







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Window Replacement in Long Beach, CA: What It Takes and What It Costs
Window replacement in Long Beach runs $4,500 – $15,000 for a typical whole-home job, and most single-family replacements finish in two to four days once materials land. The work involves removing the old sash and frame, checking the rough opening for rot or termite damage, setting and shimming new units, flashing and sealing the exterior, and finishing trim inside. Call (888) 345-8164 for a free on-site estimate before you commit to anything.
How Our Window Replacement Process Runs, Stage by Stage

Window work rewards planning. The jobs that go sideways are usually the ones where nobody measured the rough openings correctly or discovered hidden rot on install day. Here’s the sequence we follow, with realistic time frames so you know what to expect.
Stage 1: In-home measure and scope (day 1, about 90 minutes)
We measure every opening, note the wall assembly (stucco over wood frame is standard in older Long Beach houses), check for existing water damage around sills and headers, and photograph anything that might complicate the job. This is when you decide window style and material. You’ll get a written line-item quote with the unit cost, labor, and any repair allowances spelled out. Upfront pricing, no surprises.
Stage 2: Order and permit (week 1 – 3)
Standard-size vinyl or fiberglass units typically arrive in two to three weeks. Custom sizes and wood-clad products from Andersen or Marvin run four to six weeks. If your home is in a Coastal Zone or a designated historic context, plan for an extra two to four weeks of review before the permit clears. We handle the permit application and the inspection scheduling; you don’t chase the city.
Stage 3: Site prep and demo (day 1 of install, 2 – 4 hours)
We lay drop cloths, move furniture back from the walls, and remove the old sash and frame one opening at a time. That one-at-a-time approach matters: it means your house is never wide open to the weather, which is a real concern when the marine layer rolls in off the Port. Any rot or termite damage found behind the frame gets flagged and quoted before we proceed.
Stage 4: Set, shim, flash, and seal (days 1 – 3, the bulk of the work)
Each unit gets shimmed plumb and level, fastened per manufacturer spec, flashed at the head and sill, and sealed with exterior-grade caulk. Interior trim goes back on and gets caulked and filled. A whole-house job with eight to twelve openings usually takes two to three working days; a smaller job of four or five windows often finishes in a single visit.
Stage 5: Inspection and walkthrough (day 3 – 4, about an hour)
We walk every opening with you, demonstrate the operation and locks, and confirm the city inspection has passed where one was required. You’ll get care instructions and the written workmanship terms, which on our jobs run to the 730-Day Done Right Promise. If anything isn’t right after the crew leaves, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the cost and performance difference comes down to frame material and glass package. Here’s the honest trade-off on each.
- Vinyl frames: the value pick and the most common choice on Long Beach rentals and fourplexes. Lowest cost, no painting, decent insulation. Downside: vinyl can warp in extreme heat and the color palette is limited.
- Fiberglass frames: stronger than vinyl, holds up better to the salt air corrosion that eats fasteners near the coast, and can be painted. Costs roughly 15 – 25% more than vinyl.
- Wood-clad (Andersen, Marvin): real wood inside, aluminum or vinyl cladding outside. The right call when you’re matching the original look of a 1920s Spanish Colonial Revival or Craftsman bungalow. Highest cost and longest lead time.
- Glass package: double-pane Low-E is standard now; argon fill and a better U-factor matter most on west- and south-facing walls that take afternoon sun. Skip the upgrade on shaded north walls and put the money elsewhere.
- Configuration: single-hung and slider are cheapest; casement and awning cost more but seal tighter. Fixed picture windows are the least expensive per square foot.
What Window Replacement Costs in Long Beach, CA

Whole-home window replacement in Long Beach typically lands between $4,500 and $15,000. That spread is wide because five variables do most of the moving. Here’s where the money goes.
| Line item | Typical range |
|---|---|
| Standard vinyl unit (per window, installed) | $500 – $900 |
| Fiberglass unit (per window, installed) | $700 – $1,200 |
| Wood-clad unit (per window, installed) | $1,000 – $1,800 |
| Rot or termite repair (per opening) | $150 – $600 |
| Permit and inspection | $150 – $500 |
What pushes a job to the low end: standard sizes, vinyl frames, six or fewer openings, no rot discovered, no permit required. What pushes it high: custom sizes, wood-clad units, twelve or more openings, historic-district review, and hidden structural repair behind the frame. A written estimate lists unit cost, labor, permit, and a clearly stated repair allowance. What it usually doesn’t include is rot repair beyond the allowance or interior painting, and we say so up front rather than surprise you at the end.
See the difference
Before
After
Before
After
Before
AfterWhat Long Beach Homes Specifically Do to This Job
Long Beach is where very old housing stock meets very new regulation, and window replacement sits right in the middle of that collision. In Rose Park and Belmont Heights you’ll find pre-1933 bungalows and Craftsman fourplexes inside a Coastal Zone and a designated historic context, so the same small lot can trigger Coastal Commission review, historic-district design review, and seismic retrofit rules together. That’s a permitting stack you simply don’t hit inland in Compton or Carson, and it directly affects window work: exterior appearance and glazing style may need to match the historic pattern, which rules out some of the cheapest replacement units and adds review time.
The marine layer and salt air off the Port of Long Beach accelerate corrosion and rot on exterior wood, stucco, and fasteners, so we open up around every frame expecting to find soft sill stock on the ocean-facing walls. On the dense 1950s – 70s stucco fourplexes and garden apartments, original single-pane aluminum sliders are at end of life and leaking air; that’s the bulk of the multi-family work we see. Termites and moisture intrusion in the older wood-frame bungalows are a constant companion to window replacement. If the wider project also touches siding or an entry, that’s part of a full Windows & Doors in Long Beach scope we can quote together. We cover the whole city, so check our Long Beach service page for the neighborhoods we reach.
Serving Long Beach, CA – Our Local Coverage Area
We serve Long Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Window Replacement in Long Beach

A whole-house job of eight to twelve windows takes two to four working days on site, plus two to six weeks of lead time for materials and any permit or historic review. The install itself is fast; the waiting is what homeowners underestimate. Call (888) 345-8164 for a timeline based on your actual windows.
Yes, in most cases a permit is required when you change the size of an opening or the window unit itself, and historic or coastal-context properties may need design review on top of that. We pull the permit and schedule the inspection as part of the job. Call us and we’ll tell you what your specific address is likely to need.
Almost always yes. A standard replacement swaps the unit inside the existing rough opening without touching plumbing, wiring, or framing, as long as the opening is sound. Structural work only enters the picture if we find rot or a compromised header, and we stop and quote that before proceeding.
Expect $4,500 – $15,000 for a whole-home job, with per-window installed costs from $500 for standard vinyl up to $1,800 for wood-clad. Size, frame material, glass package, and hidden repair decide where you land. Call (888) 345-8164 for an exact written quote; estimates are free.
Every window replacement we do is covered by the 730-Day Done Right Promise: if the installation isn’t right, we come back and make it right. Manufacturer warranties on the units themselves vary by brand, and we hand you the paperwork for each. Our technicians have up to 12 years of experience on this kind of work.
Get a Free Window Replacement Estimate in Long Beach
Call (888) 345-8164 to schedule a free on-site estimate for window replacement in Long Beach. A live person answers around the clock and books a time that works for you. We measure every opening, flag any rot or permit complications, and hand you a written line-item quote with upfront pricing. Ask about $1,000 off projects over $10,000 and 0% financing for 18 months. If you’re also reworking the yard, homeowners often pair this with Vinyl Fence in Long Beach or Aluminum Fence in Long Beach, and we’ll quote it all in one pass through our Windows & Doors service.
Written by the team at Groundwork Construction Co.












