







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Lomita: What It Costs and How Long It Takes
Backsplash, tile & flooring work in Lomita typically runs $14,000 – $45,000 when it’s part of a full kitchen surface overhaul, with a backsplash alone at $800 – $2,500 and a kitchen floor replacement landing in the middle of that range depending on tile and square footage. Most Lomita jobs take two to four weeks from demo to grout, and the schedule holds tighter when the layout stays put. Call (888) 345-8164 for a free on-site estimate and a written line-item quote.
How We Run a Tile and Flooring Job in Lomita, Stage by Stage

Tile work fails on prep, not on the tile. Here’s the sequence we follow on a Lomita backsplash, tile & flooring project, and where you make decisions along the way.
Stage 1: Demo and substrate inspection (1 – 2 days). We pull the old backsplash, flooring, and any damaged drywall or underlayment. This is where surprises live in older Lomita bungalows – soft drywall behind a 1950s backsplash, or a floor that was leveled with three layers of vinyl over plywood. You decide here whether to replace damaged substrate or patch it. We don’t tile over rot.
Stage 2: Layout and material staging (1 day, sometimes combined with demo). We dry-lay tile and mark the layout before a single thinset bag opens. Grout line widths, where cuts land at the range and sink, and how the floor pattern meets the cabinet toe kick all get settled now. You approve the layout in the room, not on a sample board.
Stage 3: Backer board and waterproofing (1 – 2 days). Cement backer board goes down on floors and up behind wet-area backsplash runs. A roll-on waterproofing membrane goes over it in the splash zone behind the sink and range. This stage is invisible when we’re done and it’s the reason the job lasts.
Stage 4: Setting tile (2 – 4 days depending on square footage and pattern). Floors first, then backsplash, so we’re not kneeling on fresh wall tile. Large-format floor tile moves fast; a herringbone backsplash or a mosaic with a lot of small pieces takes longer and the labor shows up in the price. You’ll be out of the kitchen during this window – plan for it.
Stage 5: Grout, seal, and final walkthrough (1 – 2 days). Grout cures, we seal natural stone and porous tile, reinstall outlets and switch plates, and walk the job with you. Anything that isn’t right gets flagged before we leave. Every job carries our 730-Day Done Right Promise, so if a grout line cracks or a tile pops in the first two years, we come back.
That’s a realistic two-to-four week calendar for a Lomita kitchen tile and backsplash job. Add a week if the floor has to come up to the joists or if you’re changing the layout.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Material Choices That Actually Drive Your Result
Most of the decisions on this job come down to a handful of real-world trade-offs. Here’s how we walk Lomita homeowners through them.
- Porcelain vs. ceramic floor tile. Porcelain is denser, handles moisture better, and takes a beating in a kitchen – it’s the standard for a reason. Ceramic costs less and looks nearly identical on a wall, but we steer it off the floor in high-traffic kitchens.
- Large-format vs. mosaic backsplash. A 12×24 or larger tile means fewer grout lines to clean and a calmer look. A small mosaic or penny round has more character but more grout, more cleaning, and more labor to set. Both work; the trade-off is maintenance vs. design push.
- Natural stone vs. porcelain slab. Marble and travertine look unmatched but need sealing and will etch from lemon juice and vinegar. Porcelain slabs mimic stone closely, cost less to maintain, and don’t stain the same way. For a busy Lomita kitchen, porcelain usually wins.
- Grout choice. Sanded cement grout is affordable and forgiving; epoxy grout costs more but resists staining and doesn’t need resealing. In a kitchen, epoxy grout on the backsplash pays for itself.
- Trim and fixtures. A new sink or faucet means cutting different holes in the counter, which affects the tile layout around it. If you’re swapping fixtures anyway, a Delta or Blanco sink and faucet combo is a good moment to do it – just decide before Stage 2, not Stage 4.
What Backsplash, Tile & Flooring Costs in Lomita, CA

A full kitchen backsplash, tile & flooring package in Lomita runs $14,000 – $45,000 when it’s paired with cabinetry or counter work, and a standalone backsplash replacement is $800 – $2,500. Here’s what moves a job from the low end to the high end.
- Square footage. A small bungalow kitchen at 80 sq ft of floor and 30 linear feet of backsplash sits at the low end. A remodeled kitchen with a large island and full-height backsplash pushes toward the high end.
- Tile grade. Builder-grade ceramic at $3 – $6 per sq ft is a different job than imported porcelain or stone slab at $15 – $40 per sq ft.
- Demo and substrate condition. Tile over sound substrate is fast. Rotted drywall, water-damaged subfloor, or three layers of old flooring adds days of labor and disposal.
- Layout changes. Moving a sink, range, or outlet means plumbing and electrical work before tile goes down. That’s a permit item in Lomita and it changes the schedule.
- Pattern complexity. Straight-set and grid layouts are the most efficient. Herringbone, chevron, and mosaic patterns add 20 – 40% in labor.
A written estimate from us breaks out demo, substrate prep, materials, setting labor, grout and seal, and disposal line by line. What’s typically not included: plumbing or electrical relocation, cabinet or counter replacement, and any structural repair found under the floor. We flag those before work starts, not after. The number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Lomita Homes Specifically Do to This Job
Lomita is a roughly one-square-mile city, fully built out and surrounded by Torrance, which means almost every backsplash, tile & flooring job here is a remodel inside an existing footprint – there’s no new construction to speak of. The housing stock we work on most is 1920s-to-1950s wood-frame bungalows and early tract homes on 5,000 – 6,000 sq ft lots, plus 1960s – 70s stucco apartments along the Pacific Coast Highway and Lomita Boulevard corridors. Those older kitchens mean we regularly find soft drywall behind backsplashes, galvanized plumbing that’s due for replacement, and floors leveled with layers of old vinyl.
The local constraint that shapes scheduling more than anything is the City of Lomita’s own building department and plan-check process, which is smaller and more lot-specific than what you’d see in sprawling Torrance or unincorporated county territory. If your tile job involves relocating a sink or moving electrical, expect a permit pull and an inspection – that’s a real calendar item, not a formality. The marine layer and salt air off the South Bay matter too: behind exterior walls and in any moisture-prone corner, we use cement backer board and a waterproofing membrane rather than greenboard, because damp fog finds its way in. If you’re pairing this with a bathroom update, homeowners often add a Tub-to-Shower Conversion in Lomita while the tile crew is already on site, and a Vanities, Tile & Fixtures in Lomita refresh is a natural companion job. If your backsplash and floors are part of a wider scope, see our Kitchen Remodeling in Lomita page, or call us directly for the tile work alone. We cover all of Lomita and the surrounding South Bay.
Serving Lomita, CA – Our Local Coverage Area
We serve Lomita and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Backsplash, Tile & Flooring in Lomita

Most Lomita jobs take two to four weeks from demo to final seal. A backsplash-only job runs three to five days; adding a kitchen floor brings it to two to three weeks, and layout changes or substrate repair extend it further. Call (888) 345-8164 for a schedule based on your actual kitchen.
Cosmetic tile and backsplash replacement generally doesn’t require a permit; relocating a sink, moving electrical, or structural changes do. The City of Lomita’s building department reviews those on a lot-by-lot basis. We handle the permit pull and inspection when the scope calls for it, and we tell you upfront which side of that line your job sits on.
Yes, and it’s the most common scenario we run in Lomita. A same-layout backsplash and floor replacement avoids permits, cuts days off the schedule, and keeps the price toward the low end of $14,000 – $45,000 for a package job or in the $800 – $2,500 range for backsplash alone. Call (888) 345-8164 if you want to explore a layout change before deciding.
Backsplash replacement alone runs $800 – $2,500, and a full kitchen tile and floor package inside a broader remodel runs $14,000 – $45,000. Material grade, square footage, substrate condition, and pattern complexity move that number most. Call (888) 345-8164 for an exact quote – estimates are free and we put it in writing.
Every backsplash, tile & flooring job we do in Lomita is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers workmanship for two full years. Call (888) 345-8164 with any question about coverage before you book.
Get a Free Tile and Flooring Estimate in Lomita
We’ll come to your Lomita home, measure the kitchen, look at what’s behind the existing tile and under the floor, and give you a written line-item estimate with no charge and no pressure. The number you see is the number you pay, and projects over $10,000 get $1,000 off with 0% financing for 18 months available. Call (888) 345-8164 – a live person answers around the clock.
Written by the team at Groundwork Construction Co.












