







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Torrance: What It Costs and How Long It Takes
Concrete driveway installation in Torrance typically runs $4,500 – $12,000, and most driveways are poured, cured and drivable in about 5 to 7 days including demo and grading. Concrete flatwork around the house – aprons, side yards, walkway slabs, steps, pads for equipment – gets quoted by the square foot off the same base mix and finish choices. Call (888) 345-8164 to schedule a free on-site estimate; we put the number in writing before anyone touches your slab.
How We Do Concrete Driveways & Concrete Work, Stage by Stage

Concrete is unforgiving. Everything that goes wrong happens under the surface, and once the pour is finished you can’t see it or fix it without tearing it out. So the sequence matters more than the finish. Here’s the real order of operations for a driveway or flatwork job in Torrance.
Stage 1: Measure, layout and site walk (day 1, about an hour). We measure the existing drive, check the slope away from the garage, note drainage paths and any utility covers, and confirm where the new slab will meet the street apron. You decide the width and whether you’re keeping the same footprint or widening toward the property line. This is also when we confirm whether the city will require a driveway approach permit.
Stage 2: Demo and hauling (day 1 or 2, one full day). Old concrete gets broken out with a hoe ram and hauled off. Root intrusion, failed subgrade and buried sprinkler lines all turn up here. You don’t have to decide anything during demo – we photograph what we find and tell you if the base needs more work than the estimate assumed.
Stage 3: Subgrade prep and base (day 2 or 3, one to two days). We excavate to depth, compact the native soil, and bring in a compacted base. A driveway needs 4 inches of base under a 4-inch slab minimum; heavier vehicles or a wider drive push that up. Rebar or mesh goes in at this point – #3 rebar on 18-inch centers for a driveway, mesh for lighter flatwork. You’ll choose rebar versus mesh at the estimate, and I’ll tell you honestly when mesh is enough and when it isn’t.
Stage 4: Form, inspect and pour (day 3 or 4, one long day). Forms go up, the grade gets checked with a laser, and any required inspection happens before the truck arrives. Pouring a typical two-car drive takes a few hours. Then finishing: broom finish for traction, saw-cut control joints within 24 hours, and edge cleanup. You choose the finish here – broom, exposed aggregate or a light stamp, but stamped concrete is its own job with its own page.
Stage 5: Cure and joint seal (days 4 through 10). Concrete needs 7 days to reach most of its strength and 28 days to fully cure. You can walk on it after 24 to 48 hours and drive on it after about 7 days, longer in cool foggy weather. We come back to seal the control joints and confirm the slab drained the way it should.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
These are the decisions that change both the price and how the drive holds up. Most homeowners land here:
- Plain broom-finished concrete: the standard choice, roughly $8 – $14 per square foot installed in this market. Good traction, low maintenance, hides tire marks reasonably well. It’s the value pick for a rental or a drive you’ll never look at twice.
- Exposed aggregate: adds $2 – $4 per square foot. The top paste is washed away to reveal the stone underneath, which hides cracks and stains better than broom and looks sharp on a Torrance drive. Rougher underfoot, harder to shovel.
- Colored and integral-dyed concrete: adds $1 – $3 per square foot. Color goes into the mix, not on top, so it won’t peel. The trade-off is that color fades unevenly over a decade in coastal sun, and patch repairs never match.
- Rebar vs. mesh: rebar costs more per square foot but adds real tensile strength for a drive that takes a truck or RV. Mesh is fine for walkway slabs and pads.
- Base thickness and drainage: a 4-inch slab on 4 inches of compacted base is the floor. Wet or clay-heavy spots need more. This is where cheap bids get thin – they pour 3 inches over dirt and it cracks within two winters.
- Quikrete and Oldcastle bagged mixes: for small pads, steps and repairs we use these where a ready-mix truck can’t reach. Standard, consistent, and you know exactly what’s in them.
What Concrete Driveways & Concrete Work Costs in Torrance, CA

A full concrete driveway installation in Torrance runs $4,500 – $12,000. A replacement – tearing out the old slab first – runs $5,000 – $14,000. Here’s what moves that number from the low end to the high end:
- Size. A single-car drive at the low end, a wide two-car or an RV-length drive at the top. Square footage is the single biggest driver.
- Existing condition. Cracking, root heave or a slab poured over junk subgrade means more demo and more base. Driveways with a tree root problem can add $1,000 or more in excavation.
- Access. A drive the truck and skid steer can reach down a wide alley is cheap. A tight Torrance side yard where the concrete has to be wheeled in by hand in a buggy adds labor and time.
- Finish and color. Broom at the bottom, exposed aggregate or integral color toward the top.
- Permits and inspections. Many Torrance driveway and approach projects require a city permit, and that cost and inspection schedule get built into the quote, not bolted on later.
Your written estimate should list demo, hauling, base, reinforcement, forming, the pour, finishing, control joints, cleanup and the permit line as separate line items. What typically isn’t included unless we quote it: drainage corrections, retaining walls at a slope, and sod or landscaping repair where the excavator tracked through. We price those up front so the number you see is the number you pay. Ask about the $1,000 off projects over $10,000 and 0% financing for 18 months while you’re at it.
See the difference
Before
After
Before
After
Before
AfterWhat Torrance Homes Specifically Do to This Job
Torrance’s housing stock shapes concrete work in ways you won’t see five miles inland. Most of the city is 1950s – 1970s single-family tract homes on simple slab-on-grade foundations, which means the existing driveway slab is often 50 to 70 years old and sitting on original subgrade that’s had decades to settle. We regularly find cracked slabs with no base underneath at all – just concrete poured directly on dirt – in the older tracts off 182nd Street and near the 90503/90504 boundary. That’s the failure you’ll be told to replace.
The mild marine climate here is forgiving on the pour itself: cool coastal fog and limited rain mean we rarely lose a day to weather, and there’s no hard freeze-thaw cycle to spall the surface. Salt air near the coast is the real enemy, and it goes after the reinforcement and fasteners more than the concrete. That’s why we spec rebar with adequate cover and galvanized anchors on any drive within reach of the sea breeze.
The other local factor is the city itself. Torrance has strict, city-specific residential design standards, and a driveway approach that widens or moves a curb cut usually means a permit and an inspection before the pour. It’s not a fast process, but pulling the permit correctly is what keeps you out of trouble when you sell. We handle that step for you. If your project is bigger than a driveway, homeowners often pair this with Garage Conversion ADU in Torrance work or a New Detached ADU in Torrance, where the new footprint has to tie into existing concrete and drainage.
Serving Torrance, CA – Our Local Coverage Area
We serve Torrance and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Concrete Driveways & Concrete Work in Torrance

Most concrete driveways in Torrance are finished in 5 to 7 days from demo to final cleanup, and you can drive on the slab about 7 days after the pour. Tight side-yard access or extra base work can extend that by a few days.
Many driveway and approach projects in Torrance require a city permit, especially when the curb cut changes or the drive widens. Walkway slabs and equipment pads usually don’t. We tell you at the estimate which category your job falls into and pull the permit when it’s needed.
Expect $4,500 – $12,000 for a new concrete driveway in Torrance and $5,000 – $14,000 if the old slab has to come out first. Size, existing condition and finish choice move the number most. Call (888) 345-8164 for an exact quote – estimates are free.
Not on our jobs unless you approve a change. We inspect the subgrade before we quote, and if we uncover something we couldn’t see – a buried line, failed base, root damage – we show you the photos and give you a written price before doing the extra work.
Every job we do is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship. Concrete itself is a natural material and minor hairline cracking is normal, but a structural failure or a bad pour is on us to correct.
Get a Free Concrete Estimate in Torrance
We’ll come out, measure the actual job, check the subgrade and give you a written, line-item estimate with the permit scope and drainage addressed up front. A live person answers when you call – 24 hours a day – so you’re not stuck leaving a message. Call (888) 345-8164 to schedule your free estimate for concrete driveways & concrete work in Torrance. If your project is part of a wider yard or hardscape plan, start with our Driveway & Pavers service, or see the full Driveway & Pavers in Torrance page and our Torrance service area.
Written by the team at Groundwork Construction Co. of Long Beach.












