







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Torrance: What the Job Actually Costs and How Long It Takes
Cabinets & countertops in Torrance typically run $14,000 to $45,000 for a full tear-out and replacement across an average tract-home kitchen, and most jobs land at 3 to 5 weeks from demo to final caulk. New cabinet boxes and slabs alone sit in the $4,000 to $13,000 and $2,000 to $6,500 ranges respectively; the rest is layout changes, backsplash, island work, electrical, and finish carpentry. Call (888) 345-8164 for a free on-site estimate with a written, line-item price you can hold us to.
How We Run a Cabinet and Countertop Replacement, Stage by Stage

This isn’t a “we handle everything” hand-wave. Here’s the actual sequence our crews follow on a Torrance kitchen, and what you’ll be deciding at each point.
Day 1: Template and site protection
Before anything comes out, we measure every wall for square and shim the plan against reality. Torrance tract homes rarely have a perfectly plumb corner, so we record the out-of-tolerance spots now rather than discovering them after the boxes arrive. You confirm the final cabinet layout and finished floor height, which matters because a new slab can’t go in until the toe-kick height is locked. Two to three hours.
Days 2 – 3: Demo and rough-in verification
Old cabinets and counters come out, and this is where surprises live in mid-century Torrance housing stock. We check the wall behind the cabinets for water staining, confirm the supply and drain locations, and verify the electrical. If we find something that needs correcting to code before the new boxes go up, you get a written change order with a fixed price before we touch it. One to two days, longer if wiring or plumbing needs correction.
Days 4 – 7: Cabinet installation
Base and wall cabinets go in, shimmed, scribed to the wall, and leveled as a unit. You’ll pick the hardware (pulls, knobs, soft-close hinges) by now, and confirm any pantry or appliance-garage configuration. Crown molding and light rail go on after the boxes are locked. Three to four working days for a standard kitchen.
Days 8 – 12: Countertop template and fabrication
Once the cabinets are set and secure, we template for the slab. That’s the factory’s dimension of record, not a field measurement, which is why the cabinet install has to be finished first. Fabrication runs 5 to 10 business days depending on the material. This is the longest wait of the job and the one homeowners underestimate.
Days 13 – 18: Slab set, sink, backsplash, punch list
The slab goes in, the sink and faucet get cut and set, and the backsplash goes up. Final caulk at the wall and floor, appliance reconnection, and a walkthrough with you. Two to four working days, and we don’t call the job done until you’ve signed off on the punch list.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Cabinets and Countertops
Most of your money and most of your decision fatigue come from these five choices. Here’s the honest trade-off on each.
- Stock vs. semi-custom vs. custom cabinets. Stock boxes are the cheapest and fastest but only fit standard dimensions, which is a problem in a 1950s Torrance kitchen with a non-standard wall. Semi-custom (KraftMaid is the line we carry most) adjusts in 3″ increments and is usually the right answer for mid-century tract homes. Full custom fits any space but adds weeks and cost.
- Quartz vs. granite vs. butcher block. Quartz is non-porous, needs no sealing, and holds up to the South Bay humidity; it’s also the most consistent look. Granite is natural and cheaper on some slabs but needs resealing. Butcher block is warm and repairable but requires oiling and can’t take a hot pan.
- Slab thickness and edge profile. Standard is 3cm; a 2cm slab with a built-up edge saves money and looks identical from the top. Edge profiles range from a simple eased edge (cheapest) to a full bullnose or waterfall (highest), and the waterfall matters most on a kitchen island.
- Door style and finish. Shaker is the durable standard and hides wear better than flat slab doors; painted finishes show chips more than stained wood; thermofoil is the cheapest but peels in heat near a range.
- Configuration: pantry, island, appliance garage. A pantry or island can add $3,000 to $10,000, but it’s often the change that makes the kitchen actually work. We plan it before cabinets are ordered, not after.
What Cabinets & Countertops Cost in Torrance, CA

The full job range in Torrance is $14,000 to $45,000. Here’s the line-item breakdown our written estimates use, so you can see where the money goes:
| Line item | Typical range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Full kitchen remodel (cabinets & counters within) | $14,000 – $45,000 |
Five variables push a Torrance job toward the low or high end. Size is the biggest: a galley kitchen costs less than an open-plan kitchen with a peninsula and an island. Existing condition matters here more than most cities, because a 1950s Torrance home may have galvanized lines or aluminum wiring behind the cabinets, and correcting that to code adds to the number. Layout changes that move plumbing, gas, or a wall cost more than a same-footprint swap. Material grade, from painted stock to semi-custom KraftMaid with a Cambria slab, moves the price significantly. Permit scope matters too; a straight cabinet-and-counter swap usually doesn’t need one, but moving a sink or a range does.
Our estimates are written line-item, upfront pricing with no surprises, and the number you see is the number you pay unless you approve a written change order. Every job is covered by our 730-Day Done Right Promise, and we offer $1,000 off projects over $10,000 plus 0% financing for 18 months. Need to widen the scope? See our Kitchen Remodeling in Torrance page for the full project picture.
See the difference
Before
After
Before
After
Before
AfterWhat Torrance Homes Do to This Job
Torrance is a master-planned, post-war company town built by the Torrance Company, and that history is written into every kitchen we open up. Most of what we work on is 1950s – 1970s single-family tract housing: plaster walls, simple slab-on-grade foundations, and original plumbing in the older tracts. In the neighborhoods off 182nd Street and near the 90504/90503 boundary, pulling out base cabinets regularly turns up 1950s – 60s aluminum wiring and galvanized supply lines. When the walls are open, code requires bringing those up to current standard, which is a Torrance-specific surprise you should budget for. City permitting is strict on residential design standards here, so we pull the permits and pass the inspections before the final walkthrough, and we never hand you a job that fails inspection.
The marine climate plays a smaller role indoors, but salt air near the coast does accelerate corrosion on the exterior side of cabinetry and hardware, which is one reason we spec stainless and coated fasteners. If your cabinets and counters are part of a larger modernization, our kitchen remodeling service covers the full scope, and we reach across Torrance and the surrounding South Bay. Homeowners often pair this work with Walk-In Showers & Shower Remodeling in Torrance or a Tub-to-Shower Conversion in Torrance when they’re updating the whole floor.
Serving Torrance, CA – Our Local Coverage Area
We serve Torrance and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Torrance

Most Torrance cabinet and countertop jobs run 3 to 5 weeks from demo to final walkthrough, with the countertop fabrication wait of 5 to 10 business days being the longest stretch. Call (888) 345-8164 for a schedule built around your kitchen.
A straight swap in the same footprint usually doesn’t require a permit, but moving a sink, a range, or a wall does. We pull the permits and pass inspection when the scope calls for it, and we tell you upfront which side of that line your job sits on. Call (888) 345-8164 to confirm your scope.
Yes, and that’s the most common job we do in Torrance tract homes. Keeping the sink and range in place avoids plumbing and gas re-routing, which keeps the price at the low end of the $14,000 – $45,000 range. Call (888) 345-8164 for a free estimate.
The full range is $14,000 to $45,000, with cabinet installation at $4,000 – $13,000, countertops at $2,000 – $6,500, and backsplash at $800 – $2,500. What moves your number most is layout changes and correcting old wiring or plumbing behind the cabinets. Call (888) 345-8164 for an exact quote; estimates are free.
Every cabinets and countertops job we do is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right, for two full years after the job. Call (888) 345-8164 to schedule your free estimate.
Get a Free Cabinets & Countertops Estimate in Torrance
Call (888) 345-8164 and a live person answers, day or night. We’ll schedule a free on-site estimate, measure your kitchen, and hand you a written line-item quote with a fixed price and no change-order games. Our technicians are background-checked, arrive in uniform, and bring up to 12 years of experience to the job. From foundation to finish line, that’s how we build it.
Written by the team at Groundwork Construction Co.












