







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Long Beach, CA: What the Job Actually Involves
Custom and geometric windows in Long Beach typically run $8,000 – $25,000 installed, with most single-facade projects landing in the $12,000 – $18,000 band, and a typical job takes four to seven weeks from final measurement to the last sealed unit. The work means arched, angled, trapezoidal, round, and eyebrow shapes templated to your actual opening, not a stock rectangle cut to fit. It’s slower and fussier than a standard replacement, and on old Long Beach stock it also means dealing with whoever framed that opening decades ago. Call (888) 345-8164 and we’ll walk your facade before you commit to anything.
The Shape You Want Has to Be Built Before It’s Installed

Geometric windows aren’t a single visit. The sequence is fixed, and each stage has a decision that belongs to you, not to us.
Stage 1: Template and survey (day 1)
We measure the actual opening, not the drawing. On a Rose Park bungalow or a 1950s stucco fourplex, an arched header is rarely plumb and the rough opening is almost never the size the last remodel claimed. We build a physical template of the shape, photograph the surrounding framing, and check whether the header can carry a heavier unit. You decide the material and the glass package at this meeting because both drive the lead time.
Stage 2: Shop drawings and approval (days 2 – 10)
The manufacturer turns our template into shop drawings: radius, jamb depth, mullion layout, glass spec, and finish. You sign off on those drawings, and this is the step that protects you. If the radius is wrong on paper, it’s wrong in glass, and nobody eats that cost quietly. Lead time on true custom shapes runs three to five weeks; stock rectangles inside the same opening take days.
Stage 3: Opening prep and reframing (days 1 – 2 on site)
Out comes the old unit and any rot behind it. Salt air off the Port of Long Beach chews through exterior trim and fasteners faster than most homeowners expect, so we plan for replacing compromised framing and flashing, not just the window. If the opening needs a new header or a squared-up rough opening, that happens here, before anything arrives.
Stage 4: Setting, shimming, and sealing (days 2 – 3)
Units get set, shimmed, squared, and sealed with the flashing detail done properly: sill pan, backer rod, sealant in the right order. A geometric unit is heavier and less forgiving than a slider, and a bad seal on a coastal facade shows up as a stained ceiling by the first winter rain.
Stage 5: Finish and inspection (days 3 – 5)
Interior trim, exterior stucco patching at Belmont Heights and east-side homes, and paint touch-up. If the project touches the building envelope or falls under a historic or coastal review, we schedule the inspection and don’t call the job done until it passes. Most full jobs close out in about a week of on-site labor after the units land.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
What You’re Actually Choosing Between
The shape gets the attention. The material and glass package decide how it holds up on a Long Beach facade.
- Wood-clad (pine or fir core, aluminum exterior): the classic choice for Craftsman and Spanish Colonial Revival homes. Holds paint well, takes a true radius cleanly, and costs more. The trade-off is annual attention to the exterior finish on a salt-air property.
- Vinyl: the budget-friendly route and genuinely low maintenance. It handles simple arches and eyebrows but can’t form a tight small radius or a sharp trapezoid without looking chunky. Fine for a rear elevation, less so on a street-facing Gothic arch.
- Fiberglass: strong, stable, and holds a finish better than vinyl. Suits angled and trapezoidal shapes well. Pricier than vinyl, less warm-looking than wood.
- Aluminum (including thermally broken systems): the pick for large spans and modern geometric walls where you want slim sightlines. Great for a two-story angled window wall. It conducts heat, so the glass spec has to do more work.
- Glass package: in Long Beach you’re balancing marine-layer condensation, salt film, and afternoon sun. Low-E with argon handles most of it. Tempered glass is required where a unit is large, low, or near a door.
- Finish and interior trim: factory finish versus field paint, and trim profiles that either match the original 1920s millwork or deliberately break from it. This is where a geometric window either looks original to the house or looks added on.
We work with Andersen and Marvin on the custom side, and PGT where a shape needs a specific impact or performance rating. You pick the trade-off; we’ll tell you which one survives a coastal facade.
What Custom & Geometric Windows Cost in Long Beach, CA

Plan on $8,000 – $25,000 for a custom and geometric window project in Long Beach. A single arched feature window on a bungalow sits near the low end; a full facade of angled and radiused units on a two-story home pushes toward the top. Every quote we write is line-item, and the number you see is the number you pay.
Five things move that number:
- Shape complexity: a stock eyebrow arch is cheap to form. A true half-round, a segmented arch, or a non-standard trapezoid requires custom tooling and drives the per-unit cost up sharply.
- Unit count and size: one feature window versus six matching units changes both material and labor. Oversized units also need heavier headers and sometimes a structural review.
- Existing opening condition: rot, out-of-square framing, or a header that won’t carry the new load means reframing. On older Long Beach bungalows this is the most common surprise, and we price it upfront rather than discovering it mid-job.
- Material and glass grade: wood-clad with a premium Low-E package runs well above vinyl with a standard coating. The gap between the two ends of the range is largely this choice.
- Permit and review scope: a straightforward replacement permit is one line item. A project inside a historic context or the Coastal Zone adds design review time and cost.
A written estimate from us covers template and survey, shop drawings, removal and disposal, reframing where we can see it, flashing and sealing, interior trim, and exterior patching. It does not cover hidden structural repair found after demo, painting beyond touch-up, or HOA and design-review fees. Those get quoted separately, in writing, before anyone swings a hammer.
See the difference
Before
After
Before
After
Before
AfterWhat Long Beach Homes Specifically Do to This Job
Long Beach sits where very old housing meets very new regulation, and a custom window project runs straight into both. In Rose Park, Belmont Heights, and the older blocks near the water, you’re working on 1920s and 1930s bungalows and Craftsman fourplexes inside a Coastal Zone and a designated historic context, which means Coastal Commission review and historic-district design review can land on the same small lot. A geometric window on a street-facing elevation in those neighborhoods may need approval before a single unit is ordered, and that review adds weeks to the schedule. The same window on a post-war tract house on the east side is a simpler permit.
The salt air off the Port of Long Beach is the other factor. It accelerates corrosion on fasteners and rots exterior wood and stucco trim, so we plan for repairing what’s behind the old window rather than assuming clean framing. Termite damage in the wood-frame bungalows is a routine discovery once the unit comes out. Santa Ana wind events push water past weak seals, and near-zero annual rainfall means small leaks go unnoticed for months and show up as rot instead of a puddle. On the dense 1950s – 70s fourplexes, we regularly find original knob-and-tube wiring and un-permitted additions built decades ago, which changes how an opening can be reframed.
We handle this job across Long Beach and the surrounding area. If the window work is part of a larger facade or envelope project, it sits under our Windows & Doors service, and you can see the broader scope on our Windows & Doors in Long Beach page. Homeowners often pair the exterior tear-out with Concrete Driveways & Concrete Work in Long Beach while the stucco is already open, or with Asphalt Driveways & Resurfacing in Long Beach when the approach is getting redone at the same time.
Serving Long Beach, CA – Our Local Coverage Area
We serve Long Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in Long Beach

Most jobs run four to seven weeks from final measurement to completion, with about a week of that being on-site labor and the rest lead time for custom shapes and permit review. Historic or coastal review in neighborhoods like Belmont Heights can add two to four weeks. Call (888) 345-8164 and we’ll give you a realistic date range for your specific openings.
Yes, window replacement and any change to an opening require a permit in Long Beach, and projects inside a historic context or the Coastal Zone may also need design review before work starts. We pull the permits and schedule the inspections so nothing stalls mid-job. Call (888) 345-8164 to talk through what your address will require.
Usually yes. Most geometric windows go into an existing opening, and we reframe within that opening rather than relocating anything. If the new unit is much larger or the old header can’t carry the load, we’ll flag it at survey and price the structural work separately. Call (888) 345-8164 to schedule a survey of your facade.
Expect $8,000 – $25,000 installed, with the range set by shape complexity, unit count, existing opening condition, material and glass grade, and permit or review scope. A single feature arch is a very different number from a full two-story facade of angled units. Call (888) 345-8164 for a line-item written estimate; it’s free.
Yes. Every custom and geometric window project is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That sits alongside the manufacturer’s warranty on the units themselves. Calls are answered by a live person, 24/7, and our technicians are background-checked and arrive in uniform.
Let’s Put a Real Number on Your Facade
A custom and geometric window job starts with somebody standing in front of your house, not a phone script. Call Groundwork Construction Co. of Long Beach at (888) 345-8164 and we’ll schedule a free on-site estimate: we template the openings, talk through material and glass choices, and hand you a line-item quote with the permit scope spelled out. No change orders mid-job, no surprises. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off.
Written by the team at Groundwork Construction Co.












