







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sliding & Patio Doors in Torrance, CA: What the Job Actually Involves
Replacing a sliding or patio door in Torrance usually takes one to two days for a standard slider and two to three days if we’re opening up a wall for a new unit or a multi-panel system. Expect $2,400 – $6,800 for a typical slider swap and $5,500 – $14,000 for a larger multi-panel or folding patio door, depending on size, glass package and whether the opening has to change. Call (888) 345-8164 and we’ll walk your actual opening and give you a written, line-item number.
How Groundwork Runs a Sliding & Patio Door Job, Stage by Stage

We don’t hand a door off to a sub and hope. Here’s the sequence we follow on Torrance sliding & patio doors, with the decisions that land on you and when.
Stage 1: On-site measure and opening assessment (day 0)
We measure the rough opening, check the header, confirm the sill height and look at what’s under the threshold. On a 1950s – 70s tract home that often means popping a small section of interior trim to see whether the framing is straight and whether there’s any rot at the sill. You get a written scope the same visit and decide on door style and glass package here, because lead times run three to six weeks on most made-to-order units.
Stage 2: Order, permit, and prep (weeks 1 – 5)
We pull the permit if the scope requires one and order the unit. You’ll confirm the finish (anodized aluminum, vinyl, or wood-clad), the glass (dual-pane, tempered, low-E) and the operating style. This is where the job either goes smoothly or doesn’t, so we don’t cut corners on the order.
Stage 3: Demo and opening prep (day 1)
The old door comes out, and we inspect the framing, sill pan and flashing. Any rot gets replaced before the new unit goes in. We set a proper sill pan and flash the opening; that step is what keeps South Bay moisture out for the next 20 years. Most single-day removals and prep finish by mid-afternoon.
Stage 4: Set, shim, seal, and finish (day 2)
The new door goes in, gets shimmed plumb and square, and the perimeter gets sealed. We test the rollers, the lock, and the screen. Interior trim and any drywall patching happen the same day, and you walk the finished opening with us before we pack up.
Stage 5: Final inspection and walkthrough (day 2 – 3)
If a permit was pulled, the city inspects. We schedule it, meet the inspector, and hand you the signed-off paperwork. Any punch items get handled before we call the job done. Every sliding and patio door we install is covered by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between on a Sliding & Patio Door
Three real decisions drive most of the cost and longevity on Torrance sliding & patio doors.
- Sliding vs. French vs. multi-panel: A single slider is the cheapest and easiest to live with in a tight tract footprint. French doors open wider but need swing clearance inside. Multi-panel and folding systems look great opening to a patio, but they cost two to three times a slider and need a wider header.
- Frame material: Vinyl is the value pick and handles Torrance’s salt air well. Aluminum is lighter and slimmer-profiled but conducts heat. Wood-clad gives the warmest look and the best insulation but needs periodic refinishing.
- Glass package: Dual-pane low-E is the standard. Tempered glass is required on units near a walking surface or in a door that’s part of an egress path. If you’re doing a full Windows & Doors in Torrance project, we can align the glass package across the whole house.
We carry Andersen and Marvin in the windows & doors line because they hold up and their parts are available. If you’ve seen our Windows & Doors service, this is the same crew and the same standards, just narrowed to your patio opening.
What Sliding & Patio Doors Cost in Torrance, CA

Plan on $2,400 – $6,800 for a standard slider replacement and $5,500 – $14,000 for a multi-panel or folding system in Torrance. A few variables move the number:
- Size and panel count: a 6-foot two-panel slider is the floor of the range; a 12-foot four-panel system with a folding track is the ceiling.
- Existing condition: a straight opening with sound framing keeps you at the low end. Rotten sills, out-of-square framing, or a header that has to change pushes the job up $800 – $2,000.
- Glass package: standard dual-pane low-E adds little; tempered or impact-rated glass adds $400 – $1,200.
- Permit scope: a like-for-like replacement may not require a permit; structural changes, egress path changes, or new openings do. We pull permits where required and pass inspections before final billing.
- Finish and trim: stained wood interior trim and custom thresholds add cost.
A written Groundwork estimate lists every line item, including demo, disposal, flashing, sealant, trim and inspection. What isn’t in it: unexpected rot or code corrections we couldn’t see until walls opened, and those get approved by you in writing before we touch them. Upfront pricing means the number in the estimate is the number you pay. You’ll also get $1,000 off any project over $10,000 and 0% financing for 18 months if you need it.
See the difference
Before
After
Before
After
Before
AfterWhat Torrance Homes Specifically Do to a Sliding & Patio Door Job
Torrance is a master-planned, post-war company town built around tract housing, and that shows up at every door we touch. Most of the stock is 1950s – 1970s single-family homes, and by the time a patio door reaches us, the original slider has usually been cycled open and closed tens of thousands of times. The rollers are flat, the tracks are worn, and the glass has fogged. On top of the mechanical wear, the salt air near the coast accelerates corrosion of the exterior fasteners, the flashing and the aluminum track, so a 20-year-old door here often needs replacement years before a door inland would.
Opening the wall gets interesting in older tracts. In neighborhoods off 182nd Street and near the 90504/90503 boundary, we regularly uncover original 1950s – 60s aluminum wiring and galvanized supply lines that trigger a code correction once the wall is open. If your patio door butts up against a kitchen or laundry wall, budget for that possibility up front. When the door is part of a broader modernization, homeowners often pair the job with a new Fence Repair in Torrance along the same yard, or with Paver Driveways in Torrance to tie the patio and driveway together.
Torrance’s mild, marine-influenced climate means we’re rarely weather-delayed on an exterior door install, but it also means water intrusion is subtle. A door with a bad sill pan won’t leak today; it’ll rot the subfloor over two or three winters. We treat flashing and sill pans as non-negotiable. We cover the whole city, including ZIP codes 90510, 90503, 90505 and 90501, plus nearby Torrance neighbors like Lomita, West Carson and Rancho Palos Verdes.
Serving Torrance, CA – Our Local Coverage Area
We serve Torrance and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Sliding & Patio Doors in Torrance

Most standard slider replacements take one to two days once the door arrives; multi-panel or structural changes run two to three days. The bigger variable is the lead time on the door itself, which is usually three to six weeks for made-to-order units. Call (888) 345-8164 and we’ll give you a real timeline for your opening.
A like-for-like replacement often doesn’t need a permit, but a new opening, structural change, or egress path change does. We check with the city on every job and pull the permit where required, and we meet the inspector on site so you don’t have to. Call (888) 345-8164 to lock in a free on-site assessment.
Yes, in most cases. A like-for-like slider replacement doesn’t touch plumbing or wiring. The complication shows up in older Torrance tracts where opening the wall reveals 1950s – 60s aluminum wiring or galvanized lines that need a code correction, and we flag any found condition in writing before proceeding. Call (888) 345-8164 to schedule your free estimate.
Standard slider replacements run $2,400 – $6,800 in Torrance, and multi-panel or folding systems run $5,500 – $14,000. Size, frame material, glass package and existing framing condition drive the spread. Call (888) 345-8164 for a written line-item quote – estimates are free.
Every install is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space. If it isn’t done right, we make it right. Manufacturer warranties on the door and glass run on top of ours. Call (888) 345-8164 to schedule your free estimate.
Get a Free Sliding & Patio Door Estimate in Torrance
We’ll come out, measure the opening, walk you through unit options and hand you a written line-item estimate. No pressure and no surprises on the invoice. A live person answers the phone around the clock, so you don’t have to wait until Monday. Call (888) 345-8164 to schedule your free estimate for sliding & patio doors in Torrance. Our technicians have up to 12 years of experience and arrive in uniform.
Written by the team at Groundwork Construction Co.












