A Groundwork company - serving Long Beach, CA
A home with a brand-new roof and gutters at golden hour
Metal Roofing · Lomita, CA

Metal Roofing in Lomita - Written Price, Workmanship Warranty

Free roof inspection with photos, then an itemized written price before anything is ordered. Installed by a licensed local professional and backed by a workmanship warranty.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Long Beach
A new clay tile roof
A newly finished roof with a ridge vent and step flashing
A new concrete driveway with a paver border
A stone counter, tile backsplash and open shelf after a kitchen remodel
A remodeled hall bathroom with subway tile and a floating vanity
A garage converted into a guest room and home office
A new casement window over a kitchen sink
A new white vinyl privacy fence with a double gate
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Metal Roofing in Lomita, CA: What It Costs and What’s Involved

Metal roofing in Lomita typically runs $15,000 to $40,000 for a full installation, and most homes here are done in three to six working days once materials land on site. That range covers standing seam and exposed-fastener systems on a typical 1,200 – 1,800 sq ft bungalow on a 5,000 – 6,000 sq ft lot. Call (888) 345-8164 and we’ll walk your roofline on site and give you a written line-item quote.

Call (888) 345-8164

How a Metal Roof Goes On, Stage by Stage

A standing-seam metal roof over a covered porch

Metal roofing is a sequenced job, not a one-day swap. Here’s what actually happens, and where you’ll be asked to make a call.

Stage 1: Tear-off and deck inspection (day 1)

We strip the existing shingles, tile, or old metal down to the sheathing, then walk the deck board by board. On Lomita’s 1920s – 1950s wood-frame homes, soft or split boards are common. You decide whether to overlay new sheathing or replace only the failed sections. Budget a day, sometimes a day and a half if the original deck is rough.

Stage 2: Structural and flashing prep (day 2)

Metal weighs less than tile but still needs solid fastening points. We check rafter spacing, add purlins where the panel profile requires them, and set the underlayment. Penetrations, valleys, and the wall-to-roof junctions get flashing detailed before a single panel goes up. This is the stage that decides whether the roof lasts, and you don’t see it once the panels are on.

Stage 3: Panel layout and installation (days 3 – 4)

You’ll have already chosen panel type, color, and finish. We lay out panels to minimize seams and waste, which on small, tight infill lots means measuring twice. Standing seam panels are rolled to length and run full slope. Exposed-fastener panels go down faster and cost less. Either way, panels are screwed or seamed per manufacturer spec.

Stage 4: Trim, ridge, and detail work (day 5)

Ridge cap, gable trim, drip edge, and any vent flashing get installed. We also seal and finish all penetrations. This is where a cheap job shows, and where a good one pays off for the next 40 years. You’ll want to look at the finished trim lines before signing off.

Stage 5: Inspection and walkthrough (day 5 or 6)

We pull the City of Lomita permit before work starts, so the final sign-off is scheduled with the local inspector. Then we do a walkthrough with you, clean the site, and hand off the manufacturer warranty packet and our 730-Day Done Right Promise paperwork in writing.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Options You’ll Choose Between

Metal roofing is not one product. Here’s what Lomita homeowners actually pick between, with honest trade-offs.

  • Standing seam (the premium pick): Hidden fasteners, clean vertical lines, no exposed screws to back out over time. Runs $18,000 – $40,000 on a typical Lomita roof. Best choice for salt air since there are fewer penetration points to corrode. Worth the upcharge on homes that will stay in the family.
  • Exposed-fastener panels (the value pick): Screwed through the face with washers. Cheaper at the low end of the range, around $15,000 – $25,000. The trade-off: washers and screws need inspection every few years, and in Lomita’s salt air, that faster corrodes. We specify coated fasteners to slow it down.
  • Galvalume steel vs. aluminum: Steel with a metallic coating is the standard. Aluminum costs more but hangs tougher near the coast. On the small lots off Pacific Coast Highway, where marine layer sits longer, aluminum is often the smarter long play. We’ll walk you through the cost difference in the estimate.
  • Stone-coated steel (the “tile look”): Stamped to mimic barrel tile or shake. A popular pick where an HOA or neighbor expects a traditional profile. Runs in the middle of the range. Heavier and costs more than plain exposed-fastener, but hides salt stains better on a light-colored finish.
  • Color and finish: Kynar-based coatings hold color longest in salt air. Light colors reflect the summer heat. Darker tones look sharper but show chalk and salt more. Choose the finish you want to look at for 30 years.

What Metal Roofing Costs in Lomita, CA

Roofers installing a new roof with safety harnesses

Most Lomita metal roof installations land between $15,000 and $40,000. The low end is a modest single-story bungalow with a simple gable and exposed-fastener panels. The high end is a larger or more complex roof with standing seam, aluminum panels, and structural repair underneath.

What moves the number:

  • Roof size and pitch: Every extra square of area and every steep section adds labor. A steep second story over a low-slope porch is more work than a simple ranch.
  • Existing roof condition: If the deck has rot, or there are layers of old roofing to strip, that’s added tear-off and sheathing cost.
  • Panel type: Standing seam over exposed-fastener is the single biggest jump in the range, often $4,000 – $8,000 on a standard Lomita roof.
  • Penetrations and complexity: Skylights, chimneys, valleys, and dormers extend the install by a day or more and add flashing cost.
  • Permit scope: A straightforward re-roof permit is one thing; structural reinforcement or a tear-down-and-rebuild scope pulls the City of Lomita’s plan-check into the picture, which adds time.

A written estimate from us includes tear-off, underlayment, panels, fasteners, flashing, trim, permit pulling, final inspection, and the 730-Day Done Right Promise. It does not include structural repair discovered under the deck, which we quote separately before doing it so there are no surprise change orders.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Lomita Homes Do to This Job

Lomita is a small, fully built-out Harbor Gateway city, and that changes the trade. Most of what we do here is re-roofing on 1920s – 1950s bungalows and mid-century stucco homes on lots that are 5,000 – 6,000 sq ft. There’s no new subdivision work; there’s tear-off, deck repair, and trim work, done on tight lots. Permits run through the City of Lomita’s own building department, layered on top of LA County’s coastal-area rules, so plan check can take longer than it would in sprawling neighboring Torrance.

The bigger factor for metal is salt air. Marine layer and salt-laden air corrode fasteners, flashing, and older exposed-fastener screws faster than you’d see inland. On homes along Lomita Boulevard and Pacific Coast Highway, we spec coated or stainless fasteners and aluminum panels where the budget allows. We check for it in every estimate: fastener corrosion on the existing roof, stucco cracking at wall junctions, and failed flashing at chimneys. Homeowners often pair a metal roof with Window Replacement in Lomita or Impact Windows & Doors in Lomita to lock down the whole envelope at once. It’s part of a full Roofing in Lomita scope for some homes, but if you just need metal, we stay narrow.

Serving Lomita, CA – Our Local Coverage Area

We serve Lomita and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked – Metal Roofing in Lomita

New painted shaker cabinets with an organized deep drawer

Get a Metal Roofing Estimate in Lomita

Metal roofing in Lomita runs $15,000 – $40,000, and the right number comes from standing on your roof, not a phone quote. Call (888) 345-8164 and we’ll schedule a free on-site estimate. We pull the City of Lomita permit, pull the final inspection, and back the whole job with our 730-Day Done Right Promise. Upfront pricing, no surprises, written line-item quote in hand. Live person, 24/7.

Written by the team at Groundwork Construction Co.

Why Lomita Chooses Groundwork Construction Co. of Long Beach

We set the standard for metal roofing in Lomita.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Lomita

Getting your metal roofing project started is simple.

1

Call or Request a Free Estimate

Tell us about your metal roofing project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local metal roofing pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Lomita Customers Say

Trusted by homeowners across Lomita and surrounding areas.

★★★★★

"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."

Marco Castillo
★★★★★

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

Robert Sullivan
★★★★★

"The finished work is exactly what we wanted. It did run about three weeks over, mostly waiting on a cabinet delivery that was out of his hands, though I would have liked more updates during that stretch."

Dev Sharma

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A freestanding soaking tub in a remodeled primary bathroomA second-story addition that matches the existing rooflineA new front entry door with glass sidelightsA new black aluminum pool fence with a gateA new curved paver walkway to the front porchA galley kitchen opened up to the dining room with a new peninsula

More services in Lomita

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Groundwork in Long Beach

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Long Beach team

A local vetted partner works across Long Beach and the towns around it, to the same written standard as every Groundwork job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise

Ready for Metal Roofing in Lomita?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Lomita.

(888) 345-8164

Request a Free Estimate in Lomita

Tell us about your metal roofing needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch