







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Rancho Palos Verdes, CA: What the Job Actually Costs
New vanities, tile and fixtures in Rancho Palos Verdes typically run $9,000 – $28,000, with most homes landing in the middle of that range once you account for a real stone top and quality fixtures. A vanity-only swap is the small end; a full three-surface tile job plus freestanding tub and new plumbing trim sits at the top. Realistic timeline for a full package is three to five weeks from demo to final grout. Call (888) 345-8164 and we’ll walk through what your bathroom actually needs before you commit to a number.
How the Vanities, Tile & Fixtures Job Runs, Stage by Stage

This isn’t a project where a crew shows up and tiles over what’s there. The sequence matters, and the order of decisions matters more.
Stage 1: Demo and surface inspection (1 – 2 days)
We strip the old vanity, tile, fixtures and any original substrate down to studs and subfloor in the wet zone. On Rancho Palos Verdes homes this is where the surprises surface – 1960s tar-paper waterproofing that’s failed quietly behind a tile wall, or a subfloor that’s been softening under a leaking vanity for years. You get a same-day walkthrough of what we found and what it changes before anything goes back up.
Stage 2: Rough-in and substrate (2 – 4 days)
Plumbing stub-outs move for the new vanity layout and shower valve, electrical goes in for sconces, a lighted mirror, and GFCI receptacles near the sink. We install cement board or a bonded waterproofing membrane (Schluter Kerdi or a liquid-applied equivalent) across the wet areas and let it cure fully. Your decision here is fixture rough-in positions – where the vanity faucet sits relative to the sink, and where the shower head and controls land on the wall.
Stage 3: Tile layout and install (3 – 6 days)
We set a dry layout first so the field tile, niche and grout lines land symmetrically instead of ending in a sliver at the corner. Floor tile goes down and cures; wall tile follows. On large-format tile (24×48 porcelain is common in Rancho Palos Verdes) we use a leveling clip system to keep lippage flat. You approve the layout before thin-set touches a single piece.
Stage 4: Vanity, top and fixtures (2 – 3 days)
Vanity cabinet sets and levels, the countertop template gets taken if it’s natural stone, and the top fabricator returns in about a week with the finished slab. Faucets, drains, the shower valve trim, and any freestanding tub filler go in after the top, not before. This is where your fixture selections – finish, handle style, flow rate – need to already be on-site and in boxes.
Stage 5: Grout, seal, punch list (1 – 2 days)
Grout, silicone at every change of plane, sealer on natural stone, and a final test of every valve and drain before we walk you through. The full sequence, start to finish, runs three to five weeks for the package, with a two-to-three-week lead time on custom stone tops baked into that. What you control across those stages: fixture finish, tile choice, layout approval, and stone slab selection – roughly four decisions, each roughly a week ahead of the crew.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
The materials drive more of the cost variance than labor does. Here’s what the choice looks like on the ground.
- Vanity cabinet: Stock (big-box 30 – 48 inch, particleboard box) is cheapest but won’t match custom door styles. Semi-custom plywood boxes with dovetail drawers run higher and fit odd alcoves. Custom built-in gives you the exact width, toe-kick and finish but pushes timeline and cost. For a Rancho Palos Verdes home with a specific alcove, semi-custom usually wins on value.
- Countertop: Quartz is the practical default – non-porous, doesn’t stain, holds up to a busy bathroom. Honed marble is beautiful and softer; it etches with toothpaste and citrus over time. A remnant slab is the value play if your vanity is under about 48 inches.
- Floor tile: Porcelain plank (widely available from manufacturers like Atlas) is durable and reads as wood. Natural stone (travertine, slate) looks richer but needs sealing and is slippery when wet unless honed. Large-format porcelain keeps grout lines minimal, which matters in a smaller bath.
- Wall tile and accent: Full-height tile is the strongest waterproofing; wainscot-height tile saves money but leaves painted drywall above the spray zone. A mosaic accent or niche is a nice detail if it doesn’t fight the field tile.
- Fixtures: Brushed nickel and matte black hold up to finish wear better than polished chrome, which shows water spots. A brand like Kohler is a safe reference point for valves and faucets that won’t fail in five years. Freestanding tubs add plumbing and floor reinforcement.
What Vanities, Tile & Fixtures Costs in Rancho Palos Verdes, CA

The range is $9,000 – $28,000, and the low end assumes a vanity-and-top swap with modest tile; the high end assumes full wet-area tile, natural stone, freestanding tub and a relocated plumbing rough-in. Five variables push the number up or down:
- Square footage of tile: a full-height shower wall and floor can triple the tile labor and material versus a wainscot-only job.
- Existing condition: rotted subfloor, failed waterproofing, or a vanity on a slab that’s settled moves the job toward the top end. Older Rancho Palos Verdes homes often hide a plumbing leak that’s been running for years.
- Plumbing and electrical relocation: moving a drain or adding a GFCI circuit costs real money; keeping the existing rough-in keeps the budget down.
- Material grade: quartz versus marble, porcelain versus natural stone, chrome versus brushed finishes each move the number.
- Permit scope: a cosmetic swap may not need one; moving plumbing does. A written estimate lists the permit line separately so you see it.
A written estimate from us breaks labor, materials, permit and the countertop fabrication as line items – upfront pricing, the number you see is the number you pay. What’s not in the line items: structural repair if a wall has to be opened, and any slab or foundation fix the local soil turns up. We flag those before they happen, never after.
See the difference
Before
After
Before
After
Before
AfterWhat Rancho Palos Verdes Homes Do to This Job
Housing stock here is custom and semi-custom single-family, mostly 1950s through 1990s, and it changes the work. The plumbing is often original copper or galvanized pipe; we regularly find a slow vanity leak that rotted the cabinet base and subfloor decades after install. Terraced yards and hillside slabs mean a lowering floor drain or a wall that isn’t plumb by half an inch – which matters when you’re setting a 60-inch vanity or a glass panel. Permits, when plumbing or electrical moves, go through the City of Rancho Palos Verdes with inspection at rough-in before any tile goes back up. Where a property sits on a steep coastal slope – Portuguese Bend is the area contractors know best – brace yourself for geotechnical review and City geologist sign-off before a permit moves, which adds weeks to planning. Salt air and coastal fog don’t affect interior tile much, but they play havoc on exterior finishes if you’re also touching the outside. If you’re planning a broader bathroom project alongside this, that’s a separate page for Bathroom Remodeling in Rancho Palos Verdes, and our Bathroom Remodeling service covers the full scope. We also handle Tile Roofing in Rancho Palos Verdes and Specialty Roofing in Rancho Palos Verdes for homeowners pairing interior work with the exterior. We cover all of Rancho Palos Verdes and the surrounding areas.
Serving Rancho Palos Verdes, CA – Our Local Coverage Area
We serve Rancho Palos Verdes and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in Rancho Palos Verdes

Three to five weeks from demo to final grout for a full package, with custom stone countertops adding about a week of fabrication lead time. Permit review, where required, can add two to four weeks depending on scope. Call (888) 345-8164 for a schedule specific to your job – estimates are free.
It depends on whether plumbing or electrical rough-in moves. A cosmetic swap – same sink location, new tile surface – often doesn’t require one; relocating a drain or adding a circuit does. We pull the permits and pass the inspections so you aren’t chasing the city. Call us for a scope-specific answer before work starts.
Yes, and that’s the most cost-effective route. Keeping the sink rough-in and shower control in place lets you upgrade the vanity cabinet, countertop, tile and fixtures without opening walls. It’s how a lot of our Rancho Palos Verdes work lands in the lower half of the price range. Call for a free estimate to see if your layout allows it.
Vanity installation runs $800 – $3,000 for the cabinet and top, separate from tile and fixtures. Stone tops and custom sizing push toward the top end. Bundling the vanity with tile work usually costs less than doing them in two trips. Call (888) 345-8164 for an exact quote – estimates are free.
Every vanities, tile and fixtures job we do carries the 730-Day Done Right Promise – two full years covering our workmanship, not just the materials. If a tile comes loose or a vanity isn’t sitting right, we come back and make it right. Call for the written warranty terms before you sign anything.
Get a Free Estimate on Your Vanities, Tile & Fixtures
Call (888) 345-8164 and a live person picks up – day or night – to schedule a free on-site estimate in Rancho Palos Verdes. We’ll walk the bathroom, check the substrate and plumbing, and hand you a written line-item quote with materials, labor, permit and countertop fabrication spelled out. No surprises after demo. Free project estimate and design consult included.
Written by the team at Groundwork Construction Co.












