







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Full Kitchen Remodeling in Lomita, CA: What It Involves, How Long It Takes, What It Costs
Full kitchen remodeling in Lomita, CA typically runs $14,000 – $45,000 and takes 4 to 8 weeks of build time once drawings, permits and materials are locked in. The job means gutting the room down to studs and subfloor, correcting whatever the old framing, wiring and plumbing have been hiding, then rebuilding with new cabinets, counters, flooring, lighting and fixtures. Most Lomita kitchens we open up are in 1920s – 1950s wood-frame homes, so surprises are the norm. Call (888) 345-8164 for a free on-site estimate and we’ll walk the room with you before any number is quoted.
How we take a Lomita kitchen from demo to final walkthrough

Every full kitchen remodeling job moves in a fixed sequence. The order isn’t negotiable, because each stage depends on the one before it. Here’s what actually happens and when you have to make decisions.
Stage 1: Design, selections and permit drawings (2 – 4 weeks before demo)
We measure the room, check sight lines and layout constraints, and settle the cabinet run, island footprint and appliance locations. You choose cabinet door style and finish, countertop material, sink, faucet and lighting at this stage, because the plan check drawings have to reflect them. Lomita’s own building department reviews and issues the permit here, so nothing gets demolished until paperwork is in hand. This is when you decide: layout, materials and finish schedule.
Stage 2: Protection and demo day (days 1 – 3)
We mask the adjacent rooms, seal off dust with plastic barriers and lay floor protection on the path from the front door. Demo removes old cabinets, counters, appliances, flooring and, in older Lomita homes, the original plaster and lath behind them. We open walls to inspect framing and identify what’s actually there: knob-and-tube wiring, galvanized supply lines or undersized circuits.
Stage 3: Rough-in and inspection (days 3 – 10)
Plumbing, electrical and any structural changes get roughed in, then the city inspects before anything closes back up. If the layout moves the sink or range, that means new drain runs, dedicated appliance circuits and often a subpanel upgrade. This stage is where the real scope creep lives, and we write change orders in advance so you never get surprised at the end. You approve rough-in changes before we close walls.
Stage 4: Drywall, cabinets and surfaces (weeks 2 – 5)
Insulation, drywall, tape, texture and paint go up. Cabinets get set and leveled, then the countertop template is taken, which means a 7 – 10 day wait for fabrication before the counters come back and get installed. Tile backsplash, flooring and trim follow. KraftMaid and Cambria carry a lot of our kitchen work because the fit and finish hold up, and Blanco and Delta sinks and faucets are the most common choice for function.
Stage 5: Fixtures, punch list and walkthrough (final week)
Appliance install, final plumbing and electrical trim, hardware and caulk. Then we do a punch walk with you, note anything that isn’t right, and fix it before we hand over keys. Final inspection follows, and you get the 730-Day Done Right Promise in writing – if something we installed fails or isn’t right, we make it right. This last week is when you sign off and we hand over the warranty packet.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually weigh for a full kitchen in Lomita
A full kitchen remodeling job is a stack of choices, and each one moves the budget. These are the real trade-offs we walk through on site.
- Cabinet construction: Plywood boxes with dovetail drawers hold up for decades and take heavy loads in a humid coastal climate. Particleboard boxes are cheaper and fine in a dry interior, but they don’t handle moisture or a leak the same way. Semi-custom runs about 30-40% more than stock but solves odd wall widths common in older Lomita bungalows.
- Countertop material: Quartz is dense, non-porous and the easiest to keep clean, but it’s heavy and needs solid cabinet support. Granite holds heat well and hides scratches but requires periodic sealing against moisture. Laminate is the budget option and doesn’t handle wet heat near the sink the same way quartz does.
- Sink and faucet: Undermount sinks are easier to wipe down but require a solid countertop edge. A drop-in sink works with laminate and costs less to change later. Pull-down faucets with a spray mode are the practical standard for a working kitchen.
- Flooring: Porcelain tile resists water, salt air and spills; it’s cold underfoot and harder on dropped dishes. Luxury vinyl plank is warmer, quieter and cheaper to install, but soft edges can lift near a dishwasher leak. Engineered wood is the middle choice.
- Lighting: Under-cabinet LED strips and a layered recessed plan beat one ceiling fixture every time in a small kitchen. That means a slightly larger electrical scope but much better work surface visibility.
What full kitchen remodeling costs in Lomita, CA

Our Lomita kitchen remodel range is $14,000 – $45,000. That range is wide because the low end is a same-layout refresh in good existing condition and the high end is a full gut with new plumbing runs, electrical service upgrade and premium surfaces.
| Line item | Typical cost |
|---|---|
| Full kitchen remodel (whole job) | $14,000 – $45,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What pushes a job toward the high end: square footage (a 100 sq ft galley and a 250 sq ft open kitchen are different projects), existing condition (galvanized plumbing and two-wire circuits add real money), relocating plumbing or structure (moving a range or waste line means new drains and often a subpanel), material grade (semi-custom cabinets and stone slabs push the number up), and permit scope (structural changes, gas line relocations and second-story work require more drawings and inspection cycles).
A written estimate from us lists everything line by line, materials and labor, so the number you see is the number you pay. What’s typically not included in any contractor’s kitchen bid: unforeseen rot or framing damage behind the walls, appliance delivery beyond the threshold, and structural repairs discovered mid-demo. We quote those changes before we make them, and 0% financing for 18 months plus $1,000 off projects over $10,000 can take the sting out of the big-ticket version.
See the difference
Before
After
Before
After
Before
AfterWhat Lomita’s housing stock and permits do to a full kitchen job
Lomita is a fully built-out Harbor Gateway city of roughly one square mile, incorporated in 1964 and surrounded by Torrance on most sides. There’s almost no undeveloped land, so our work here is entirely remodel and rebuild on tight infill lots, not new build. That matters for a kitchen because the house you’re working in was almost certainly built between the 1920s and 1950s as a small single-family bungalow or early tract home on a 5,000 – 6,000 sq ft lot. The walls hold knob-and-tube wiring and galvanized supply lines, and the kitchen is usually the smallest room in the house with the fewest outlets.
Permits go through the City of Lomita’s own building department, which layers small-city plan check on top of LA County coastal-area rules. That means review times, setback interpretation and inspection scheduling are handled lot by lot here in a way they aren’t in sprawling Torrance. On a kitchen we pull the permit before demo, and the city inspects rough-in before drywall. The coastal marine layer and salt air matter too: we spec corrosion-resistant hardware and pay close attention to window and door flashing and under-sink waterproofing, because damp fog and salt drive premature wood rot and fastener corrosion more than inland heat does. If the scope is bigger than one room, it’s usually part of a full Kitchen Remodeling in Lomita plan, and homeowners often pair it with Full Bathroom Remodeling in Lomita or Walk-In Showers & Shower Remodeling in Lomita while crews are already on site.
Serving Lomita, CA – Our Local Coverage Area
We serve Lomita and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Full Kitchen Remodeling in Lomita

Build time runs 4 to 8 weeks once permits and materials are ready, and the full calendar from first walkthrough to final inspection is usually 2 to 3 months. The long pole is rarely the crew – it’s the countertop template wait, cabinet lead times and city inspection scheduling. Call (888) 345-8164 for a timeline tied to your specific layout and selections.
Yes, in almost every case. Lomita’s building department requires a permit for any project that touches electrical, plumbing, gas or structural framing, and a gut kitchen touches all four. We pull the permit and manage the inspections – you don’t touch the paperwork. Call (888) 345-8164 to talk through what your scope triggers.
Yes, and keeping the sink, range and wall layout where they are is the single biggest cost saver – it keeps the job closer to $14,000 instead of $45,000. Moving a sink or range means new drain runs, often a subpanel, and more inspection cycles. We’ll tell you honestly whether the layout you want is worth the cost. Call (888) 345-8164 and we’ll price both versions.
It runs $14,000 – $45,000 depending on size, existing condition, material grade and permit scope. Small kitchens can come in around $9,000 – $20,000; full gut jobs with new plumbing and premium surfaces land near the top. Call (888) 345-8164 for an exact quote – estimates are free and written line by line.
Every Groundwork Construction Co. kitchen is covered by the 730-Day Done Right Promise – if our workmanship fails or something isn’t right, we make it right for two full years. Product warranties from the cabinet, countertop and appliance makers stack on top of that. Call (888) 345-8164 for details.
Get a free on-site estimate for your Lomita kitchen
Call (888) 345-8164 and we’ll set a time to walk your kitchen, check the existing wiring and plumbing, and talk through layout and materials. You’ll get a written, line-item estimate with the full scope and no surprise change orders – and a live person answers the phone any hour, any day. Our technicians have up to 12 years of experience. Whether you’re ready to start next month or just pricing a full kitchen remodeling job, the estimate is free.
Written by the team at Groundwork Construction Co.












