







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Gutters & Accessories in Long Beach, CA: What the Job Actually Involves
Gutters & Accessories work in Long Beach typically runs $1,400 to $5,800 for a full replacement of a single-family home, and a straight run replacement on a small bungalow can land under $2,000. Most jobs take one to two days once materials are on site. The bigger variable here isn’t the gutter itself; it’s what the fascia and soffit look like after 80 years of salt air. Call (888) 345-8164 for a free on-site estimate and a written line-item quote.
How We Run a Gutter Job in Long Beach, Start to Finish

Gutter work looks simple from the sidewalk. It isn’t, especially on older Long Beach homes where the roof edge has been patched, re-roofed, and re-flashed more than once. Here’s the real sequence.
Stage 1: Roof-edge inspection (day 1, about an hour). We walk the perimeter and check the fascia board, the drip edge, and how the existing gutter is hung. On pre-1940 bungalows in Rose Park and Belmont Heights, this is where we usually find rot behind the gutter, not just in it. If the fascia is soft, the gutter replacement becomes a fascia repair too. You’ll know before we quote.
Stage 2: Written scope and material choice (day 1). We hand you a line-item quote the same day: gutter linear footage, downspout count, hangers, fascia repair if needed, and disposal. This is when you pick material and profile. You also decide whether to add gutter guards now or later. Adding them during installation is cheaper than a return trip.
Stage 3: Tear-off and prep (day 1, two to four hours). Old gutter comes down, fascia gets inspected board by board, and any rot gets cut out and replaced with primed lumber. We check that the drip edge is doing its job and that the roof edge is sound. If we find a roofing problem underneath, we flag it before going further; that’s part of a full Roofing in Long Beach scope and we’ll walk you through the options rather than sell you a gutter over a bad roof edge.
Stage 4: Installation (day 1 into day 2, four to six hours). Hangers go in at code-required spacing, seams are sealed or crimped depending on material, and downspouts are set to discharge away from the foundation. Pitch is checked with a level, not by eye. Runs over about 40 feet get an expansion joint so the gutter doesn’t buckle in summer heat.
Stage 5: Water test and walkthrough (day 2, about 30 minutes). We run water through every section and watch the downspouts. You get a walkthrough of what was replaced, what was repaired, and what to watch over the next rainy season.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Gutters & Accessories Options You’ll Choose Between
Most homeowners are choosing between aluminum and steel, and between a K-style profile and a half-round that suits a Spanish Colonial Revival roofline. Here’s the honest trade-off on each.
- Seamless aluminum (K-style): The default for good reason. Runs about $6 to $12 per linear foot installed. Won’t rust in the salt air, comes in colors that match stucco, and gets formed on site to your exact roofline. The trade-off is that it dents under a falling branch and can’t be patched invisibly.
- Galvanized or painted steel: $10 to $18 per linear foot. Stronger, holds up to debris better, but the marine layer off the Port of Long Beach will find any scratch in the paint and start rust. It suits homes where impact resistance matters more than color matching.
- Half-round aluminum or copper: $14 to $28 per linear foot. The right profile for historic and Spanish-style homes where K-style looks wrong from the street. Copper lasts decades and weathers to a patina, but costs three to four times what aluminum does.
- Gutter guards: $4 to $12 per linear foot depending on the system. Worth it under eucalyptus and ficus trees. Skip them under a clean tile roof with few overhanging limbs; you’ll spend more than you save.
- Downspout and drainage accessories: $15 to $60 per downspout for extensions, splash blocks, or buried discharge. On older Long Beach lots where the soil stays dry most of the year, keeping discharge well away from the foundation matters more than most homeowners expect.
What Gutters & Accessories Costs in Long Beach, CA

Full replacement on a typical Long Beach single-family home runs $1,400 to $5,800. A small bungalow with a simple roofline can land at the low end. A two-story home with multiple roof planes and long runs sits at the high end.
| Line item | Typical range |
|---|---|
| Seamless aluminum gutter, installed | $6 – $12 per linear foot |
| Steel gutter, installed | $10 – $18 per linear foot |
| Half-round or copper gutter, installed | $14 – $28 per linear foot |
| Downspouts (each) | $80 – $220 |
| Gutter guards | $4 – $12 per linear foot |
| Fascia repair (per board) | $60 – $180 |
| Gutter cleaning and resealing (existing) | $180 – $450 |
Four things push a job to the high end: total linear footage and how many separate runs there are, the condition of the fascia underneath, whether downspouts need to be rerouted to reach a drainage point, and the material grade you pick. A permit is rarely required for a straight like-for-like gutter replacement, but structural fascia repair or any change to the roofline can trigger one, and we’ll tell you upfront when it does.
Every written estimate lists the linear footage, hanger spacing, downspout count, fascia repair allowance, and disposal. What it won’t include unless we flag it: roofing repairs found under the drip edge, painting of new fascia, and any underground drainage work beyond the downspout discharge point. Our no-hassle upfront pricing means the number on the quote is the number you pay; if we find something mid-job, you approve it before we touch it.
See the difference
Before
After
Before
After
Before
AfterWhat Long Beach Homes Specifically Do to This Job
Long Beach sits in a Coastal Zone and much of its older housing stock falls within a designated historic context. That combination matters for gutter work more than you’d think. On the 1920s and ’30s Spanish Colonial Revival and Craftsman bungalows in Rose Park and Belmont Heights, the visible gutter profile is part of the streetscape, so a half-round or copper run may be the only option that survives historic-district design review. On the east-side stucco fourplexes and garden apartments built in the ’50s through ’70s, the fascia is often original, and the salt air off the Port of Long Beach has had decades to work on it. We routinely find fascia rot that’s been hidden behind a gutter for 40 years.
The other thing that shows up on older Long Beach multi-family buildings: un-permitted additions and original knob-and-tube wiring buried in the walls. If a gutter replacement turns into fascia repair near an electrical mast or an un-permitted bump-out, the scope changes and we plan for it. Contractors here also get the Santa Ana wind events, which is why hanger spacing on this job matters more than it does inland in Lakewood or Compton. When a gutter job overlaps a roofline problem, homeowners often pair this with Impact Garage Doors in Long Beach while we’re already on site and staging materials.
We cover Long Beach and the surrounding area, including Signal Hill, Carson, and Compton.
Serving Long Beach, CA – Our Local Coverage Area
We serve Long Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Gutters & Accessories in Long Beach

Most single-family gutter replacements take one to two days. Day one is tear-off, fascia inspection, and installation on the main runs; day two covers the remaining runs, downspouts, and the water test. Call (888) 345-8164 for an exact timeline on your house.
A like-for-like gutter replacement generally doesn’t require a permit. Structural fascia replacement or any change to the roofline can, especially in historic districts like Rose Park and Belmont Heights where design review applies. We handle the permit question before work starts and pull what’s needed. Call (888) 345-8164 to talk through your specific situation.
Full replacement typically runs $1,400 to $5,800, and cleaning plus resealing on existing gutters runs $180 to $450. Material choice and linear footage are the two biggest drivers. Call (888) 345-8164 for a free written quote with line items.
Usually yes, if the fascia is sound. On older Long Beach homes we often find rot behind the gutter, and in that case we repair fascia board by board rather than replace the whole roof edge. We check before we quote so there are no surprises. Call (888) 345-8164 to schedule an inspection.
Every gutter and accessory installation is covered by our 730-Day Done Right Promise. If something we installed fails within that window, we come back and make it right. Our technicians have up to 12 years of experience, and they’re background-checked and arrive in uniform. Call (888) 345-8164 with any warranty question.
Get a Free Gutters & Accessories Estimate in Long Beach
Call (888) 345-8164 to schedule a free on-site estimate for Gutters & Accessories in Long Beach. A live person answers, day or night, and we’ll set a time that fits your schedule. On the visit we inspect your fascia and roof edge, measure linear footage, and hand you a written line-item quote the same day, including material options and any fascia repair allowance. No change orders after the fact. Ask about our $1,000 off projects over $10,000 and 0% financing for 18 months while you’re on the phone. Our Roofing team can scope anything the roofline turns up, and if you’re also replacing a back door this season, homeowners often pair this with Sliding & Patio Doors in Long Beach.
Written by the team at Groundwork Construction Co. of Long Beach.












