







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Impact Windows & Doors in Gardena: What the Job Actually Involves
Impact windows & doors in Gardena run $8,000 – $25,000 for a typical whole-house package, with most single-story tract homes landing between $11,000 and $17,000. The work takes two to four days for a standard house once materials arrive, and custom door units can stretch the order to five or six weeks. Impact-rated units combine laminated glass, a reinforced frame, and a tested anchoring system that holds the assembly together under wind-borne debris and forced entry. Call (888) 345-8164 to schedule a free on-site estimate.
How We Run an Impact Window & Door Job, Start to Finish

Every job follows the same five stages. The durations below assume a normal single-story Gardena home with eight to twelve openings.
Stage 1: Measure and product selection (day 1, about 90 minutes)
We open and close every window and door you’re replacing, check the rough opening dimensions against the wall framing, and note which units are in stucco versus wood siding. You decide the glass package (laminated only, or laminated with a low-E coating), the frame color, and whether the doors swing or slide. This is where the real money decisions get made, so we put the numbers side by side before anything is ordered.
Stage 2: Permit and order (days 2 to 10)
We submit the permit application to the City of Gardena’s building department with the product approval documentation attached. Impact-rated products come with manufacturer test reports, and the plan checker will want to see them. Once the permit is issued, the units go into production. PGT and similar impact lines typically ship in three to five weeks; stock sizes come faster.
Stage 3: Material delivery and staging (day before install)
Units arrive crated and get staged in the garage or a side yard. On a tight Gardena lot, that delivery has to be timed around street parking, so we confirm the drop window with you a day ahead. Each opening is labeled with its own unit so the installers aren’t guessing on the morning of.
Stage 4: Removal and installation (days 1 and 2 of the install window)
Old units come out one at a time, not the whole house at once, so your home stays weather-tight overnight. Installers set each new unit in the opening, shim and level it, and anchor through the frame into the wall structure per the manufacturer’s instructions. Flashing goes on before trim. Spray foam and sealant close the gap between frame and rough opening. Four to six openings fit in a day.
Stage 5: Stucco, trim, and inspection (day 3, plus the city visit)
Exterior stucco patching and interior trim go on last. The Gardena inspector checks anchors, flashing, and the glass label on each unit, then signs off. You walk the job with us before we pack up. Any punch items get written down and scheduled.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Impact products aren’t one thing. What you pick changes both the price and how the house feels day to day.
- Frame material: vinyl vs. aluminum. Vinyl impact frames cost less and insulate better; aluminum is stiffer and handles larger glass spans on big sliding doors but conducts heat. For most Gardena homes, vinyl is the practical pick except on oversized openings.
- Glass package: laminated only vs. laminated with low-E. Standard laminated glass meets the impact standard. Adding a low-E coating cuts solar heat gain, which matters on west-facing walls in the South Bay. It adds roughly 8 – 15% to the glass cost.
- Single-hung vs. casement vs. slider. Single-hung is the cheapest and the most common in 1950s stock. Casements seal tighter and open outward but cost more and need clearance. Sliders make sense for patios and tight interior corners.
- Impact doors: hinged vs. sliding. A hinged impact entry door runs more than a standard door but gives you the forced-entry rating. Sliding glass doors are the biggest single line item because of the glass area.
- Brand tier. PGT and similar rated lines carry full test documentation for permitting; some import products are cheaper but can stall plan check if the paperwork isn’t complete.
- Finish and hardware. Color-matched frames, upgraded handles, and screens are all separate line items. None of them are structural, but they’re where budgets drift.
What Impact Windows & Doors Costs in Gardena, CA

Expect $8,000 – $25,000 for a full impact window and door package on a Gardena home. A partial replacement, say four to six windows, usually falls at the low end. A whole-house package with two sliding doors sits at the top.
Five variables push the number up or down:
- Opening count and size. Each opening carries labor, material, and permit line items. Large sliders cost several times what a standard window does because of glass area.
- Existing wall condition. Original 1950s stucco often cracks out around old frames. If the framing behind is soft or out of square, we’re into carpentry repair that isn’t in a base quote.
- Second story or ladder work. Gardena stock is mostly single-story, which keeps labor down. Any two-story work adds staging and safety time.
- Permit scope. Like-for-like replacement is a simpler permit than a change in opening size or a new door location, which triggers framing and possibly structural review.
- Product tier and glass upgrades. Low-E, laminated-plus, custom colors, and hardware upgrades all add. We write every one of them on the estimate.
A written estimate from us includes the units, removal and disposal, installation labor, flashing and sealant, stucco patch, permit fees, and inspection coordination. It does not include interior painting, drywall repair from prior water damage, or structural repair if we open a wall and find rot. We flag those in writing before work starts, and the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Gardena Homes Specifically Do to This Job
The housing stock here is overwhelmingly post-WWII 1950s and 60s single-story stucco tract homes on small lots, many still on original slab foundations with minimal wall insulation. That build era matters for impact windows: the rough openings are often slightly out of square, and the original stucco around the frames has had sixty-plus years to crack and settle. We plan on carpentry adjustment at nearly every job. In the 90248 corridor, the low-slung 1960s to 80s tilt-up and masonry commercial buildings often get impact glazing as part of tenant improvement work, where the framing is different and the plan check is stricter. The City of Gardena’s building department runs a thorough plan-check process, and the long-standing Japanese-American community here has kept a lot of these homes in the same families for decades, which means original windows are still in place and worth replacing properly rather than patching. If your project grows into site work, homeowners often pair this with Aluminum Fence in Gardena for perimeter security or Iron Fence in Gardena for a heavier gate. As part of a full Windows & Doors in Gardena scope, impact units are the security-focused piece.
Serving Gardena, CA – Our Local Coverage Area
We serve Gardena and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Impact Windows & Doors in Gardena

Installation itself runs two to four days for a typical single-story home, with custom doors adding one or two more. The full timeline from signed contract to inspection is usually six to nine weeks because of production lead time and permit review. Call (888) 345-8164 for a schedule estimate on your house.
Yes. The City of Gardena requires a permit for window and door replacement, and the inspector will check anchoring, flashing, and product labeling. We pull the permit, submit the manufacturer’s test documentation, and coordinate the inspection. Call (888) 345-8164 and we’ll walk you through what the plan check will want.
In most cases, yes. Like-for-like replacement stays within the existing rough opening, so no plumbing, electrical, or structural work is needed. If you’re enlarging an opening or adding a new door, that changes the scope and the permit. Call (888) 345-8164 for an on-site assessment.
Most jobs run $8,000 – $25,000, with the low end for partial replacement and the high end for a whole-house package with sliding doors. Frame material, glass package, and opening count are the main drivers. Call (888) 345-8164 for an exact quote, and estimates are free.
Every installation is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. Manufacturer warranties on the units themselves vary by brand and we hand over the documentation at closeout. Call (888) 345-8164 to talk through coverage before you commit.
Get a Free Impact Windows & Doors Estimate in Gardena
We’ll come to your home, measure every opening, and put a written line-item estimate in your hands. No change orders later, permit fees included, and the price you see is the price you pay. We cover all of Gardena, and our technicians bring up to 12 years of experience to each job. To see the wider scope, browse our Windows & Doors service. Call (888) 345-8164 for your free estimate.
Written by the team at Groundwork Construction Co.












