A Groundwork company - serving Long Beach, CA
A home with a brand-new roof and gutters at golden hour
Gutters & Accessories · Compton, CA

Gutters & Accessories in Compton - Written Price, Workmanship Warranty

Free roof inspection with photos, then an itemized written price before anything is ordered. Installed by a licensed local professional and backed by a workmanship warranty.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Long Beach
A newly finished roof with a ridge vent and step flashing
A standing-seam metal roof over a covered porch
A finished backyard cottage with a small covered porch
A new multi-panel patio door opening a kitchen to the patio
A new stained cedar privacy fence
A new paver patio with a seat wall and fire pit
A remodeled primary bathroom with a soaking tub and walk-in shower
A single-story rear room addition with tall windows and a new patio
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Gutters & Accessories in Compton, CA: What the Job Actually Involves

Replacing gutters and accessories on a typical Compton home runs $1,400 to $4,200 for a full run of seamless aluminum with downspouts, hangers and leaf guards, and most single-story homes are torn off and rehung in one day. Two-story homes or anything with fascia damage push it to two days. The phone number for a free on-site estimate is (888) 345-8164. Below is what happens on the job, what your choices cost, and why Compton’s older stucco homes fail the way they do.

Call (888) 345-8164

How a gutter job moves from first walk to final hanger

New architectural shingles with a clean valley

The sequence matters more than the sales pitch, so here it is in the order we work it.

Step 1: Load-in and roof edge inspection (under an hour). We start at the fascia, not the gutter. On Compton’s 1940s-1960s stucco homes, the fascia board behind the old gutter is often soft from years of overflow, and you can’t see that until the old run comes off. We check the roof edge, the drip edge, and the shingle course where water exits. You decide here whether we’re hanging new gutters onto sound wood or repairing fascia first.

Step 2: Tear-off and disposal (one to two hours). Old aluminum, steel or vinyl comes down and gets hauled off. We probe the fascia and the top plate with a screwdriver at every hanger location. Any rotted section gets marked and quoted as a line item before we cut into it, so you approve the number before the work happens.

Step 3: Forming and hanging (two to four hours). Seamless aluminum gets run on a machine at the curb, cut to exact length per run, and hung with a slight pitch toward the downspout. Hangers go in every 24 inches on center, closer in areas with heavy wind exposure. This is the stage where the pitch decision gets made, and it’s the single most common reason a gutter leaks at the seam instead of dropping water where it should.

Step 4: Downspouts, guards and accessories (one to two hours). Downspouts get routed and fastened, then the accessories get mounted: leaf guards, splash blocks, extensions, or a rain barrel diverter. On tight Compton side yards, the downspout route is a real decision, and we’ll walk it with you before drilling.

Step 5: Water test and cleanup (30 to 45 minutes). We run a hose at the high point of each run and watch water exit at the low point. Anything that pools, backs up or misses the splash block gets corrected before we leave. You get the final walk and the written workmanship guarantee at the same visit.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The gutter and accessory choices you’ll actually pick between

Most homeowners get handed a catalog and no guidance. Here’s the honest version of each choice.

  • Seamless aluminum (5″ or 6″ K-style): The workhorse for Compton. Light, rust-resistant, formed on site so there are no mid-run seams, and it comes in about two dozen colors. The 6″ profile handles roughly 40% more water than 5″ and is worth it on any roof plane over about 1,000 square feet. This is what we install most often.
  • Galvanized steel: Heavier and stronger than aluminum, holds up to ladders and tree limbs, but it will rust through at the seams over time in wet conditions. Suits homeowners who want a longer lifespan and don’t mind the weight and cost premium.
  • Vinyl: The cheapest option and the one we steer people away from in Southern California. Intense summer sun makes vinyl brittle, and it cracks at the hanger point within a few seasons.
  • Leaf guards (mesh, screen or reverse-curve): Mesh guards keep out leaves and most seed pods. Screen guards are cheaper and work fine for larger debris. Skip guards entirely if you have a low-slope roof section, because they’ll trap water rather than shed it.
  • Downspout accessories: Splash blocks, buried extensions, and rain barrel diverters. On a small Compton lot with a narrow side yard, a buried extension that carries water to the alley or street is often the difference between a dry foundation and a wet one.

Materials in the same family come from the same supplier tiers we use across our work, whether that’s a GAF or CertainTeed roof above the gutter line or a Techo-Bloc paver apron at the base of a downspout. You choose quality, not whichever box was on the shelf.

What gutters and accessories cost in Compton, CA

Roofers installing a new roof with safety harnesses

Line-item ranges, so you can price the job before anyone knocks on your door:

Item Typical range
Seamless aluminum gutter, per linear foot $6 – $12
Full single-story home (roughly 150 – 200 LF) $1,400 – $2,400
Two-story or complex roofline $2,400 – $4,200
Downspouts, installed $8 – $15 per LF
Leaf guards $4 – $10 per LF
Fascia repair (rotted sections) $250 – $900
Buried downspout extension $200 – $600

Four things push a Compton job toward the high end. The first is roofline complexity: a hip roof with multiple valleys and gables needs more downspouts and more careful pitch work than a simple gable. The second is fascia condition, which you can’t see until the old run is off. The third is material grade, since steel runs roughly double aluminum. The fourth is access, which on a narrow Compton side yard means a hand-carry job with no wheelbarrow or ladder staging room, and that adds labor.

A written estimate covers tear-off, disposal, seamless forming, hangers, downspouts, fasteners and a hose test. It typically does not cover fascia replacement, roof repair at the drip edge, or buried drainage lines, and each of those should be quoted as its own visible line item rather than folded into the total.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Compton homes specifically do to this job

The dominant housing in Compton is 1940s-1960s single-story stucco on tight R-1 lots, much of it infill and remodel work rather than new construction, and that history shows up right at the roofline. Fascia behind a 60-year-old gutter is often the original board, soft at the bottom edge where water has been wicking back for years. Original galvanized hardware and old hanger nails pull loose, so the new run usually gets fresh blocking. And because side-yard setbacks on these lots are narrow, running downspouts around the back of the house without landing them in a neighbor’s planter takes a real route decision, not a default.

The climate shapes the job too. Minimal freeze risk means we’re not sizing for ice dams, but intense summer sun makes vinyl fail fast and pushes aluminum expansion and contraction harder than in cooler zones. Santa Ana wind events are the other factor, and the reason we spec hangers more densely on any run facing an exposed side. Gutters usually fail on these homes at the hanger, not at the seam. If the roof edge and gutter are both aging out at once, it often makes sense to handle it as part of a full Roofing in Compton scope so the drip edge and gutter pitch get planned together, and if you’re considering a hardscape apron at the base of a downspout, our Roofing work with Quikrete and Oldcastle products pairs with that. We cover all of Compton, from the 90222 core out through 90220, and homeowners often pair a gutter refresh with Sliding & Patio Doors in Compton when water damage near the door has been a recurring problem, or with Impact Garage Doors in Compton when the full exterior envelope is getting updated at once.

Serving Compton, CA – Our Local Coverage Area

We serve Compton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently asked: gutters and accessories in Compton

A new black aluminum pool fence with a gate

Get a free gutter estimate in Compton

Call (888) 345-8164 to schedule a free on-site estimate for gutters and accessories in Compton. A live person answers around the clock, so there’s no voicemail to leave and no waiting until Monday. On the visit, we walk the roofline, check the fascia, and hand you a written estimate with every line itemized: gutters, downspouts, guards, and any fascia repair. Call today and we’ll get you priced.

Written by the team at Groundwork Construction Co.

Why Compton Chooses Groundwork Construction Co. of Long Beach

We set the standard for gutters & accessories in Compton.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Compton

Getting your gutters & accessories project started is simple.

1

Call or Request a Free Estimate

Tell us about your gutters & accessories project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gutters & accessories pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Compton Customers Say

Trusted by homeowners across Compton and surrounding areas.

★★★★★

"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."

Marco Castillo
★★★★★

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

Robert Sullivan
★★★★★

"The finished work is exactly what we wanted. It did run about three weeks over, mostly waiting on a cabinet delivery that was out of his hands, though I would have liked more updates during that stretch."

Dev Sharma

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new front entry door with glass sidelightsA new curved paver walkway to the front porchA galley kitchen opened up to the dining room with a new peninsulaA walk-in shower with large-format tile and a built-in nicheA remodeled family room with new windows and a window seatA new casement window over a kitchen sink

More services in Compton

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Groundwork in Long Beach

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Long Beach team

A local vetted partner works across Long Beach and the towns around it, to the same written standard as every Groundwork job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise

Ready for Gutters & Accessories in Compton?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Compton.

(888) 345-8164

Request a Free Estimate in Compton

Tell us about your gutters & accessories needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch