







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in South Gate: What They Cost and How Long They Take
Custom and geometric windows in South Gate typically run $5,500 to $16,000 for a small set of shaped or arched units in a typical 1920s – 1960s tract home, and $14,000 to $26,000 when you’re doing a full façade with several geometric units plus structural framing changes. Most jobs work through design, permit review, a 4 – 8 week fabrication lead time, and 1 – 3 days of install. Call (888) 345-8164 for a free on-site estimate.
How We Run a Custom & Geometric Window Job, Start to Finish

Shaped windows aren’t a same-day swap. The build sequence below is what actually happens on a South Gate job, and it’s the order that keeps you out of failed inspections.
Stage 1: On-site measure and feasibility (day 1, about 90 minutes)
We open the wall, check what’s behind the stucco, and measure the rough opening for each proposed unit. Here is where we find the original framing, any old unpermitted opening, and whether the header can carry a wide arch or a bank of angled windows. You decide: go with the wall you have, or budget for new framing and a header.
Stage 2: Design and product selection (1 – 2 weeks)
Each unit gets built to a template, so you’re choosing shape, radius, grid pattern, glass package, and finish. Andersen and Marvin both offer arched and geometric units in their custom lines; we’ll walk the trade-offs between them at this stage. You sign off on the drawing and the order. Nothing gets built until the dimensions match your wall, not a catalog page.
Stage 3: Permits and inspections (2 – 6 weeks, depending on City of South Gate review)
We submit the drawings, pull the permit, and handle the inspection sequence. South Gate is strict on small-parcel projects, and window projects that change an opening size or add a new opening get reviewed. If any existing work surfaces during inspection, you’ll hear about it from us before the city does.
Stage 4: Fabrication (4 – 8 weeks)
The factory builds to the signed template. This is the longest stretch and the one that catches homeowners off guard, so we give you the lead time in writing at the estimate, not after you’ve paid the deposit.
Stage 5: Demo, framing, install, trim (1 – 3 days, sometimes spread over 2 visits)
Old window out, framing corrected, new unit set, flashed, trimmed, and sealed. We finish with a punch walk so any gap, adhesive, or trim issue gets resolved before we leave the property.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Custom and geometric windows are less about brand than about the four decisions that drive both cost and appearance:
- Frame material: Vinyl is the budget route and works well in a mild climate, but it can’t take tight radii without visible mullions. Wood-clad aluminum (Andersen, Marvin) handles arches and polygons cleanly and holds up for decades; it’s the material most homeowners pick for a front façade.
- Shape and radius: A half-round or elliptical arch is the most common geometric order. A full circle, eyebrow arch, or trapezoid costs more because the glazing and the frame are assembled, not assembled from stock.
- Glass package: Standard dual-pane is the baseline. Low-E and impact-rated glazing add cost but pay back in comfort during South Gate’s hot, dry summers, and impact-rated units are useful if your HOA or a lender requests them.
- Finish and grid: White is the most economical finish. Bronze, black, and custom colors add 10 – 20% to the unit. Divided lites inside the glass cost less than applied grids and never collect dust.
What Custom & Geometric Windows Cost in South Gate, CA

A single geometric unit installed runs roughly $1,400 – $4,500, a set of three to five shaped units $5,500 – $16,000, and a full custom window project with multiple shapes and framing work $14,000 – $26,000. Expect the permit and inspection fees to be a separate line, and expect structural framing or a new header to add $1,500 – $4,000 if the plan calls for it.
Four things move the number:
- Size and count: every additional unit adds cost, and each window above 30 square feet needs its own engineering.
- Existing wall condition: original 1920s – 1960s window openings are never quite square, so re-framing adds time.
- Shape complexity: simple arches are cheaper than compound curves or trapezoids.
- Material grade and finish: vinyl at one end, wood-clad aluminum at the other, plus custom color.
A written estimate from us lists every line item – units, labor, trim, permit fees, disposal. It also states what isn’t included: painting, drywall repair beyond the opening, and any structural work found behind the wall once it’s open. No-hassle upfront pricing means the number you see is the number you pay, and projects over $10,000 qualify for $1,000 off plus 0% financing for 18 months.
See the difference
Before
After
Before
After
Before
AfterWhat South Gate Homes Specifically Do to This Job
Most of South Gate is small-lot single-family housing built between the 1920s and the 1960s, and that era’s openings are rarely straight. When we cut into a wall in the older blocks near Hollydale or along the Firestone Boulevard corridor, we frequently find a prior window swap done without a permit, or a wall opened and closed with stucco that’s never been re-flashed. Because the city is tight on small parcels and reviews anything that changes an opening, the first thing we do is confirm what’s actually built, not what the assessor’s record shows. Add in South Gate’s expansive clay soils, which shift seasonally and put stress on door and window frames, and the frame you install needs to be set so it doesn’t bind through two or three years of settling. That’s the reason we don’t sell a stock window as a geometric replacement here.
Serving South Gate, CA – Our Local Coverage Area
We serve South Gate and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Custom & Geometric Windows in South Gate

Plan on 8 to 14 weeks from signed estimate to final inspection. Design takes 1 – 2 weeks, the City of South Gate permit review 2 – 6 weeks, fabrication 4 – 8 weeks, and installation 1 – 3 days on site. Call (888) 345-8164 if you want a written timeline for your opening.
Yes, in most cases. A shaped or new-opening window that changes the size or location of an opening requires a permit and an inspection, and the City of South Gate is strict on these for small-lot homes. We handle the drawings and the permit process, and any unpermitted past work that shows up becomes a documented item on the estimate.
Sometimes. If the shape fits inside the existing rough opening, we can often install without a new header. If the arch is wider or taller than the opening, the wall needs re-framing, and that adds $1,500 – $4,000 plus a structural review. We tell you which category your opening is in after the day-one measure.
One unit is $1,400 – $4,500, a small set is $5,500 – $16,000, and a full façade with framing work is $14,000 – $26,000. Glass, finish, and framing condition move the number the most. Call (888) 345-8164 for an exact figure – estimates are free.
Every custom and geometric window project is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. Manufacturer warranties on the units are separate, and we hand over the paperwork at the final walk so you have it in writing. Our technicians have up to 12 years of experience on window and framing work.
Get a Free Estimate on Custom & Geometric Windows in South Gate
We’ll come out, measure your openings, and put a written line-item estimate in your hands so you can see exactly where the money goes. We cover South Gate as part of our South Gate service area, and the estimate is free. Call (888) 345-8164 and a live person picks up; we’ll book a time that works. If the scope grows, this pairs naturally with Concrete Driveways & Concrete Work in South Gate and Asphalt Driveways & Resurfacing in South Gate, and it’s often part of a full Windows & Doors in South Gate project. Our Windows & Doors service covers the wider scope if you want to talk through all of it.
Written by the team at Groundwork Construction Co.












