







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Rancho Palos Verdes, CA: What It Takes and What It Costs
Door installation in Rancho Palos Verdes typically runs $1,200 to $4,800 per door for most residential work, with custom carriage-house and oversized entry doors running higher. A standard interior or exterior door is a one- to two-day job once the unit is on site; a custom entry with sidelights, a new frame, and finish work can stretch to three or four days. Call (888) 345-8164 for a free on-site estimate and a written, line-item quote.
How Our Door Installation Process Actually Runs

Door work on premium homes isn’t a swap. It’s a small construction project with a sequence, and the sequence is what protects the door and the opening around it. Here’s the real order of operations.
Stage 1: Measure and specify (before any order is placed)
We measure the rough opening, check the frame for plumb and square, and photograph the existing condition. If the opening is out of square, which happens often in homes from the 1950s through 1990s, reframing gets priced into the written estimate before you commit. This stage takes about an hour on site, and it’s where you decide door style, material, and hardware finish. Nothing gets ordered until you’ve signed off on the line-item quote.
Stage 2: Order and lead time (two to eight weeks)
Production doors from major brands land in two to four weeks. Custom carriage-house doors, arched units, and doors with special finishes or hardware run six to eight. You’ll know the lead time in writing before the order goes in, and we schedule the install date against it rather than guessing.
Stage 3: Day one, demo and prep
Day one is removal, jambs and all. We protect the floor and surrounding trim, pull the old unit, and inspect what’s behind it. On wall-openings, that means checking the header, the sheathing, and the flashing detail, because a door that leaked for years hides rot in exactly those spots. If we find damage, you get a call before we go further, not a surprise on the final invoice.
Stage 4: Day two through three, set, shim, seal, and finish
The new door gets set, shimmed, and checked for plumb, square, and consistent reveal around all four sides. We flash the exterior, insulate the gaps, and seal the perimeter. Then comes hardware, lockset, weatherstripping, and trim. This is the slowest part of the job, and it’s where cheap installs fail: a door that doesn’t sit true will drag, leak, and never latch right.
Stage 5: Adjust and walk through
Hinges get final adjustment, the door gets a swing and latch test, and we walk the job with you. Exterior doors get a water test where appropriate. Anything that needs a follow-up adjustment gets scheduled. You get the written scope and the warranty terms, all of it under our 730-Day Done Right Promise – if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Door Options You’ll Choose Between
Most of the decision comes down to material, and each one carries a real trade-off:
- Solid wood (mahogany, oak, alder): The premium finish look and the one carriage-house doors are usually built from. It’s stunning, but it needs a recoat every few years, especially on the coastal side of the hill where salt and fog work on it. Best for covered entries and homeowners who’ll keep up with maintenance.
- Fiberglass with a wood-grain skin: Looks very close to wood, resists moisture, and holds paint or stain with far less upkeep. The honest trade-off is feel – up close you can tell, and the best brands carry a premium price. Strong choice for an exposed entry facing the weather.
- Steel: The value pick for exterior doors. Durable, secure, and it takes paint cleanly. It’s also the least interesting choice on a custom home, and dents don’t repair easily.
- Hardware and finish: Solid brass, matte black, and oil-rubbed bronze are the common finishes. Handlesets, deadbolts, and multi-point locks change both security and price; multipoint systems need a properly prepared door and preciserouting, which we quote accordingly.
- Smart locks and entry integration: Keypad and app-controlled locks are increasingly common here, and they need the door prepared to the manufacturer’s spec. We confirm compatibility before the door is ordered so the hardware fits cleanly.
What Door Installation Costs in Rancho Palos Verdes, CA

Budget $1,200 to $4,800 per door installed for most residential work in Rancho Palos Verdes. The range is wide because five things move the number:
- Door type and size: A standard interior slab sits at the bottom. An oversized, arched, or carriage-house entry sits at the top.
- Existing condition: A clean opening is straightforward. Rot, out-of-square framing, or missing flashing adds reframing and repair time.
- Material grade: Fiberglass and steel land in the middle. Solid wood and true custom builds push toward the high end.
- Hardware and locks: Basic handlesets versus multipoint locking systems and smart-lock integration.
- Permit scope: Some door work needs a permit, and that adds inspection time and a fee.
A written estimate itemizes the door, the labor, the hardware, the trim and finish, the permit if one is needed, and disposal. It should also state what’s excluded – typically any structural repair found after demo, which gets quoted as a change before work continues. Upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Rancho Palos Verdes Homes Specifically Do to This Job
The housing stock here shapes door work in ways flat inland cities don’t. Most of what we install goes into custom and semi-custom single-family homes built from the 1950s through the 1990s, and original doors have lived through decades of marine air, fog, and salt. Exterior doors on the ocean-facing side fail from the bottom up – swollen jambs, rusted hinges, and finishes that chalked out years ago.
The terrain matters too. On the steep coastal slopes, openings are often set into retained walls and graded embankments, so drainage around the door has to be right or water finds the threshold. On streets through the Portuguese Bend area and other landslide-prone zones, even a small change can require engineering review and City geologist sign-off before permits move, so door work that touches structure gets scoped carefully up front. Projects on large terraced lots often pair a new entry with a full exterior refresh – homeowners frequently combine this with Windows & Doors in Rancho Palos Verdes as part of one project, and some pair the yard-side work with a Chain Link Fence in Rancho Palos Verdes or a Vinyl Fence in Rancho Palos Verdes while the crew is on site. We handle Rancho Palos Verdes and nearby areas including Lomita, Torrance, and Carson.
Serving Rancho Palos Verdes, CA – Our Local Coverage Area
We serve Rancho Palos Verdes and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Door Installation in Rancho Palos Verdes

A standard interior or exterior door takes one to two days once the unit is on site. Custom entry doors with new framing and finish work run three to four days. Lead time for the door itself is usually two to eight weeks depending on the manufacturer and finish.
Interior replacement doors usually don’t require a permit. Exterior doors that involve structural reframing, enlarging an opening, or changes to the entry can. We confirm the permit scope during the estimate and pull permits where needed, so inspections pass. Call (888) 345-8164 to ask about your specific door.
Yes, in most cases. Standard replacements fit the existing rough opening, so no plumbing or structural changes are needed. If the opening is out of square or the framing has rot, reframing gets added to the quote before work starts – you’ll never get an unexpected charge after the fact.
Custom carriage-house and oversized entry doors sit at the top of the range, typically well above $4,800 per door depending on size, wood species, hardware, and finish. We give you a line-item written estimate with the door, labor, hardware, and finish broken out.
Every door installation is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it’s in writing. Call (888) 345-8164 for a free estimate.
Get a Free Door Installation Estimate in Rancho Palos Verdes
Call (888) 345-8164 to schedule a free on-site estimate for Door Installation in Rancho Palos Verdes. We’ll measure the opening, confirm the permit scope, and hand you a written, line-item quote with the door, hardware, labor, and timeline in front of you. Our technicians have up to 12 years of experience, and every job is backed by our written guarantee. Need your Windows & Doors work handled alongside it? Mention that on the call and we’ll scope it together.
Written by the team at Groundwork Construction Co.












