







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Rancho Palos Verdes, CA: What the Job Actually Involves
Custom & geometric windows in Rancho Palos Verdes run $6,500 – $22,000 for a typical 3 to 6 window package, with lead times of 10 to 16 weeks because arched, trapezoid, triangular and radius units are fabricated to the opening rather than pulled from a shelf. The job itself takes three to seven working days on site once the units land: template, build-out or framing correction, setting, flashing, glazing trim, and stucco or drywall closure. Call (888) 345-8164 for a free on-site estimate.
How We Run a Geometric Window Project, Stage by Stage

Custom windows are unforgiving. There’s no “close enough” with a half-round that has to fit under a curved header, so the sequence matters more than the speed. Here’s what a real project looks like from first measurement to final walkthrough.
Day 1 – field measure and template. We measure each rough opening in multiple planes, check the header and sill for rack, and pull a physical template for arched and triangular units. On hillside homes this is also where we confirm the wall assembly and whether existing framing can carry a heavier custom unit. You decide nothing yet; you just approve the measured numbers in writing so there’s no surprise later.
Days 2 – 4 – final shop drawings and order. The manufacturer produces elevation drawings of every unit with dimensions, glass spec, divided-light pattern, exterior color and hardware. This is where you make most of your decisions: glass package, frame profile, grille configuration. We review the drawings with you line by line before they go to production. Nothing is ordered until you sign.
Weeks 2 – 16 – production. Lead time is real and it varies by complexity. A rectangular field-window custom might run 8 weeks. An arched radius transom in a Marvin or Andersen line often runs 12 to 16 weeks. We give you the quoted ship date up front and update you when the shop confirms.
Days 1 – 3 of install – demo and framing. We protect the interior, remove the existing units, and correct the opening. Geometric windows almost always demand a build-out here because the old opening was never built to the tolerance a custom unit needs. Small framing changes happen now.
Days 3 – 7 – set, flash, close, inspect. Windows set, shimmed and plumb, then flashed, sealed and finished on the exterior. Interior drywall or trim closure, then a water test on the perimeter before we call it done. Final walkthrough with you on the punch list.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
- Window material: wood-clad (a real wood interior with a factory aluminum or vinyl exterior) is the premium choice for Rancho Palos Verdes homes and what most of our custom work uses – warmer than all-vinyl and it takes a finish. All-vinyl costs less but is heavier, less dimensionally stable in heat, and often limited in custom shapes. Fiberglass splits the difference and holds up well against the marine air.
- Glass package: double-pane tempered is the baseline; laminated or impact-rated glass is the upgrade and the one we recommend on ridge-top homes facing Santa Ana wind exposure. Low-E coatings help with the coastal sun but you’ll want to pick the coating based on which side of the house the window sits on – east and west exposures behave differently.
- Shape and divided lights: true divided lites (individual glass panes with real muntins) cost more, weigh more, and look right on a traditional carriage-style facade. Simulated divided lites give the look for less and are easier to maintain. Pick based on what the rest of the house is doing.
- Exterior color and trim: factory-finish aluminum cladding comes in a fixed palette; custom color-match is available on some lines at an upcharge. Wood trim needs repainting on a coastal schedule – five to seven years is typical here, not the ten you’d get inland.
- Hardware and screens: casement cranks, awning operators, screen options. Small line items with real longevity differences; ask about parts availability before you commit.
What Custom & Geometric Windows Cost in Rancho Palos Verdes, CA

Most geometric and custom-shape window packages in Rancho Palos Verdes land between $6,500 and $22,000 installed. Five variables push a job from the low end to the high end.
- Number and size of units. A single arched transom over a front door is a much smaller project than six trapezoid windows in a vaulted great room.
- Shape complexity. Circles, half-rounds and trapezoids require more shop labor and more framing correction at the opening. Expect the per-unit cost to climb as the geometry gets less rectangular.
- Existing opening condition. Homes built in the 1950s through 1990s often have out-of-square openings, rotted sills or missing flashing. That build-out is real labor and it’s the biggest single swing in price.
- Glass and frame grade. Impact-rated laminated glass and wood-clad frames both add cost; the difference between baseline and premium glass on a six-window package can run several thousand dollars.
- Permit scope. Like-for-like replacement is usually a simple permit in this city; adding new openings or changing size and location triggers plan check and possibly structural review.
A written estimate from us shows the line item for each unit, framing and build-out labor, flashing and trim materials, permit fees and disposal. It doesn’t include unforeseen rot, damaged framing behind the wall, or structural repairs triggered by what we find on demo – those get priced and approved by you before we touch them, not billed after. Our upfront pricing means the number in the written quote is the number you pay, and every project is covered by the 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Rancho Palos Verdes Homes Specifically Do to This Job
Rancho Palos Verdes is dominated by steep, geologically active coastal slopes and landslide complexes, so window work here is as much about grade, drainage and slope stability as it is about the glass. On streets near Portuguese Bend and other slide-prone zones, a new opening isn’t just a framing decision – the wall we’re building into may sit on a caisson foundation with a specific drainage story behind it, and heavy sideload on the exterior wall matters. We check how the wall carries before we order anything, and on downhill-facing walls the flashing detail matters far more than it would on a flat lot in Torrance.
Housing stock in the 90275 ZIP runs to custom and semi-custom single-family homes built from the 1950s through the 1990s, many with large terraced lots and original construction that’s been through one or two remodels already. We regularly find windows that were swapped once before with no flashing correction, which is why water shows up at the sill after the first big winter rain. Salt-laden coastal air eats exterior finishes faster than the framing, so aluminum-clad exterior trim outlasts a painted wood exterior by years.
If the project is part of a full room rebuild, our Windows & Doors in Rancho Palos Verdes page covers the broader scope; this page stays on the custom-shape work. For a wider view of the category, see our Windows & Doors service. We handle custom window projects throughout Rancho Palos Verdes and the surrounding hillside neighborhoods. Homeowners often pair new exterior windows with a driveway refresh at the same time – if that’s on your list, see Concrete Driveways & Concrete Work in Rancho Palos Verdes or, on the resurfacing side, Asphalt Driveways & Resurfacing in Rancho Palos Verdes.
Serving Rancho Palos Verdes, CA – Our Local Coverage Area
We serve Rancho Palos Verdes and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in Rancho Palos Verdes

Ten to sixteen weeks from signed order to final walkthrough on most jobs, and the long pole is manufacturing, not installation. The on-site work is typically three to seven working days; field measure, shop drawings and approval add two to four weeks before the units go into production. Call (888) 345-8164 for a timeline against your specific opening sizes.
Usually yes, and the scope drives the process. Like-for-like replacement of an existing window is a straightforward permit; adding a new opening, changing size or location, or cutting into a structural wall triggers plan check and may pull in a structural or geotechnical review given the hillside conditions on many lots in the 90275 ZIP. We pull the permits and handle inspections as part of the project. Call (888) 345-8164 and we’ll tell you what permit scope your specific job needs.
Often yes, especially when the opening already exists and only the geometry changes. If we’re adding a new shaped window or enlarging an existing one, we check the framing first and tell you exactly what’s involved before we order. Call (888) 345-8164 to schedule a free on-site assessment.
Plan on $6,500 – $22,000 installed for a typical 3 to 6 window package, with cost driven by number of units, shape complexity, existing opening condition, glass and frame grade, and permit scope. We give you a line-item written quote, a fixed price, and 0% financing for 18 months plus $1,000 off projects over $10,000 is available. Call (888) 345-8164 for an exact number – estimates are free.
You get two layers of coverage: the manufacturer’s warranty on the window units themselves, and our 730-Day Done Right Promise on the installation and workmanship. If something isn’t right, we make it right. Call (888) 345-8164 to talk through what’s covered on your specific project.
Get a Free Estimate on Custom & Geometric Windows in Rancho Palos Verdes
Call (888) 345-8164 to schedule a free on-site estimate. A live person answers around the clock, so there’s no voicemail to sit through. On the call we’ll get your opening sizes and the look you have in mind, book a time that works, and bring the measure and template kit out. You’ll have a written, line-item quote with the firm price and a clear lead time in hand – no pressure, no change orders later. We’re licensed and insured, and our technicians have up to 12 years of experience on custom window work.
Written by the team at Groundwork Construction Co.












