







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Gardena, CA: What the Job Actually Involves
Vanities, tile and fixtures work in Gardena usually runs $9,000 – $28,000 and takes two to four weeks from demo to final walkthrough, depending on how much tile you’re replacing and whether plumbing or electrical has to move. The scope is the surface and fixture layer of a bathroom: new vanity and top, floor and wall tile, shower or tub surround tile, toilet, faucets, lighting, and the trim that ties it together. Call (888) 345-8164 and we’ll price your specific room on site, free.
How We Sequence a Vanity, Tile & Fixture Job in Gardena

Tile and fixture work fails or succeeds on the order things happen, not on the tile you pick. Here’s the real sequence we run on a Gardena bathroom.
Stage 1: Demo and substrate inspection (days 1 – 2)
We pull the old vanity, toilet, and tile down to the studs and slab or subfloor. This is where 1950s Gardena tract homes surprise you: original mud-set tile beds, galvanized stub-outs, or a floor that’s out of level by an inch across six feet. We photograph everything before we cover it and tell you the same day if what’s underneath changes the scope.
Stage 2: Rough-in and framing corrections (days 2 – 4)
If the vanity is moving, the drain and supply lines get relocated and the wall opened for a new GFCI circuit and vanity light. You decide here: keep the vanity in its current spot, or move it and pay for the plumbing and electrical change. This is the single biggest fork in the estimate.
Stage 3: Waterproofing and backer board (days 4 – 6)
Cement backer board goes up in wet areas with a bonded waterproofing membrane over it. We don’t skip this step and we don’t tile directly to drywall in a shower. You’ll see the membrane before any tile goes on, and you’ll get photos of it in your project file.
Stage 4: Tile setting and grout (days 6 – 12)
Floor tile sets first, then walls and shower surround, then grout and sealant. Large-format tile takes longer to set than a 3×6 subway because the substrate has to be flatter and the cuts are less forgiving. Plan on two to three days of setting for a standard 5×8 bathroom, longer if you’re running tile to the ceiling.
Stage 5: Vanity, top, fixtures and trim (days 12 – 16)
The vanity cabinet gets set and shimmed level, the countertop and sink go in, then the toilet, faucets, shower valve trim, mirror, and lighting. Final walkthrough last. You sign off on a punch list before we call it done, and everything is backed by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the decisions that drive cost get made in a single afternoon. Here’s the honest trade-off on each.
- Vanity cabinet: Stock particleboard boxes are the cheap end and rarely survive a wet floor; plywood-box cabinets with a furniture finish hold up far better and add roughly $600 – $1,400 over stock. KraftMaid and similar lines sit in the middle for price and finish quality.
- Countertop: Cultured marble is the budget pick and stains around the sink over time. Quartz or a Cambria-type surface costs more but doesn’t stain or need sealing and is the right long-horizon choice in a house you plan to keep.
- Floor tile: Porcelain is the workhorse – dense, low absorption, holds up to a wet floor. Natural stone (travertine, marble, slate) looks warmer but needs sealing every year or two and is more prone to etching.
- Wall and shower tile: Ceramic subway is inexpensive and easy to install. Porcelain large-format reads more modern and cleans easier but demands a flatter substrate. Mosaic on a shower floor gives grip and drainage that a large tile can’t.
- Fixtures: Kohler, Moen, and Delta all sit in the same price neighborhood for a comparable faucet and valve. Higher-priced trim buys finish and feel, not better water. Spend the extra on a thermostatic shower valve before you spend it on a prettier faucet handle.
- Toilet and lighting: A comfort-height, one-piece toilet and a code-compliant exhaust fan are cheap upgrades with real daily payoff. LED vanity lighting rated for a damp location is the only right answer in a bathroom.
What Vanities, Tile & Fixtures Costs in Gardena, CA

Plan on $9,000 – $28,000 for vanities, tile and fixtures in Gardena. A straightforward refresh – new vanity and top, floor tile, new toilet and faucets, no plumbing moves – lands near the bottom of that range. A full tile job with a relocated vanity, new shower tile, and upgraded fixtures lands at the top.
Here’s what moves the number:
- Room size: A 5×8 hall bath and a 10×12 primary bath are different jobs. Every additional square foot of tile adds material and setting time.
- Existing condition: Original mud-set beds, rotted subfloor, or galvanized supply lines mean demo and repair you didn’t budget for. In Gardena’s older tract homes this is common, not rare.
- Plumbing and electrical relocation: Moving the vanity, adding a circuit, or relocating a shower valve adds real money. Keeping fixtures where they are is the cheapest version of this job.
- Material grade: Porcelain and ceramic sit at one end; marble, quartz, and large-format porcelain sit at the other. This is the lever you control most directly.
- Permit scope: Tile and cosmetic replacement generally doesn’t trigger a permit. Relocating plumbing or adding electrical circuits does, and Gardena’s plan-check process has its own lead time.
A written estimate from us is line-item: tile, setting materials, vanity, top, fixtures, labor, permit if required, and disposal. What typically isn’t included is hidden rot, mold remediation, or anything found after demo reveals a bigger problem – we bring you a change order with photos and a number before we touch it. No-hassle upfront pricing means the number on the estimate is the number you pay. Call (888) 345-8164 for a free on-site quote.
See the difference
Before
After
Before
After
Before
AfterWhat Gardena Homes Specifically Do to This Job
Gardena’s housing stock is mostly post-WWII single-story stucco tract homes on small lots, many still on original slab foundations with early copper or galvanized plumbing. That matters for vanity and tile work because the supply stub-outs behind an original vanity are often at the end of their life, and the floor under an original mud-set tile bed is rarely flat. We plan for both and tell you what we find before we cover it.
The city’s building department runs a strict plan-check, so any job that touches plumbing relocations or new electrical circuits goes through as a real permit with real inspection. We pull it and pass it. The marine layer in this South Bay pocket also affects exterior-adjacent work – not a bathroom tile job, but worth knowing if your project runs into stucco repair on the outside wall. Homes in the 90247 and 90249 ZIPs that we work on most often show the same pattern: a 1950s bath with a vanity that’s been replaced twice but the tile underneath never touched, and plumbing that needs updating before the new vanity goes in. If the project grows into a full room rebuild, that’s Bathroom Remodeling in Gardena, handled by the same crew.
We work throughout Gardena, including the neighborhoods near Alondra Park and along the Artesia corridor. Our Bathroom Remodeling service covers the full scope when the job grows beyond tile and fixtures. Homeowners sometimes pair the bathroom work with Tile Roofing in Gardena or Specialty Roofing in Gardena on the same visit, since the crews are already on site.
Serving Gardena, CA – Our Local Coverage Area
We serve Gardena and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in Gardena

A standard 5×8 bathroom takes two to four weeks from demo to walkthrough, with tile setting and curing accounting for about half of that. If plumbing or electrical has to move, add three to five days. Call (888) 345-8164 and we’ll give you a real calendar date, not a vague window.
Cosmetic tile replacement and swapping a vanity in the same location generally don’t require a permit. Relocating plumbing, adding an electrical circuit, or changing a shower valve does, and Gardena’s plan-check is thorough. We pull the permit and pass the inspection. Call (888) 345-8164 to confirm what your specific job needs.
Yes, and it’s the most cost-effective version of the job. Keeping the vanity, toilet, and shower valve in their current locations means no plumbing rough-in, no new circuit if the existing one is adequate, and a shorter schedule. The trade-off is that you’re designing around the existing layout. Call (888) 345-8164 and we’ll tell you what’s possible without moving pipes.
The full range runs $9,000 – $28,000, with a cosmetic refresh near the bottom and a full tile rebuild with relocated vanity at the top. Material grade is the biggest lever you control. Call (888) 345-8164 for an exact quote – estimates are free and line-item.
Every vanities, tile and fixtures job we do is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right, for two years after completion. That’s one of the longest workmanship guarantees in residential construction. Call (888) 345-8164 to schedule your free estimate.
Get a Free Vanities, Tile & Fixtures Estimate in Gardena
Call (888) 345-8164 to schedule a free on-site estimate for vanities, tile and fixtures in Gardena. A live person answers, day or night, and we’ll walk your bathroom, measure the tile area, price the vanity and fixtures you’re considering, and hand you a written line-item quote with a real start date. No-hassle upfront pricing, background-checked technicians in uniform, and 0% financing for 18 months if you need it. $1,000 off applies to projects over $10,000.
Written by the team at Groundwork Construction Co.












