







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence in Torrance, CA: What It Costs and How Long It Takes
A wrought iron fence in Torrance typically runs $3,500 to $9,000, installed, and most residential jobs take 2 to 5 working days from tear-out to final walkthrough. That range covers a standard front-yard run with a matching pedestrian gate; longer property lines, custom fabrication, or driveway gates push it higher. Call (888) 345-8164 for a free on-site estimate with a written, line-item number.
How an Iron Fence Goes In, Stage by Stage

Iron fencing isn’t a picket-and-screw job. It’s a masonry-and-metal installation with its own sequence, and knowing the order helps you plan around it.
Stage 1: Site walk and layout (day 1, about an hour)
We walk the property line with you, confirm where the fence runs, where gates land, and where existing utilities cross. You decide the panel style and height here. In Torrance, we also check the property line against your plat or survey before anything gets marked, because tract lots here sit close together and a fence set a foot off is a problem you can’t fix later without tearing it out.
Stage 2: Demolition and post layout (day 1, 2 to 5 hours)
Old fencing, footings and all, comes out. Then we string-line the new run and mark post centers on 6 to 8 foot spacing. This is the stage where the job either goes smoothly or gets expensive, because we don’t know what’s underground until we’re in it. In older Torrance tracts, that’s often an original hose bib run or a stray footing from a fence that went in decades ago.
Stage 3: Footings (day 1 into day 2)
Posts go into concrete footings, typically 18 to 24 inches deep and 8 to 10 inches around for a standard 4- to 5-foot iron fence. Gates and taller sections get bigger footings. Nothing gets set above grade; posts sit on a base plate or are set proud of the concrete so water can’t wick into the metal. The concrete needs to cure before the panels go on, so this is where a 2-day job turns into a 4-day job and that’s normal, not a delay.
Stage 4: Panel and gate hang (day 3, most of the day)
Rails and pickets go up, gates get hung and adjusted for swing and latch. You decide at this point whether you want a self-closing hinge or a keyed latch on the pedestrian gate. This is also when we check every panel for plumb and rack the fence to follow grade if your yard slopes.
Stage 5: Finish, walkthrough and touch-up (day 4 or 5)
We touch up welds and scratches, clean up the site, and walk the fence with you line by line. Anything off gets corrected before we leave, and the 730-Day Done Right Promise covers the workmanship from that day forward.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Iron fence isn’t one product. The choices below are the ones that actually change how the fence looks, how long it lasts in Torrance’s salt air, and what it costs.
- Wrought iron vs. tubular steel. True wrought iron is heavier, hand-forged, and the more expensive option, often toward the top of the $3,500 to $9,000 range. Tubular steel is lighter, comes in standard panels, and is the more common choice for residential runs. Tubular steel is a solid fence; it just doesn’t have the mass or the forged detail of wrought iron.
- Powder-coated vs. painted finish. Powder coating costs more up front but holds up far better against coastal fog and salt spray, and it doesn’t need repainting every few years. Site-painted finish is cheaper and easier to touch up later, but in Torrance you’ll be repainting sooner.
- Height and picket spacing. Standard residential height runs 4 to 5 feet. Shorter means fewer pickets and lower cost; taller means more material and heavier footings. Tighter picket spacing looks more solid and costs more per linear foot.
- Gate configuration. A single pedestrian gate is the baseline. Adding a driveway gate, a self-closing hinge, or a keyed latch each adds cost. Decide gate placement at layout, not after the footings are poured.
- Decorative elements. Finials, scrollwork and custom panels add visual weight and cost. They’re worth it on a front-yard run; usually not worth it on a back property line.
If your iron fence is part of a full Fence Installation in Torrance project that includes a matching side or back run, we’ll quote the whole scope together so the pricing stays consistent. Homeowners often pair this with Patios, Walkways & Pool Decks in Torrance when the same yard work is already underway, since the equipment and crew are already on site.
What Iron Fence Costs in Torrance, CA

Expect $3,500 to $9,000 for a standard residential iron fence in Torrance. The low end is a short front run in tubular steel with a single gate. The high end is a long property line in wrought iron with decorative panels and a driveway gate.
Five things move that number:
- Linear footage. It’s the biggest driver. Every additional 10 feet of fence adds material, footings and labor.
- Existing conditions. Tearing out an old fence, breaking up old concrete footings, or working around buried utilities adds labor hours you can’t see until demo day.
- Material grade. Tubular steel vs. wrought iron, powder coat vs. paint. This is the second-biggest swing.
- Gate count and hardware. Each gate adds a frame, hinges, latch and a heavier footing.
- Permit and inspection scope. A fence over a certain height or along a property line that touches a corner lot may need a permit in Torrance. That adds time and a permit fee to the job.
A written estimate from us covers tear-out, footings, posts, panels, gates, hardware, cleanup and disposal. It does not cover property line survey work if you don’t have one, and it doesn’t cover landscaping repair if fence removal disturbs plantings. Those get flagged in the quote if they apply, so there’s no surprise later. The number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Torrance Homes Specifically Do to This Job
Torrance is a master-planned, post-war company town, and its housing stock shows it: most of what we work on is 1950s to 1970s single-family tract homes on simple slab-on-grade foundations. That matters for iron fencing in two ways. First, the original property lines rarely have an existing survey on record, so layout takes longer and you may need one before we order materials. Second, the soil under those tracts has been worked over for decades; old fence footings, irrigation lines and hose bibs show up more often than you’d expect when we start digging.
The Torrance climate is on your side for scheduling. The marine fog and light rainfall mean exterior work rarely gets weather-delayed the way it does inland, so a 4-day job usually stays a 4-day job. But that same salt air near the coast is the reason finish choice matters here more than it would in Riverside: powder-coated iron holds up, site-painted iron doesn’t.
One more thing specific to the older tracts: the city enforces its own residential design standards on fences, and setbacks and height limits are checked at inspection, not overlooked. We pull the permit when the scope requires it and pass the inspection before we call the job done. Homeowners often pair this with ADU Design & Permitting in Torrance when an accessory unit and a new fence line are going in the same project, since both need to clear the same planning review.
We handle iron fence work across Torrance, including the 90510, 90503, 90505 and 90501 ZIP codes. If you’re outside those, the Torrance service-area page covers what we do nearby.
Serving Torrance, CA – Our Local Coverage Area
We serve Torrance and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Iron Fence in Torrance

Most residential iron fence jobs take 2 to 5 working days. Two days covers a short front run with one gate; longer property lines with multiple gates and custom panels land at four or five days, largely because the concrete footings need to cure before the panels go on. Call (888) 345-8164 for a timeline estimate specific to your property.
In some cases, yes. Fences over the standard height, or along a corner or property line with specific setback rules, may require a permit and an inspection in Torrance. We check the scope against the city rules before we quote, and if a permit is needed we pull it and pass the inspection as part of the job. Call (888) 345-8164 and we’ll tell you what applies to your lot.
Residential iron fence in Torrance runs $3,500 to $9,000 installed, depending on footage, material grade, gates and permit scope. Call (888) 345-8164 for an exact quote; estimates are free.
Usually, yes. We string-line the run and confirm where utilities and irrigation cross before we dig, and fence lines can typically be routed around existing plantings. If a hose bib or irrigation line sits directly on the fence line, we’ll flag it in the estimate so you can decide whether to reroute it. Call (888) 345-8164 to set up the site walk.
Every iron fence we install is covered by the 730-Day Done Right Promise. If something isn’t right, we make it right, for two full years from the walkthrough. Call (888) 345-8164 to schedule your free estimate.
Get a Free Iron Fence Estimate in Torrance
Call (888) 345-8164 to schedule a free on-site estimate for your iron fence in Torrance. We’ll walk the property line, confirm gate placement and height, and leave you with a written, line-item quote that covers tear-out through cleanup, plus the 730-Day Done Right Promise in writing. A live person answers any time, day or night. No pressure, no sales pitch, just a real number for your yard.
Written by the team at Groundwork Construction Co.












