







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Torrance, CA: What It Costs and How Long It Takes
A chain link fence in Torrance runs $3,500 – $9,000 for a typical residential install, with most standard side- and back-yard runs landing in the $3,500 – $5,500 band. A straightforward 100 – 150 linear foot run takes one to two days on site once the marking is done, and we lead every project with a free on-site estimate and a written line-item quote. Call (888) 345-8164 and a live person picks up, day or night.
How a chain link fence goes in, stage by stage

Chain link is fast, but it isn’t slapdash. The order of operations decides whether the fence is still plumb after a decade of Santa Ana wind and coastal fog. Here’s what the two days actually look like.
Day 1: Marking, utility locate, and demolition
We start by walking the property line with you and setting string lines at the fence height and setbacks you want. Then the 811 utility locate gets called and we wait for the marks before any shovel touches dirt; nobody wants to find a gas line with a digging bar. If there’s an old fence or a failed concrete footing run, it comes out now. On a typical Torrance tract lot this is a half day, and it’s where you decide which gate goes where.
Day 1 – 2: Post holes and concrete footings
Terminal posts, corner posts, and gate posts get set first because they carry the tension. Holes are dug to depth, posts are set plumb, and concrete goes in around them. Galvanized pipe is the standard. For coastal Torrance exposures we’ll often set stainless or hot-dip galvanized hardware where the posts meet the rail so the corrosion doesn’t start at the joint. Footings need curing time, so this is often the overnight pause.
Day 2: Tension rails, fabric, and top rail
Top rails go on, the tension wire or bottom rail is set, and the chain link fabric gets stretched and tied off. This is the stage where sloppy work shows up later as sagging fabric or a top rail that’s bowed. We tension by machine, not by hand, and the ties go on at consistent intervals.
Day 2: Gates, latches, and hardware
Walk gates and drive gates get hung next, with the frame, hinges, and latch set at the right height for a level swing. On a sloped Torrance yard we’ll set a gate to clear the grade without dragging on the asphalt or the concrete. You’ll walk the gates and the whole run with us before we pack up.
Day 2 or 3: Final walk and cleanup
We walk the full fence line with you, check the tension and the gate swing, haul off the old material, and leave the yard swept. If the job runs long, that’s usually the utility locate delay on the front end, not the install. Most jobs are done in a single visit once the concrete has cured.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The chain link options you’ll actually choose between
Chain link isn’t one fence. Most of the choices come down to height, gauge, coating, and gate hardware, and each has a trade-off you should hear before you sign.
- Galvanized vs. vinyl-coated fabric. Bare galvanized is the cheapest and the most honest. Vinyl-coated (green or black) costs about 15 – 25% more but holds up better against the salt air near the coast and looks less like a ball field. On a Torrance property half a mile from the water, coated is usually worth the upcharge.
- Gauge and wire diameter. 11.5 gauge is the residential standard. 9 gauge is heavier and stiffer, which matters for larger dogs or a run that takes a lot of wind. 12.5 gauge is lighter and cheaper and shows its age sooner.
- Height. 4′ is common for a small yard with no pets. 5′ and 6′ are the standard pet and pool-code heights. If you’re fencing around a pool, check the local pool safety requirements before we order.
- Framework. Top rail and tension wire versus top rail plus bottom rail. Bottom rail adds cost but keeps the fabric from flaring out at the ground, which matters on a dog run.
- Gates and hardware. A basic walk gate, a self-closing walk gate, or a double drive gate. Gate posts are bigger and set deeper, so a second gate is where budgets tend to move. Stainless hinges and latches cost more and last longer in salt air.
- Finishes. Standard galvanized ties, or coated ties and tension bands to match the fabric. Cost is small; the longevity difference near the coast is not.
We quote from brand partners we’ve worked with on other exterior work here, and we’ll tell you plainly which spec fits your yard instead of selling the heaviest option. On a post-and-rail privacy look, the spec is different, and that’s part of the wider Fence Installation in Torrance conversation.
What a Chain Link Fence costs in Torrance, CA

Plan on $3,500 – $9,000 for a residential chain link fence in Torrance. The low end is a 100-foot run of galvanized fabric on a flat back line. The high end is a 200-plus-foot perimeter with two gates, coated fabric, and a lot of old fence to haul out. Here’s what pushes the number.
- Length and gate count: the biggest lever. Two walk gates instead of one adds roughly $300 – $700, and a drive gate adds more.
- Height and gauge: going from 4′ 11.5-gauge to 6′ 9-gauge is a meaningful jump on a long run.
- Fabric and hardware finish: vinyl-coated fabric and stainless hardware raise the price for real longevity in coastal air.
- Site conditions: sloped lines, roots, hard-packed soil, and demolition of an existing fence all add labor. So does a line that has to be set back from a property line.
- Permits: if your fence crosses into a required permit scope, the permit and inspection add cost and a week or two of schedule.
Your written estimate lists the footage, the gauge, the fabric type, the gate count and hardware, the demo, and the footing depth. What typically isn’t included: trimming or removing trees that block the line, relocating an irrigation line or sprinkler head, or resolving a property-line dispute with a neighbor. We flag those in writing before work starts so the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Torrance homes do to a chain link job
Torrance is a master-planned, post-war company town, and the housing stock still carries that era’s fingerprints. Most of the lots we fence are 1950s – 1970s tract homes on registered survey lines, which is good news for a chain link run: the side yards are usually wide, the lines are straight, and the setbacks are on record. The catch is the occasional older lot near the 90504/90503 boundary, where a previous fence was set on an unrecorded line and the new fence has to be surveyed back to the true boundary.
Salt air is the real local factor. Torrance’s marine fog and the cool coastal side of the city push corrosion onto the galvanized hardware much faster than a job ten miles inland would see, which is why stainless and coated hardware come up in almost every quote near the coast. Utility locates matter here too: the older tract lots off 182nd Street sometimes have irrigation and gas lines drawn loosely on the original plans, so 811 is not optional. And if your fence line sits near a pool or a rear property line shared with a neighbor, check the city’s fence rules before we order materials. When the fence is part of a bigger exterior project, the wider scope gets its own plan and we cover the whole Torrance area from here.
Homeowners often pair this with Concrete Driveways & Concrete Work in Torrance to reset the driveway apron or patch around gate posts, and with Asphalt Driveways & Resurfacing in Torrance when the drive gate has to line up with a new pavement surface. For the wider scope, our Fence Installation service covers the rest of the exterior. Our technicians have up to 12 years of experience, and we bring background-checked, uniformed crews to every job.
Serving Torrance, CA – Our Local Coverage Area
We serve Torrance and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Chain Link Fence in Torrance

A typical residential chain link fence in Torrance takes one to two days on site, plus curing time for the concrete footings. Most of that time is post setting. Call (888) 345-8164 and we’ll give you a firm schedule with your written quote – estimates are free.
Some fences in Torrance need a permit and some don’t, and it depends on height, location, and whether the fence is near a pool. We check the current rules for your specific property before we order materials, and we pull what’s required. Call (888) 345-8164 to review your address with us.
Most Torrance chain link fences run $3,500 – $9,000, with the middle of the range around $5,000 for a standard side and back run. Height, gauge, gate count, and demo of an old fence move the number. Call (888) 345-8164 for an exact quote – estimates are free.
No, not on a written line-item estimate. Our quotes are upfront and fixed, so the number you see is the number you pay. If we find something the quote didn’t cover, like a buried utility line or a survey issue, we stop and get your approval in writing before we touch it.
Every chain link fence we install is covered by the 730-Day Done Right Promise: if the workmanship isn’t right, we make it right. That applies to the posts, the fabric tension, and the gate hardware. Call (888) 345-8164 to schedule your free estimate.
Get a free chain link fence estimate in Torrance
Call (888) 345-8164 for a free on-site estimate. We’ll walk the line with you, measure the footage, talk through gauge and gate placement, and put a written line-item quote in your hands. A live person answers every call, 24/7. No voicemail, no waiting until Monday. Proudly serving the Torrance area with upfront pricing and the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.












