







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Patios, Walkways & Pool Decks in Compton: What the Job Actually Involves
Patios, walkways & pool decks in Compton typically run $3,500 – $11,000 for a paver patio, with walkways and pool surrounds priced by the square foot on top of that. A standard patio takes 3 to 7 working days from demo to final joint sand; pool decks and long walkway runs push toward two weeks. We build on compacted base, not dirt, and we pull permits when the scope triggers them. Call (888) 345-8164 to set up a free on-site estimate.
How a Compton Patio, Walkway or Pool Deck Gets Built, Stage by Stage

Every job follows the same five stages. What changes is how much digging the site demands, and on Compton’s small lots that’s usually the deciding factor.
Stage 1: Site walk and layout (day 1)
We mark the finished edges with string and stakes so you can stand in the footprint before anything gets cut. This is where you lock in the shape, the slope away from the house, and whether the walkway ties into a back gate or a side door. On 90220 and 90221 lots, the side-yard clearance often runs under four feet, so the layout meeting matters more here than it would on a wider lot.
Stage 2: Demo and excavation (days 1 – 2)
Old concrete, sod, or a failing wooden deck comes out and leaves in a haul-away dumpster. We dig down 6 to 8 inches for a patio and up to 10 inches where a vehicle might cross. If the existing slab is sound and stable, we sometimes pour or lay over it instead, which saves a day and a few hundred dollars.
Stage 3: Base, compaction and drainage (days 2 – 3)
This is the stage nobody sees and the one that decides whether the job lasts. We lay 4 to 6 inches of class II base rock in lifts and compact each lift with a plate compactor. Slope runs a minimum of 1 to 2 percent away from the foundation. In Compton’s shallow-slab and pier-and-beam homes, we also check where the downspouts and yard drains discharge so water isn’t pooling against the house after the first winter rain.
Stage 4: Setting the surface (days 3 – 5)
Pavers get laid on a sand bed and cut at every edge with a wet saw; concrete gets formed, poured and finished. You decide at this point whether the pattern runs herringbone, running bond, or a large-format grid. Herringbone costs more in labor because of the cut count but locks together better under foot traffic. Pool decks need the coping set first and the waterline cut tight so the finish meets the tile cleanly.
Stage 5: Joints, sealer and walkthrough (days 5 – 7)
Polymeric joint sand goes in, gets compacted into the gaps, and the surface is cleaned. Sealer is optional and adds a day of cure time. We walk the finished job with you, check the drainage with a hose, and hand over the 730-Day Done Right Promise in writing. If a paver settles or a joint fails inside that window, we come back and fix it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for a Compton Patio or Walkway
The material choice drives both the price and how the surface feels underfoot in August. Here’s the honest comparison.
- Concrete pavers (Belgard and similar): $3,500 – $11,000 for a typical Compton patio. The strongest option for our sun and soil because individual units can be lifted and reset if the base shifts. More labor to install than poured concrete, but it never cracks as a slab.
- Poured concrete with a broom or exposed-aggregate finish: the lowest cost per square foot and the fastest install. The trade-off is that Compton’s shrink-swell clay subsoil and summer heat mean control joints are mandatory, and a slab crack is permanent.
- Stamped concrete: mimics stone or brick at roughly half the price of natural stone. Surface texture fades faster under intense UV than a true paver, and resealing every few years keeps it looking right.
- Natural stone (flagstone, travertine): the premium pick for pool decks because it stays cooler under bare feet. Heavier material, more base prep, and a higher labor line.
- Pool coping: bullnose or flat, cast-in-place or precast. Cast coping gives a seamless look; precast is faster and easier to replace piece by piece later.
Drainage is the other decision. A French drain or channel drain along the low edge of the patio keeps water off the slab and away from the foundation, and it’s far cheaper to install during the build than to retrofit afterward.
What Patios, Walkways & Pool Decks Cost in Compton, CA

Expect $3,500 to $11,000 for a paver patio in Compton, with pool decks and long walkway runs landing above that. Here’s where the money actually goes.
| Line item | Typical range |
|---|---|
| Paver patio installation | $3,500 – $11,000 |
| Walkway (per linear foot, 4 ft wide) | $25 – $60 |
| Demo and haul-away of old slab or deck | $400 – $1,200 |
| Base rock, compaction and grading | $600 – $1,800 |
| Pool coping and waterline detail | $1,200 – $4,000 |
| Sealer (optional) | $250 – $700 |
Five variables push a Compton job toward the high end: the square footage and whether the shape has a lot of cuts; the condition of what’s underneath, since old root systems or buried debris add excavation time; whether the yard is accessible for a wheelbarrow and plate compactor or has to be hauled through the house; the material grade, with natural stone and imported pavers costing double standard concrete pavers; and permit scope, which we cover below. Every estimate is written line by line, so you see the base, the drainage, and the materials separately before you sign anything. The number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Compton Homes Specifically Do to This Job
Most of the single-family housing in the 90220 and 90221 core is 1940s to 1960s stucco tract homes on small R-1 lots with tight lot-line setbacks, and that layout shapes the work. Backyards are narrow, so a patio has to be laid out against the house and the fence line rather than centered in open space. Access is often through a side gate or a detached garage, which means material gets moved by hand and the crew schedule stretches by a day compared with a wide suburban lot.
The foundations matter too. Many of these homes sit on shallow slabs or pier-and-beam, and a patio that doesn’t slope away from the house will send water straight into the foundation. We check the downspout discharge and yard drainage before the base goes down. The warm, dry climate means no freeze risk and a long paving season, but the intense summer sun fades cheap sealers fast and Santa Ana wind events blow grit into open joints, so we use polymeric sand and recommend resealing every few years rather than every year.
Permits are the part homeowners ask about first. A ground-level patio or walkway usually doesn’t need one. Adding a pool, a raised deck, or a structure that alters grading near a property line often does, and Compton’s plan check on older infill lots can ask for a survey where setbacks are tight. We pull the permits and pass the inspections as part of the job. Homeowners often pair this with ADU Site Prep & Utilities in Compton when a backyard build is also on the table, or with Full Kitchen Remodeling in Compton when the yard and the interior are getting done in the same season. For the wider paving scope, see our Driveway & Pavers service, and for the full picture of what we do here, visit our Compton service area page.
Serving Compton, CA – Our Local Coverage Area
We serve Compton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Patios, Walkways & Pool Decks in Compton

A standard patio takes 3 to 7 working days, and a pool deck with coping runs 10 to 14 days including cure time. Narrow side-yard access or heavy demo can add two or three days. Call (888) 345-8164 for a schedule estimate tied to your yard.
Ground-level patios and walkways generally don’t require a permit; pools, raised decks, and grading changes near a property line usually do. We confirm the requirement during the estimate and pull what’s needed. Call us to talk through your specific scope.
Yes, in most cases. We lay out around irrigation lines, pool equipment, and existing downspouts so nothing has to be relocated. If a line sits directly in the footprint, we reroute it and price that as a line item rather than a surprise. Call for a free on-site look.
A 4-foot-wide walkway runs roughly $25 to $60 per linear foot depending on material and base depth. Concrete pavers sit in the middle of that range; natural stone and complex curves push higher. Call (888) 345-8164 for a written line-item quote.
Every patio, walkway and pool deck we build is backed by our 730-Day Done Right Promise: if it isn’t done right, we make it right. That covers workmanship and settling, not damage from tree roots or a vehicle driven over the surface. Call to have us put the details in writing.
Get a Free Estimate on Patios, Walkways & Pool Decks in Compton
We’ll walk your yard, check the access and drainage, and hand you a written line-item estimate with no pressure and no vague numbers. That’s how this works best, whether it’s a small back patio or a full pool surround. Call (888) 345-8164 and a live person answers, day or night, to schedule your free estimate. If the job is part of a full Driveway & Pavers in Compton plan, we’ll scope both together.
Written by the team at Groundwork Construction Co.












