







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Lomita, CA: What It Costs and How Long It Takes
An aluminum fence in Lomita, CA runs $4,000 – $10,000 for a typical residential property, with the lead range landing at $3,500 – $9,000 for smaller runs on a standard 5,000 – 6,000 sq ft lot. Most jobs take two to four working days from demo to final walkthrough. Call (888) 345-8164 and we’ll set a free on-site estimate so you get a written, line-item number instead of a guess.
How We Install an Aluminum Fence in Lomita, Stage by Stage

Aluminum doesn’t corrode the way steel does, but on lots near Pacific Coast Highway and Lomita Boulevard the salt-laden marine air still attacks the wrong hardware first – the fasteners, the post anchors, the gate hinges. That drives how we sequence the work here.
Stage 1: Site walk and layout (2 to 3 hours)
We measure the run, check where the property line actually sits, and flag the easements, sprinkler lines, and buried utilities that almost always cross an old Lomita lot. You decide the fence line and confirm it against your plat or survey before anything gets marked. If the fence borders a neighbor, this is the point to have that conversation.
Stage 2: Demo and post-hole excavation (half a day to a day)
Old wood or failing fencing comes out, and we dig the post holes to the depth the footer and wind load require. On a tight infill lot this is where we discover the surprise – a root system, a forgotten concrete walkway, or an old footer from a fence that predates your house. You’ll hear from us before we price a change, not after.
Stage 3: Concrete footers (one day, then cure)
Posts get set in concrete and we let them cure before hanging panels. Skip the cure and panels sag out of line within a season. This is a fixed step, not a shortcut we take to leave early.
Stage 4: Panel and gate installation (one to two days)
Rails, pickets, and gate hardware go on. This is the stage where salt-resistant hardware matters most – stainless gate hinges and coated fasteners last years longer than the standard zinc-plated parts that fail first along the coast. You pick gate swing, latch style, and post caps here.
Stage 5: Final walk and inspection (1 to 2 hours)
We check plumb, panel spacing, gate alignment, and clean up the site. You walk the fence with us and sign off. If your permit requires a final inspection, we coordinate that schedule as part of the job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Aluminum Fence Options You’ll Choose Between
Aluminum fencing isn’t one product – the grade and finish you pick is the biggest driver of both cost and how the fence holds up in the South Bay’s marine air.
- Residential-grade vs. heavy commercial-grade aluminum: residential runs thinner walls and suits a standard backyard; commercial-grade holds up better to wind load, dogs leaning, and the occasional bump. It adds cost and weight, and it’s the right call if the fence fronts a busy street or borders a corner lot.
- Powder-coat finish: the factory powder coat is what keeps the aluminum from pitting in coastal air. Standard black is the most forgiving to scratches and easiest to touch up; bronze and white are popular but show wear faster. PGT and similar exterior brands build their coatings to hold up in coastal conditions – worth asking about when you compare quotes.
- Picket vs. flat-top panel vs. ornamental styles: a flat-top panel reads modern and hides less of the yard; ornamental gives you a traditional look; picket spacing drives how much privacy you get and how the dog stays put.
- Rackable vs. level panels: rackable panels follow a slope, which most Lomita yards have. Level panels with step-downs are cleaner on flat runs and cost less. If your lot has a rise, rackable is worth the upcharge.
- Gates and hardware: stainless hinges and a self-closing latch are the upgrade that saves you a repair call two years in. Standard hardware corrodes first.
What an Aluminum Fence Costs in Lomita, CA

Expect $4,000 – $10,000 for a residential aluminum fence in Lomita, and $3,500 – $9,000 for a smaller, simpler run. That range covers material, demo of the old fence, footers, and installation.
What pushes a job toward the low end: a short run under 100 linear feet, level ground, easy access, and standard black powder coat. What pushes toward the high end: a long property line, rackable panels on a slope, a gated driveway entry, commercial-grade aluminum, or a permit that requires a survey and final inspection. Old fencing removal adds cost. So does working around a mature root system or a buried concrete walkway.
What’s included in our written estimate: material, labor, footers, demo, and haul-away. What typically isn’t: survey work, engineering if your permit requires it, and any landscaping repair after excavation. Those show up as separate line items so you see the number before we start. The price you see is the price you pay – no change-order surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Lomita Homes and the City Specifically Do to This Job
Lomita is roughly one square mile, fully built out and surrounded by Torrance – there’s no new subdivision land here, so every aluminum fence we install is going onto an existing lot. The housing stock is mostly 1920s – 1950s bungalows on tight 5,000 – 6,000 sq ft parcels, which means the fence line is worked out lot-by-lot, often against a neighbor’s property line and a rear setback already pushed to its limit. Permits go through the City of Lomita’s own building department, and fence permits depend on height and location, so we confirm the requirement for your specific run before we order material. On the small lots near the PCH and Lomita Boulevard corridors, that plan-check step matters. The marine fog and salt in the air also mean stainless hardware and a proper powder coat aren’t optional here – they’re the difference between a fence that lasts and one that corrodes at the hinges within a couple of years. For the wider project this often ties into, see Fence Installation in Lomita.
Serving Lomita, CA – Our Local Coverage Area
We serve Lomita and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Aluminum Fence in Lomita

Two to four working days for a typical residential run, with concrete cure time adding a partial day. A longer property line or a rackable-panel install on a slope can push it to five. Call (888) 345-8164 for a free estimate and a real timeline for your lot.
Fence permits in Lomita depend on height and placement, so we verify the requirement for your specific run before we order material. We handle the permit application and coordinate the final inspection. Call (888) 345-8164 and we’ll tell you what your property needs.
Not the aluminum itself, but it will corrode the wrong hardware fast. That’s why we spec stainless hinges, coated fasteners, and a factory powder coat on every job. Call (888) 345-8164 to walk through material options for a coastal Lomita lot.
Yes, we match most existing aluminum profiles and powder-coat colors, and we can work to HOA specs. Bring your HOA submittal guidelines to the estimate and we’ll build the quote around them. Call (888) 345-8164 to schedule.
Our workmanship is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. Material warranties come from the manufacturer and depend on the grade you choose. Call (888) 345-8164 for exact coverage on your estimate.
Get Your Free Aluminum Fence Estimate in Lomita
Call (888) 345-8164 to schedule a free on-site estimate for your aluminum fence in Lomita. We’ll measure the run, confirm setbacks and permit needs, and hand you a written, line-item quote with no pressure. Homeowners often pair a new fence with Driveway Repair & Replacement in Lomita or new hardscape from our Patios, Walkways & Pool Decks in Lomita work, and we’re glad to quote those alongside the fence. You can also see our Fence Installation service or browse the full Lomita service area to see everything we handle. Estimates are free.
Written by the team at Groundwork Construction Co. of Long Beach.












