







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wood Fence in Torrance, CA: What It Costs and How Long It Takes
A wood fence in Torrance, CA typically runs $3,500 – $9,000, and most residential lots are finished in two to four working days from the first post hole to the last picket. You’re pricing a fence because an old one is leaning, a property line needs a real boundary, or you’re adding privacy you never had. Call (888) 345-8164 and we’ll walk the line with you, measure it, and put a written number in your hands. No pressure, no vague “starting at” games.
How a Torrance Wood Fence Goes In, Stage by Stage

Wood fencing isn’t complicated, but the sequence matters. Skip a step and you get posts that heave, rails that sag, and boards that cup within a season. Here’s what the job actually looks like when we run it.
Day 1, morning: layout and property line
We start by finding the actual property line, not the neighbor’s assumption of it. If there’s a recent survey, we use it. If not, we work off the existing fence pins and any recorded plat you have. You decide right here whether to fence the exact line or set back a few inches onto your side to stay clear of a boundary dispute. That single call affects everything that follows.
Day 1, afternoon: demo and footing
Old fence comes out and gets hauled off, not piled in your side yard. We dig post holes to depth and set them in concrete, because Torrance’s slab-on-grade soil and the marine air both punish posts that are merely tamped into place. Posts cure overnight before anything gets hung on them.
Day 2: framing
Rails go on once the posts are set. You’ve already picked rail count by this point (two or three per section), and this is where that decision shows itself: three rails hold straight under a leaning dog or a vine load, two are fine for a short run of fence that’s mostly decorative.
Day 3: boards and gates
Pickets or dog-ear boards go up, spaced to your chosen gap or butted tight. Gates get hung and swung here, and we check the latch and the swing clearance against your driveway and your walkway before we call it done. If a gate is going to drag on a slope, you find out on day three, not month six.
Day 4: finish and walkthrough
Final trim, cap rail where you asked for one, and a walk down the whole run with you in person. We point out what’s covered under our 730-Day Done Right Promise and hand over anything for your records. Most jobs land in this four-day window; a long, gated, custom run can push to five.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Wood Fence Options You’ll Actually Choose Between
Wood is not one material. The species, the cut, and the height you pick drive both the price and how the fence looks five years from now.
- Cedar: The default for a reason. Naturally resists rot and insects, holds stain well, and handles the cool, damp South Bay air without the swelling problems of cheaper wood. It sits at the top of the price range but earns it.
- Pressure-treated pine: The value pick. Cheaper by a wide margin, takes stain fine, but it’s heavier, more prone to checking and warping, and near the coast you’ll want to keep up on the finish coat. Good for a budget boundary you plan to keep for ten years, not thirty.
- Dog-ear vs. flat-top boards: Dog-ear pickets are the classic look and shed water at the top edge. Flat-top reads cleaner and more modern, and pairs naturally with a cap rail. Pick based on the house, not the catalog.
- Height and rule of thumb: Six-foot is the privacy standard for most Torrance lots. Four-foot reads as a boundary marker, not a screen. Whatever you pick, check your local height limits before we order boards.
- Solid vs. spaced boards: Butted-tight gives full privacy and blocks sightlines. Spaced boards let light and air through and cost less in material. Most homeowners want solid for the street-facing side and don’t care on the property line.
- Posts and rails: More rails mean a straighter, longer-lived fence. A cap rail protects the top edge and adds years. We’ll price both so you see the difference.
What a Wood Fence Costs in Torrance, CA

For a standard residential lot, expect $3,500 – $9,000. That’s the honest range, and here’s what pushes a job from the bottom of it to the top:
- Linear feet: The single biggest lever. A short backyard run sits near $3,500; a full perimeter around a large lot climbs toward $9,000.
- Existing condition: A fence that comes out cleanly and easily is cheaper to remove than one tangled in roots, vines, or old concrete footings that have to be broken out.
- Material grade: Cedar over pine, thicker posts, more rails, and a cap rail all add to the number. Good bones cost more up front and less over time.
- Gates and hardware: Each gate adds labor, framing, and hardware. Multiple gates, or one wide enough for a vehicle, move the total.
- Terrain and grade changes: A sloped line needs stepped panels or racked boards, and that’s slower work than a flat run across a Torrance tract lot.
A written estimate lists posts, rails, boards, concrete, haul-off, and gates as separate line items, so you can see exactly where the money goes and cut scope if you want to. What it typically doesn’t include unless we call it out: a formal survey, HOA submission fees, or major grading. We flag anything like that before you sign, not after. Upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Torrance Homes Specifically Do to a Wood Fence Job
Torrance is a master-planned, post-war company town, and that shows up in the fencing. Most of the housing stock dates to the 1950s through 1970s, so a huge share of the fences we replace here are as old as the tract itself or have already been patched together two or three times. In the older tracts off 182nd Street and around the 90504/90503 boundary, it’s common to find original posts set shallow and rusted-through fasteners holding the whole run together. The mild marine climate with cool coastal fog means we’re rarely weather-delayed on a wood fence install, which keeps timelines tight, but the salt air near the coast eats exterior fasteners and hardware faster than inland buyers expect. That’s why we spec corrosion-resistant hardware and set posts in concrete, not just tamped soil. If your fence replacement is part of a full Fence Installation in Torrance scope, or you’re pairing it with driveway work, we scope the whole thing together. We cover all of Torrance, from 90501 to 90505 and everywhere in between. To see the wider service, visit our Fence Installation page, or check the Torrance service area for the full picture.
One more local note: homeowners often pair a new fence with a fresh hardscape. If you’re redoing the driveway at the same time, we handle Paver Driveways in Torrance and Concrete Driveways & Concrete Work in Torrance, so the fence line, the gate, and the driveway come out looking like they belong together instead of three separate afterthoughts.
Serving Torrance, CA – Our Local Coverage Area
We serve Torrance and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Wood Fence in Torrance

Most residential wood fences are complete in two to four working days, with posts curing overnight between day one and day two. Larger perimeter runs with multiple gates can push to five days.
Many wood fences fall under local height limits and don’t require a permit, but anything taller, on a corner lot, or near an easement can trigger review. We check the current rules for your address before we order material, so there are no surprises at inspection. Call (888) 345-8164 and we’ll confirm what your specific lot needs.
Yes. A wood fence replacement is a standalone job that doesn’t move plumbing, wiring, or structure. We work around existing landscaping where we can, and anything we have to clear gets flagged before the first post comes out.
Plan on $3,500 – $9,000 for a standard residential lot, driven mostly by linear feet, material grade, and how many gates you want. Call (888) 345-8164 for an exact quote built as a written line-item estimate, free of charge.
Our workmanship is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. Material warranties vary by species and manufacturer, and we’ll spell yours out on the estimate so you know exactly what’s covered.
Get a Free Wood Fence Estimate in Torrance
If you’re ready to price a wood fence in Torrance, start with a free on-site estimate. We walk the property line with you, measure the run, talk through cedar versus pine and how many gates you need, and leave you with a written line-item number. Calls are answered by a live person, 24/7. Dial (888) 345-8164.
Written by the team at Groundwork Construction Co.












