







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Specialty Roofing in Compton: what it covers and what it costs
Specialty roofing in Compton means the work that falls outside a standard asphalt shingle tear-off: flat and low-slope sections over additions and detached garages, cool-roof coatings that meet California’s energy rules, custom flashing where a patio cover ties into the house, and repairs to the mix of roof types found across the 90220, 90222 and 90224 ZIP codes. Most jobs run one to three days on site, and pricing lands between $400 and $1,800 for targeted repairs and roughly $8,000 to $20,000 when a specialty assembly covers most of the roof. Call (888) 345-8164 and we’ll put a real number in writing after we’ve been up there.
How the work actually runs, stage by stage

Specialty roofing is a sequence, not a single visit. Here’s what happens and when, so you know what to expect on your property.
Day 1 morning: inspection and scope
We start on the roof, not in the driveway. Expect 45 to 90 minutes of walking the surface, checking decking and sheathing from underneath where there’s attic access, and looking hard at the transition points: where flat sections meet pitched ones, where a carport or addition was tied in, where the older vents and penetrations sit. You get a written scope with photos before anyone touches a shingle.
Day 1 afternoon: materials and decisions
This is where you make your choices. We bring samples of the systems that fit your roof, talk through the warranty each carries, and confirm color and finish. For most homes in Compton that’s a decision you make the same day, and we order materials so they land before the crew does.
Stage 2: tear-off and prep
Depending on square footage, tear-off of the old layers takes half a day to a full day. We protect the yard, pull the old fasteners, and inspect the decking once it’s exposed. If we find rot in the sheathing, you hear about it that afternoon, not at the end of the job, and the added cost is quoted before we keep going. That’s part of why our estimates hold: the surprises get caught while they’re still small.
Stage 3: installation
Specialty systems take longer than standard shingles. Flat and low-slope assemblies, cool-roof coatings, and custom flashing details each need their own cure or seam time, so a single-section job might be done in a day while a roof with multiple roof types and additions runs two to three days. We keep the site clean each evening and don’t leave open roof overnight unless the weather forces a tarp.
Stage 4: inspection and walkthrough
We schedule the inspection, confirm the permit is signed off, and walk the finished roof with you. You’ll get the manufacturer documentation and our own 730-Day Done Right Promise in writing. If anything on that walkthrough isn’t right, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Compton homes carry a real mix of roof types, and the spec you pick depends on what your roof is doing. Here’s the honest version of each option:
- Single-ply and modified-bitumen flat systems: The go-to for additions, garages and low-slope sections. Durable under intense sun, but you’re looking at a mid-range material cost and the seams matter, so installation quality counts.
- Cool-roof coatings and reflective shingles: These meet California’s cool-roof requirements and help with summer heat. Cheaper than a full replacement, though coatings need recoating every several years, so ask about long-term upkeep.
- Standing seam and architectural profiles: Premium systems for whole-roof projects, with strong longevity and clean lines. They cost more up front and some profiles are best matched to the home’s style.
- Custom flashing and transition work: Not a material choice exactly, but the detail that most determines whether a specialty roof holds. Especially important where homes have had additions tied into the original roof.
We carry top-tier material brands in every category, so you’re picking based on fit and budget, not just what’s on hand. If the roof work turns into part of a broader project, the team handling Roofing in Compton takes the wider scope from there.
What Specialty Roofing costs in Compton, CA

Most Compton specialty roofing work falls in these ranges, with targeted repairs starting around $400 and full specialty assembly work running to $20,000 depending on size and system.
- Targeted specialty repairs: $400 – $1,800
- Full specialty roof assembly (most homes): $8,000 – $20,000
- Metal specialty systems: $15,000 – $40,000
- Tile-area specialty repair: $600 – $2,500
Five things push a job toward the high end: total square footage of the specialty section, the condition of the decking under the old roof, how many transition points and penetrations there are to flash, the material grade you choose, and how deep the permit scope runs. What’s included in a written estimate: materials, tear-off, decking inspection, installation, cleanup and disposal, plus the permit and inspection. What usually isn’t included unless we call it out: structural repairs if the sheathing or framing is damaged, and unrelated roof sections we didn’t scope. You get upfront pricing, and the number you see is the number you pay, plus 0% financing for 18 months and $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterWhat Compton homes do to this job
Most of the homes we work on in Compton are 1940s – 1960s single-story stucco builds on small lots in the 90220, 90222 and 90223 ZIP codes, and that shapes specialty roofing here in ways it doesn’t to the north. Original roofs on these houses have often been patched or layered over the years, so the decking underneath can be more worn than the surface suggests. Those post-war builds also sit on tight R-1 lots with narrow side-yard setbacks, which means staging materials, setting a dumpster, and getting the crew access can take more planning than the roof itself. The warm, dry, near-coastal climate here means minimal freeze risk, but the intense summer sun and the seasonal Santa Ana winds are hard on flashing, fasteners and any sealant that’s been baked flat. We see a lot of the same failures: failing flashing at additions and patio-cover ties, worn-out sealant at penetrations, and low-slope sections that were never built to handle pooling water. Cool-roof requirements come into play here too, and we factor them into the spec rather than around them.
Serving Compton, CA – Our Local Coverage Area
We serve Compton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Specialty Roofing in Compton

Most specialty jobs take one to three days on site, with the exact time set by square footage and how many roof types are involved. Larger or multi-system roofs can stretch a bit longer, and we give you the working-days estimate in writing before we start.
Yes, most specialty roofing work here requires a permit, and cool-roof assemblies typically need to meet California’s energy requirements. We pull the permit and schedule the inspection, so you’re not chasing paperwork.
Usually, yes. Specialty roofing is a surface and decking job, so it rarely touches plumbing or framing unless the inspection finds damage. If something structural turns up, we stop and quote it before continuing.
Targeted repairs typically run $400 to $1,800, and full specialty assemblies usually land between $8,000 and $20,000. Exact pricing depends on size, decking condition, transition details and material grade; call (888) 345-8164 for a free written estimate.
Every job is backed by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction, along with the manufacturer’s warranty on the materials. If it isn’t right, we come back and make it right.
Get a written estimate for specialty roofing in Compton
Call (888) 345-8164 for a free on-site estimate for specialty roofing in Compton. A live person answers around the clock, and the visit includes an up-close inspection, a written line-item scope with photos, and a firm price backed by 0% financing for 18 months and $1,000 off projects over $10,000. We cover Compton and the surrounding area, and homeowners often pair roof work with Energy-Efficient Windows in Compton or Sliding & Patio Doors in Compton. For the broader service, see our Roofing page.
Written by the team at Groundwork Construction Co.












