







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Gardena, CA: What It Costs and How Long It Takes
A new chain link fence in Gardena, CA typically runs $3,500 to $9,000 for a standard residential lot, and most jobs are finished in one to three days once the permit clears. The price covers posts set in concrete, top rail, tension wire, fabric, gates, and haul-away of the old fence. Call (888) 345-8164 for a free on-site estimate with a written line-item quote.
Key Takeaways
- Most Gardena chain link fence jobs land between $3,500 and $9,000.
- Galvanized is the standard; vinyl-coated costs more but handles salt air and marine-layer moisture better.
- Posts are set in concrete 24 to 48 hours before fabric goes up, so a two-day job is normal.
- We pull the permit and walk the inspection so you’re not chasing the city.
- Every fence is covered by our 730-Day Done Right Promise.
How We Build a Chain Link Fence in Gardena, Stage by Stage

Most contractors gloss over the sequence. Here’s the actual real-world order of work, including where you make decisions and where the clock stops.
Stage 1: On-site measure and layout (about 60 to 90 minutes). We walk the property line with you, confirm where the fence runs, and check for sprinkler lines, gas meters, and the shared property line with your neighbor. This is the point where you decide gate locations and swing direction. On tight Gardena lots, gate placement often matters more than fence height because a gate that swings wrong blocks the driveway apron.
Stage 2: Utilities check and permit (3 to 10 business days). Before anything gets dug, we call 811 to mark underground utilities. On older Gardena properties with original slab foundations and older galvanized plumbing, this step protects you from a costly surprise. If your fence line crosses an easement, we flag it here. Pulling the permit and waiting for plan check is the longest part of the schedule, and it’s why we start it early.
Stage 3: Demo and post setting (day 1 of construction). If there’s an old fence, it comes out and gets hauled off. We auger post holes to depth, set terminal posts, line posts, and corner posts in concrete, and check plumb and string-line straight. The concrete needs to cure before tension is applied, so this is where the job pauses for 24 to 48 hours. You’ll notice the posts standing alone overnight; that’s correct, not a delay.
Stage 4: Rails, fabric, and gates (day 2 of construction). Top rail and tension wire go on, then the chain link fabric gets stretched and tied. Gates are hung, latched, and adjusted so they close smoothly. A chain link fence only feels solid when the fabric is properly stretched; a loose job rattles in the wind for years, so we tension it before we call it done.
Stage 5: Walkthrough and inspection (same day or next). We walk the fence with you, then meet the inspector. On a typical Gardena residential lot, the whole job (permit wait excluded) takes one to three working days.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Fence Options You’ll Choose Between
Chain link is not one product. Here’s what actually changes when you pick, and the honest trade-off on each.
- Galvanized steel vs. vinyl-coated. Galvanized is the standard choice and the cheaper one, roughly $3,500 to $6,000 on a typical Gardena lot. Vinyl-coated (green or black) costs more, usually $5,000 to $9,000, but it holds up better against the marine-layer moisture and salt air that comes with South Bay living, and it looks less industrial.
- Height. 4-foot is the budget line, 5-foot is the residential workhorse, and 6-foot is the tall option. Height adds material and can affect HOA rules, so we flag the max before you commit.
- Mesh gauge and size. 11.5-gauge is the standard residential mesh; a heavier gauge resists dogs and impact better. Standard 2-inch diamond mesh is the norm; a smaller mesh is a specialty order and costs more.
- Post type. Terminal and corner posts take more concrete and heavier gauge than line posts, so more corners or gates means a higher total.
- Gates. A single walk gate is the budget option; a double drive gate with a heavier frame and drop rod adds a fixed cost. If you want a privacy screen retrofit over the chain link, plan to revisit the post schedule because it adds load.
What a Chain Link Fence Costs in Gardena, CA

The lead range for a residential job here is $3,500 to $9,000. Here are the variables that push a job to the low or high end:
- Linear footage. The single biggest driver. A small lot fence runs toward $3,500; a full-perimeter job with multiple corners pushes toward $9,000.
- Existing fence removal. Demo and haul-away adds cost. A concrete-footed old fence is heavier work than a rusted-out one.
- Material grade. Vinyl-coated fabric and heavier posts move the number up; galvanized standard chain link keeps it down.
- Gates. Each additional gate is its own line item, and a double drive gate with a heavy frame costs more than a walk gate.
- Site conditions. The sandy, often expansive soils in parts of Gardena can call for deeper footings or concrete in problem spots, and a fence line over an older easement can require a re-route.
A written estimate should spell out linear footage, post spacing, gate count, fabric type, concrete quantity, permit fee, and haul-away. What it typically does not include: landscaping removal beyond the fence line, retaining wall work where grade changes (which is a separate job), and any gate automation.
See the difference
Before
After
Before
After
Before
AfterWhat Gardena Homes Do to a Chain Link Fence Job
Gardena is overwhelmingly post-WWII 1950s – 60s single-story stucco tract homes on small lots, and that shapes this work. On a tight parcel, the property line runs close to the neighbor’s wall or the alley, so post placement gets cramped and we measure carefully. Older homes on the 90247 and 90249 blocks often have original slab foundations and galvanized plumbing, which is why we never dig before the 811 mark. Along the 90248 corridor, the 1960s – 80s concrete tilt-up and masonry industrial buildings share fences with residential lots, and those lines get hit by commercial traffic, so we use heavier posts and gates there.
Climate matters too. The marine-layer summers and small rain totals mean good drying weather, but the dry Santa Ana wind events bring red-flag restrictions on exterior work. Fence work is low-risk, but we schedule around red-flag days because it’s the right call. One unusual local factor: unlike many cities, Gardena’s own building department runs a strict plan-check process, and the city’s long-standing Japanese-American community and dense commercial mix mean fence lines near easements get extra scrutiny. We pull the permit, meet the inspector, and handle the paperwork so you don’t have to. The fence here is one piece of your property’s exterior, and many homeowners pair it with a full Fence Installation in Gardena project, or with Concrete Driveways & Concrete Work in Gardena to fix the apron at the gate.
Serving Gardena, CA – Our Local Coverage Area
We serve Gardena and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Chain Link Fence in Gardena

Construction takes one to three working days, but plan on three to ten business days before that for the permit and utility check. The largest schedule variable is the city’s plan-check timeline, which is why we start the paperwork the day you approve the estimate. Call (888) 345-8164 for a realistic start date.
Yes, in most cases a residential fence permit is required, and a fence over the standard height or over an easement gets more scrutiny. Requirements vary by height, corner visibility, and whether the fence sits over an easement. We confirm the rule for your lot before we order material. Call (888) 345-8164 and we’ll explain what applies to your property.
Most residential jobs run $3,500 to $9,000. The low end applies to a shorter galvanized fence with one gate; the high end comes from larger footage, vinyl-coated fabric, multiple gates, and removal of an old fence. Call (888) 345-8164 for an exact quote: estimates are free and written line by line.
No, our pricing is upfront: the number on the written quote is the number you pay. The only change would be something no one could see until the ground opens, like an unmarked utility or a buried easement, and we stop and talk to you before doing anything that adds cost. Our Fence Installation team follows the same rule for every job.
Our 730-Day Done Right Promise covers the workmanship for two full years: if something we built isn’t right, we make it right. Manufacturer warranties cover the galvanized and vinyl coatings on the material. Call (888) 345-8164 with any warranty question, and a live person will answer.
Schedule a Free Chain Link Fence Estimate in Gardena
Call (888) 345-8164 to book a free on-site estimate for a chain link fence in Gardena. A live person answers around the clock, so you’ll never hit voicemail. We’ll measure the line, check for easements and utilities, and hand you a written quote with the permit and material costs spelled out. Our technicians have up to 12 years of experience, are background-checked and arrive in uniform. If you’re planning a larger project, many homeowners pair this with Asphalt Driveways & Resurfacing in Gardena.
Written by the team at Groundwork Construction Co.












