inside that range comes down to five variables:
- Room size: A 100-square-foot galley sits at the low end. A 250-square-foot open kitchen pushes up.
- Existing condition: Uncovering aluminum wiring or failing galvanized pipe in an older tract home adds scope you can’t see until demo.
- Moving plumbing, electrical, or structure: Relocating the sink, range, or an interior wall carries the biggest single swing.
- Material grade: Cabinet line, countertop material, and appliance tier can move the total by $10,000 or more.
- Permit scope: A cosmetic swap may not need one. Moving plumbing or electrical does, and the permit and inspection cost is real.
For reference on line items inside a full kitchen: cabinet installation runs $4,000 – $13,000, countertop installation $2,000 – $6,500, backsplash $800 – $2,500, and a kitchen island install $3,000 – $10,000. Your written estimate itemizes every line so there are no surprises when the bill arrives. What’s typically not in the base number: unforeseen structural or wiring repairs found at demo, and appliance costs if you’re sourcing your own. Call (888) 345-8164 for an exact quote. Estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Torrance Homes Specifically Do to This Job
Torrance is a master-planned post-war company town, and its housing stock tells you exactly what to expect when walls open. Most homes we work on here are 1950s – 1970s single-family tract homes with plaster walls, slab-on-grade foundations, and original galvanized or early copper plumbing. Open a wall in a tract off 182nd Street or near the 90503/90504 boundary and you may find original aluminum branch wiring that has to be brought up to current code once it’s exposed. That’s not a scare tactic, it’s a pattern we plan for, and it’s why we budget a contingency into every full kitchen estimate.
The climate is on your side. Torrance’s marine-influenced South Bay weather means construction rarely gets weather-delayed, so a kitchen remodel can run straight through the calendar. The city’s strict residential design standards also shape the work: exterior changes, additions, and structural moves require permits and inspection, and we pull them and hold the inspections rather than leaving it to you. If you’re in 90501, 90503, 90505, or 90510 and planning a wider down-to-the-studs overhaul, that’s part of a full Kitchen Remodeling in Torrance and we’ll scope it together. If you’re expanding the bathroom at the same time, homeowners often pair this with Full Bathroom Remodeling in Torrance or a Walk-In Showers & Shower Remodeling in Torrance package.
Serving Torrance, CA – Our Local Coverage Area
We serve Torrance and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Full Kitchen Remodeling in Torrance

Plan on 6 to 10 weeks of active construction once permits are in hand, plus 3 to 6 weeks of design and cabinet lead time before that. Smaller rooms and quicker cabinet lines land at the short end. Call (888) 345-8164 for a timeline built around your specific room.
Yes, if you’re moving plumbing, electrical, gas, or a wall. A full rebuild almost always triggers permits and inspections. We pull the permits and hold the rough-in and final inspections on your behalf, so nothing gets missed. Call us to review your scope and we’ll tell you what your specific job needs.
Yes, and it’s the most cost-effective path. Keeping the sink, range, and fridge in place avoids plumbing and structural scope and keeps the job closer to the $14,000 end. Move the sink and you add plumbing and permit scope, which can add several thousand dollars.
Most jobs land between $14,000 and $45,000. Lower range means a compact room, kept layout, and stock or semi-custom cabinets. Upper range means a large open kitchen, kitchen island, quartz or stone counters, and moved utilities. Call (888) 345-8164 for an exact written quote with line items. Estimates are free.
Our 730-Day Done Right Promise covers workmanship for 730 days. If something isn’t right, we come back and make it right. Material warranties pass through from the manufacturer, so your cabinet and countertop warranty stays with you in writing.
Get a Free On-Site Full Kitchen Remodeling Estimate in Torrance
Call (888) 345-8164 to schedule your free on-site estimate. A live person answers, day or night. We’ll walk the room, measure, talk through layout options, and hand you a written line-item quote with a fixed price and no change-order surprises, backed by our 730-Day Done Right Promise. If you’d like to see how a full build fits into our broader Kitchen Remodeling work, we’re glad to cover it. You can also see the full scope of what we do around Torrance before you book.
Written by the team at Groundwork Construction Co.












