







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in South Gate, CA: what the job actually takes
New cabinets and countertops in South Gate typically run $14,000 – $45,000 for a full kitchen’s worth, with most single-family homes here landing between $16,000 and $28,000. The work itself takes two to four weeks from demo to final caulk, and the bulk of that time is waiting on fabrication, not labor. Call (888) 345-8164 and we’ll price your exact layout, free, with a written line-item quote.
How the work runs, day by day

Kitchens in this city are small and the houses are old, so the sequence matters more than the schedule. Here’s the order we actually follow.
Stage 1: Measure and verify (day 1, about two hours)
We template the existing room and check what’s behind the walls before anything gets ordered. In South Gate that often means finding out whether the wall behind the current cabinets is original plaster, drywall over furring strips, or a previous owner’s patch job. Cabinet boxes can’t be ordered until we know the true wall plane, because a wall that’s out of plumb by half an inch throws off every filler and crown piece.
Stage 2: Demo and rough-in (days 2 – 4)
Old cabinets, counter, backsplash and the sink come out. If you’re moving the range or sink, this is when the plumber and electrician rough in the new locations. Circuit upgrades are common on these houses: a 1950s South Gate kitchen was wired for one outlet and a fridge, and a modern kitchen needs dedicated circuits for the microwave, dishwasher and at least four counter receptacles. That’s a decision point for you, and it’s the one that most often adds cost after demo.
Stage 3: Cabinet install (days 5 – 7)
Bases go in first, leveled and shimmed, then uppers hung to the laser line. This is where you’ll confirm door style, pull placement and whether you want soft-close on every drawer or only the uppers. We set the boxes and leave the doors off until the counter is in, so nothing gets scratched during fabrication delivery.
Stage 4: Template and fabricate (days 7 – 14, mostly waiting)
Once the bases are set, the countertop fabricator templates the actual installed cabinets, not the drawing. Stone and quartz get cut off-site, which is the long pole in the whole schedule. Expect 7 – 10 business days for quartz or granite, longer for a custom edge or an unusual sink cutout. You’ll pick slab, edge profile and sink model during this window, and you’ll want to have the sink on site before template day.
Stage 5: Counter set, sink and final trim (days 15 – 20)
The counter goes down, the undermount sink gets set and sealed, the dishwasher gets tied in, and we reinstall doors, drawers and hardware. Final walkthrough covers alignment, caulk lines and water testing. Most jobs are done in a single visit at this stage, but the whole project spans three weeks because of the fabrication gap. That gap is real and we won’t pretend otherwise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll actually make
Every kitchen comes down to four decisions. Here’s the honest trade-off on each, priced for this market.
- Cabinet construction: plywood box vs. particleboard. Plywood boxes hold screws better and survive a slow leak; particleboard is cheaper by roughly 15 – 20% and fine in a dry room. KraftMaid’s lines sit in the middle of that range and come in the door styles most homeowners here want.
- Reface vs. replace. If your boxes are square and the layout works, refacing saves real money. If the boxes are sagging or the layout is wrong, refacing just puts lipstick on a failing frame. We’ll tell you which one you have.
- Countertop material: quartz, granite or butcher block. Quartz runs $2,000 – $6,500 installed for a typical South Gate kitchen and needs no sealing. Granite is similar money and takes a sealer once a year. Butcher block is the budget end but needs oiling and dents.
- Sink and faucet. Undermount stainless is the default. Fireclay farmhouse sinks look great but need a cabinet modification, which adds cost and a week of lead time.
What Cabinets & Countertops costs in South Gate, CA

Plan on $14,000 – $45,000 for the full job, with cabinet installation at $4,000 – $13,000 and countertop installation at $2,000 – $6,500 as the two biggest line items. A kitchen island, if the room has space for one, adds $3,000 – $10,000. For a smaller, cabinet-only scope, you can land in the $9,000 – $20,000 range. Five things push a job toward the top of that band:
- Room size and cabinet count. A galley with 12 linear feet is a different job than an L-shape with 24.
- Condition behind the walls. Plaster, old wiring or a soft subfloor discovered at demo adds real dollars.
- Relocating plumbing or gas. Moving the sink or range means permits, a plumber and a longer rough-in.
- Material grade. Stock cabinets versus semi-custom, laminate versus quartz.
- Permit scope. Cosmetic swaps usually don’t require one; moving a wall, gas line or circuit does.
Your written estimate lists cabinets, counter, labor, delivery, haul-away and permit fees line by line. It does not include appliance purchases, backsplash tile, or repairs to whatever’s behind the old cabinets. Upfront pricing means the number you see is the number you pay, and our 730-Day Done Right Promise backs the workmanship in writing.
See the difference
Before
After
Before
After
Before
AfterWhat South Gate houses do to this job
The housing stock here is the story. Most homes in South Gate were built between the 1920s and 1960s, and a huge share of them are post-war stucco tract houses on tight lots off streets like Tweedy Boulevard and Firestone. That means two predictable problems: walls that aren’t square, and unpermitted additions from decades past that surface the moment a city inspector looks at the job.
We treat permit research and as-built verification as a standard first step here, not a surprise. If a previous owner converted a garage or bumped out a rear wall without a permit, the city inspection triggered by your kitchen permit will find it, and the fix belongs to you, not to us. Better to know before demo than after. Expansive clay soil is the other local factor: it shifts with seasonal moisture, and a kitchen floor that’s out of level by an inch is often foundation movement, not bad installation. We check that before we order cabinets.
Our crews cover all of South Gate, 90280, and the surrounding blocks, and the whole job ties into our Kitchen Remodeling service. If the scope grows beyond cabinets and counters into a wider rebuild, it becomes part of a full Kitchen Remodeling in South Gate project. Homeowners often pair this work with a Walk-In Showers & Shower Remodeling in South Gate job in the primary bath, and plenty of folks also ask about a Tub-to-Shower Conversion in South Gate while the dust is flying. You can see everything we cover in South Gate on our service-area page.
Serving South Gate, CA – Our Local Coverage Area
We serve South Gate and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Cabinets & Countertops in South Gate

Two to four weeks for most kitchens, with the fabrication wait for stone or quartz accounting for 7 – 10 of those days. Install labor itself is about five to six working days. Call (888) 345-8164 for a schedule based on your actual layout.
Straight replacement in the same footprint usually doesn’t require a permit. Moving plumbing, gas or electrical circuits does, and so does any wall change. We pull the permits and pass the inspections on those scopes, so you’re not chasing the city yourself.
Yes, and most South Gate kitchens don’t need it. Keeping the sink and range in place saves $2,000 – $5,000 in rough-in work and a couple of weeks of schedule. If the layout genuinely doesn’t work, we’ll show you the cost difference before you decide.
Most full-kitchen jobs land between $14,000 and $45,000, with $16,000 – $28,000 the common range for a typical 1950s South Gate home. Cabinet-only replacements run $4,000 – $13,000 and counters alone run $2,000 – $6,500. Call (888) 345-8164 for an exact quote, and the estimate is free.
Every project is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right, for two full years. Cabinet and counter manufacturers carry their own warranties on top of that. We also offer 0% financing for 18 months and $1,000 off projects over $10,000.
Get a real number on your South Gate kitchen
Call (888) 345-8164 for a free on-site estimate. A live person answers, day or night. We’ll measure the room, check what’s behind the walls, confirm whether a permit is needed, and hand you a written line-item quote before you commit to anything. Estimates and design consults are free, and the number on the page is the number you pay.
Written by the team at Groundwork Construction Co.












