







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Driveway Repair & Replacement in Lynwood, CA: What It Actually Takes
Driveway repair and replacement in Lynwood runs $5,000 – $14,000 for a full tear-out and repour, and a targeted repair on a cracked apron or settled panel usually lands far below that. Most full replacements take 2 – 4 working days from demo to the day you can park on it. Call (888) 345-8164 and we’ll walk your driveway and give you a written, line-item number before anything gets broken up.
Here’s what matters before you spend a dime: Lynwood’s driveways are mostly original concrete poured alongside the houses, and the question is almost never “can this be patched?” but “is patching throwing money at a slab that’s already done?” We look at the base, the drainage, and the joint pattern first, because those three things decide whether a repair holds or fails again by next winter.
How Driveway Repair & Replacement Works, Stage by Stage

We don’t guess at the sequence. Here’s the real order of operations, with how long each stage takes and what you decide at each one.
1. Assessment and layout (day 1, first hour)
We show up, walk the slab, and check for the failure modes that matter: hairline cracks that have spread into structural breaks, panels that have settled or heaved, spalling where the surface is flaking off, and ponding where water sits instead of running to the street. On older Lynwood properties we also check whether tree roots from the parkway strip have lifted a panel. You decide nothing yet; this is diagnosis.
2. Demo and removal (day 1, 3 – 5 hours)
If it’s a replacement, we break out the old concrete and haul it off. This is the stage where surprises surface: we’ve pulled up slabs sitting on six inches of dirt with no compacted base, and slabs poured over old brick or debris from a prior build. That matters because the base is what your new driveway sits on for the next 30 years.
3. Base prep and grading (day 2, half to full day)
We grade for a slope that sheds water away from the house and toward the street, then compact 4 – 6 inches of aggregate base in lifts. This is the unglamorous stage that decides whether your new driveway cracks in three years or holds for decades. You decide the finish here: standard broom, exposed aggregate, or a colored option.
4. Pour or place (day 2 or 3, 2 – 4 hours)
Concrete is poured, screeded, and floated, then cut with control joints while it’s still green. If you’ve chosen a paver surface, this is where the base gets locked and the field is laid. You’ll make your final color and finish call the day before, because the material has to be ordered.
5. Cure and cure-protect (days 3 – 6)
Concrete needs to cure before you drive on it. Foot traffic is usually fine within 24 hours; a car is a 3 – 7 day wait depending on the mix and the weather. Lynwood’s hot, dry summers can pull moisture out of a fresh pour too fast, so we cover and mist as needed. We come back to fill the joint sealant and do a walkthrough.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
This isn’t a menu of ten driveway types. It’s three real decisions that shape how the job looks, costs, and ages.
- Concrete, standard 4-inch pour: the most common call in Lynwood, and the most economical. $4,500 – $12,000 for a typical driveway. The honest trade-off: plain concrete cracks. Control joints manage it, but they’re cosmetic. It suits a tighter budget and a standard-width single-car apron.
- Concrete, reinforced and thicker (5 – 6 inch, rebar or mesh): costs more upfront but is the right call where you’re running heavier vehicles, a truck, or an RV. On lots where the original slab failed prematurely, this is what prevents a repeat.
- Exposed aggregate or decorative concrete: adds texture and slip resistance and hides the small cracks that bother plain broom finish. Sits at the higher end of the concrete range and needs re-sealing.
- Paver surface over a compacted base: $7,000 – $18,000 for a paver driveway installation. Pavers let you lift and reset a single failed section without tearing out the whole thing. More labor upfront, lower repair bills later. Bargain if you plan to stay long.
- Asphalt paving: $3,500 – $9,000, the lowest entry cost, and it’s a fast install. It needs re-sealing every 2 – 3 years and softens in summer heat, so a wide asphalt apron in full sun will show tire marks. It’s the right material when budget is the deciding factor.
For the finish detail, we use Atlas and Tamko underlayment and patching products where a resurfacing or seal coat applies, and can match your existing neighborhood look rather than introducing a surface that stands out on the block.
What Driveway Repair & Replacement Costs in Lynwood, CA

Full replacement runs $5,000 – $14,000 in Lynwood. That range covers demo of the old slab, base prep, and a new concrete pour. Resurfacing a sound but weathered driveway is far cheaper, and a targeted repair of a single cracked or settled panel is cheaper still. Here’s the line-item picture.
| Scope | Typical Range |
|---|---|
| Targeted panel repair | Low hundreds to ~$1,500 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Full driveway replacement | $5,000 – $14,000 |
| Paver driveway installation | $7,000 – $18,000 |
| Driveway sealing | $250 – $700 |
What pushes the job to the high end: the surface area (a double-width driveway is roughly double the material), whether the existing slab is sitting on an adequate base or needs full re-grading, whether a retaining edge or drainage channel is required, the chosen finish (decorative work adds labor), and the haul-away cost for a large, thick old slab. A driveway that also serves as the access for an ADU this is often paired with, like an ADU Site Prep & Utilities in Lynwood project, gets priced as a combined scope.
What’s included in our written estimate: demo, haul-off, base prep, material, control joints, and a walkthrough. What usually isn’t: relocating a gas line, a water main, or a utility stub, and landscape repair at the perimeter. We flag those upfront so the number you see is the number you pay, backed by our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Lynwood Homes Specifically Do to This Job
Lynwood is a densely built, predominantly working-class Latino city, and most of what we pour here is replacement work on aging small-lot tract housing from the 1920s through the 1960s. That build era is the whole story for driveway work. Those original driveways were often poured shallow over native soil with little or no compacted base, so a slab that’s 50 years old has usually already done its time and is failing at the joints, not just on the surface.
The 90262 lots also sit close together, and the detached garages out back – especially along the north-south streets off Long Beach Blvd – mean driveways here often run the full depth of the lot to reach a rear garage. That long, narrow pour is where you see the most settlement and cracking, especially where a mature parkway tree has pushed roots under the apron. Because many of these properties carry a history of unpermitted additions and converted garages, we check what’s actually under the slab before we quote, and we pull the required permits rather than pour over a mystery.
The LA Basin climate works for and against you. Construction runs year-round, which is good. But wet winters expose any slab already at the end of its life – water gets into the cracks, freezes at night, and widens them. Hot, dry summers are the other risk: a fresh pour that dries too fast is a slab that cracks before its first birthday, so we cure-protect through the heat. We cover Lynwood and the surrounding area regularly, so this is familiar ground.
Serving Lynwood, CA – Our Local Coverage Area
We serve Lynwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Driveway Repair & Replacement in Lynwood

A full driveway replacement typically takes 2 – 4 working days on site, plus a cure period of roughly 3 – 7 days before you drive on it. The schedule depends on the size and the finish; decorative concrete adds a day. Call (888) 345-8164 for a timeline matched to your driveway.
Replacement usually requires a permit, especially where the driveway meets the public right-of-way at the apron. We pull the required permits and handle the inspection so the work is on record and passes cleanly. Exact requirements depend on the scope, which we confirm during the estimate.
Yes, if the surrounding slab is sound. We repair single cracked or settled panels and match the finish. If the base under the whole driveway is failing, a partial repair just moves the problem a few feet down the slab, so we’ll tell you that honestly.
Full replacement runs $5,000 – $14,000, a targeted panel repair is far less, and resurfacing falls between. The variables are size, base condition, finish, and drainage needs. Call (888) 345-8164 for an exact written quote – estimates are free.
No. Our pricing is upfront and fixed – the number on the written estimate is what you pay. The only exceptions are things we can’t see until we demo, like an unrecorded utility line, and we stop and re-quote before touching it. All work carries the 730-Day Done Right Promise.
Get a Free Driveway Estimate in Lynwood
If your driveway is cracking, settling, or simply past its years, call Groundwork Construction Co. at (888) 345-8164 for a free on-site estimate in Lynwood. We’ll walk the slab, explain what’s failing and why, and hand you a written line-item quote – no pressure, no surprises. It’s all part of our full-scope Driveway & Pavers work, and part of a bigger plan if you’re pairing it with a project like a Junior ADU & Interior Conversion in Lynwood or a broader Driveway & Pavers in Lynwood upgrade. Call us and let’s get it priced.
Written by the team at Groundwork Construction Co.












