







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vinyl Fence in Lynwood, CA: What It Actually Costs and How Long It Takes
A vinyl fence in Lynwood, CA typically runs $3,500 to $9,000 for a standard residential run, and most jobs are finished in one to two days once materials are on site. That price covers vinyl panels, posts set in concrete, caps, and cleanup. The number moves with linear footage, gate count, height, and how much old fence has to come out first. Call (888) 345-8164 for a free on-site estimate with a written line-item quote.
How our vinyl fence process works in Lynwood, from first call to final walk

Fence work is simple until it isn’t. The variables that wreck a budget are almost always underground or on the property line, so our sequence front-loads the reconnaissance and back-loads the concrete. Here’s what the job actually looks like.
Stage 1: On-site estimate and line survey (day of estimate, about 45 minutes)
We walk the property line with you, measure total run in linear feet, and mark every corner, gate, and transition. At this stage you decide height (4 ft, 5 ft, or 6 ft), style (privacy, picket, or ranch rail), and color. This is also when we identify whether a utility locate is needed before we dig.
Stage 2: Utility mark-out and permit filing (3 to 10 business days)
Before anyone puts a shovel in the ground on a fence over 6 feet or near a property line, we call for a utility mark-out so we don’t strike irrigation, gas, or electrical lines. If your fence needs a permit in Lynwood, we pull it and schedule the inspection. You don’t chase paperwork.
Stage 3: Removal of the old fence (2 to 4 hours)
Old wood, chain link, or failing vinyl comes out, and we haul it. Posts set in concrete get pulled with a truck-mounted puller or dug out by hand if they’re crowded against a block wall. You decide here whether to reuse existing post holes or drill fresh ones. Fresh is almost always the better call.
Stage 4: Post setting and panel installation (1 to 2 days)
We set posts in concrete, check plumb and line at every post, then install panels, rails, and caps. Gates get hung with hardware rated for the gate weight. On a typical Lynwood lot this stage runs a full day for 100 to 150 linear feet. Concrete needs to cure before we load the panels on heavy gates, so a two-day turnaround is standard.
Stage 5: Final walk and cleanup (about 30 minutes)
We walk the fence with you, check every gate swing, confirm the line is straight, and sweep the site. Any adjustments happen before we leave. Your 730-Day Done Right Promise kicks in from the day we finish.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The vinyl fence options you’ll choose between in Lynwood
Vinyl isn’t one product. What you pick changes the price by 30 to 40 percent and changes how the fence behaves after five summers of Lynwood heat. Here are the real choices:
- Privacy vinyl (6 ft, solid panels): the most common pick for backyard side and rear lines. Highest material cost but the most wind and sight block. Expect a mid-to-high range on the estimate.
- Picket or semi-private (4 to 5 ft): cheaper per linear foot, better airflow, common on front yards where neighbors keep the setback. Lower end of the price range.
- Ranch rail (3-rail or 4-rail): the cheapest vinyl configuration. Suits larger lots or decorative boundary lines where full privacy isn’t the goal.
- Color and finish: white, tan, gray, and woodgrain-look vinyl are all standard now. Woodgrain costs more, but it holds up better against sun fade than a plain white panel over 10-plus years.
- Post reinforcement: steel-insert posts cost more upfront but stop the sag that plagues cheap hollow-post installs after 6 or 7 years. Worth the upgrade on any gate post.
- Gate style: walk gates and drive gates both add cost. A double drive gate is the single biggest line-item jump on most jobs.
We install vinyl rated for UV exposure and wind load. On products where it matters, we pull from brands like Atlas and Boral for structural components. The right call comes down to how you use the yard, not what looks best in a catalog.
What Vinyl Fence costs in Lynwood, CA – and what moves the number

The honest range for vinyl fence installation in Lynwood is $3,500 to $9,000 for a typical residential job. Here’s what pushes a project toward the low end versus the high end:
- Linear footage: the biggest lever. 80 feet sits at the low end; 200-plus feet sits at the top.
- Old fence removal: demolition and haul-away adds cost. Concrete-set posts take longer than post-and-rail. We include this in the written estimate so nothing surprises you.
- Height and style: a 6 ft privacy run costs more than a 4 ft picket run of the same footage, mostly in material volume.
- Gate count and gate size: every gate adds hardware, bracing, and reinforcement. A wide drive gate adds more.
- Site access and terrain: a tight side yard or a slope changes how quickly posts can be set and how concrete gets placed.
- Permit scope: if a permit is required for your fence height or location, the permit and inspection add time and a modest fee.
Our written estimates are line-item. Materials, labor, concrete, removal, permits, and gates are each listed. What’s typically excluded: utility relocation, retaining walls, and any landscaping repair beyond fence line. Call (888) 345-8164 and we’ll walk your property and give you an exact number.
See the difference
Before
After
Before
After
Before
AfterWhat Lynwood homes specifically do to a vinyl fence job
Lynwood is a densely built city of small-lot tract homes from the 1920s through the 1960s, and that history lands directly on fence work. Most of the 90262 ZIP sits in 5,000 to 6,000 sq ft lots with detached garages that run to the alley, especially along the north-south streets off Long Beach Blvd. Those alley-facing walls are where fences get abused: torn down, patched, and rebuilt without a permit over the years. When we show up, we sometimes find a fence line that doesn’t match the recorded property line, or a gate that opens onto a converted garage room nobody pulled a permit for. That’s part of the reality in Lynwood, and we sort it out before we set a post. The city’s mild, wet winters and hot, dry summers are also hard on fences. Winter rain softens the soil and works loose any post that was set shallow. Summer heat bleaches cheap vinyl faster than most homeowners expect. We set posts deep, use UV-stable panels, and build to a spec that survives both cycles. If you’re also fixing up the driveway side, homeowners often pair this with Asphalt Driveways & Resurfacing in Lynwood or Driveway Repair & Replacement in Lynwood, since the fence and driveway often come up in the same conversation about curb appeal. If you want the wider project mapped out, our Fence Installation in Lynwood page covers the full scope, and the Fence Installation hub covers what we do across all fence materials. We work in Lynwood and the surrounding area, so see our Lynwood service page for how to reach us.
Serving Lynwood, CA – Our Local Coverage Area
We serve Lynwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Vinyl Fence in Lynwood

Most vinyl fence jobs in Lynwood take one to two days on site, plus up to two weeks for permit and utility mark-out if those are needed. A straightforward 100 to 150 linear foot privacy run with one or two gates is a two-day job. A small front-yard picket section can be a single day. Call (888) 345-8164 for a timeline based on your actual linear footage.
Fence permit requirements in Lynwood depend on height, location, and whether it sits on a property line. Fences over 6 feet and fences on corner lots often trigger a permit and an inspection. We handle the permit filing and inspection schedule for you – call (888) 345-8164 and we’ll tell you what your specific fence will need.
Yes. Standard vinyl fence installation only requires holes at the post points, so we don’t tear up driveways or landscaping. We set posts in concrete and clean up after. If a post location sits in an existing concrete pad or paver surface, that requires a different approach, and we’ll flag it on the estimate.
No. Our written estimate is fixed-pricing – the number you see is the number you pay, with no change orders. The only things that can shift the price are conditions we couldn’t see on the walkthrough, and we flag those up front. Call (888) 345-8164 for a no-hassle upfront quote.
Every vinyl fence we install is backed by our 730-Day Done Right Promise – if it isn’t done right, we make it right. That covers the installation and post setting for two full years. Most vinyl panel manufacturers also offer a product warranty on the panels themselves, and we’ll give you the paperwork at final walkthrough.
Schedule a free vinyl fence estimate in Lynwood
We’ll walk your property, measure the run, check the line, and give you a written line-item estimate with a fixed price. No surprise numbers, no pressure. Most estimates take under an hour. Whether you’re replacing a failing fence or starting fresh on a side yard, we’ll tell you exactly what your Lynwood vinyl fence will cost and how long it will take. Call (888) 345-8164 to book your free estimate – a live person answers any time.
Written by the team at Groundwork Construction Co.












