







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Gardena: What the Job Actually Involves and What It Costs
Cabinets & countertops work in Gardena usually means replacing the boxes and the slab together, and the realistic budget is $14,000 – $45,000 depending on layout, materials, and how much of the old plumbing and wiring has to move. Most single-family kitchens here are finished in three to five weeks once materials land. Call (888) 345-8164 and a live person answers around the clock to set up a free on-site estimate.
How we run a cabinet and countertop job in Gardena, stage by stage

This isn’t a coat of paint on the same boxes. Cabinets & countertops are the two systems that dictate how the whole room functions, so each stage has to close out cleanly before the next one opens.
Stage 1: measure and layout, days 1 – 3. We template the room down to the sixteenth of an inch, confirm appliance cutouts, and decide with you where the sink lands, where the range goes, and whether the refrigerator box needs to grow. You choose the door style and finish here, because cabinet lead times drive the entire schedule.
Stage 2: demo and prep, one to two days. Old cabinets come out, the wall surface gets trued up, and we check what’s behind them. In Gardena’s older tract homes this is where we find the surprises: galvanized supply lines, undersized circuits, or a wall that was never properly squared. You approve any change order in writing before we touch it.
Stage 3: cabinet install, two to three days. Base boxes first, then uppers, then fillers and crown. We shim and level every run, because a countertop only sits flat if the cabinetry under it does. Drawer and door adjustment happens at the end of this stage, not after the counters go down.
Stage 4: countertop template and fabrication, five to ten working days. Once the base cabinets are set, the slab gets templated, cut, and finished off-site. You pick the edge profile and confirm the sink and faucet cutouts during this window. Fabrication time is the single biggest wildcard in the whole job.
Stage 5: install, plumbing, and punch, two to three days. Countertops set, sinks and faucets tied in, and backflow checked at every joint. We walk the room with you, list every punch item, and close them all before we call the job done. That’s how the 730-Day Done Right Promise works in practice: if it’s not right, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll pick between
Every choice below is a real fork in the road. Here’s the honest trade-off on each, so you can weigh cost against how you actually live in the kitchen.
- Stock vs. semi-custom cabinets. Stock boxes cost less and land faster, but they come in fixed sizes, which means filler strips and awkward gaps in a non-standard layout. Semi-custom runs a few thousand more and lets the boxes match the wall. We work with KraftMaid across the semi-custom range because the door and finish options hold up.
- Plywood vs. particleboard boxes. Plywood resists moisture and re-screws cleanly if hardware ever loosens. Particleboard is cheaper and fine in a dry, well-vented kitchen, but it doesn’t love a leak under the sink.
- Undermount vs. drop-in sinks. Undermount gives a cleaner countertop line and makes wiping the deck down easy. Drop-in costs less to install and doesn’t require the countertop fabricator to polish a cut edge.
- Quartz vs. quartzite vs. granite. Quartz is non-porous and doesn’t need sealing, which suits a busy household. Natural quartzite and granite bring more movement and heat tolerance but want periodic sealing. Cambria is our go-to on engineered quartz.
- Door profile and finish. Painted shaker is the safe, resale-friendly pick. Slab fronts are cleaner to look at but show every fingerprint. Thermofoil is the budget option and doesn’t love a hot kitchen.
- Hardware and lighting. Soft-close hinges and undermount drawer slides are worth the upgrade. Under-cabinet lighting is best decided before cabinets go up, not after the wall is closed.
What Cabinets & Countertops costs in Gardena, CA

Expect $14,000 – $45,000 for cabinets and countertops together on a typical Gardena kitchen. The line items break out roughly like this:
| Line item | Gardena range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Full kitchen remodel (both scopes together) | $14,000 – $45,000 |
What pushes a job to the high end? Four things. Size and layout top the list: a galley with two runs of uppers is a different number than an L-shape with an island. Existing condition matters more than most homeowners expect, because a post-WWII Gardena home often has galvanized pipe or a wall that was never squared. Relocating plumbing or electrical to move a sink or add a circuit is a hard cost that doesn’t go away. Material grade adds up fast on the slab and the door finish, and permit scope adds fees plus the time to process them.
A written estimate from us covers demo, cabinetry, countertop fabrication and install, sink and faucet tie-in, and cleanup. It does not cover unexpected structural or wiring repairs found behind the wall or appliances you’re buying separately. Those get quoted as line items and approved by you before anyone swings a hammer. Upfront pricing, no surprises. We also run $1,000 off projects over $10,000 and 0% financing for 18 months so the number lands where you can plan around it.
See the difference
Before
After
Before
After
Before
AfterWhat Gardena homes specifically do to this job
Gardena is mostly post-WWII 1950s and 60s single-story stucco tract homes on small lots, and that shapes this work more than anything. Kitchens were built tight, which means a modern-depth refrigerator or a wider range often forces a layout tweak, not just a cabinet swap. Original slab foundations, galvanized or early copper plumbing, and minimal wall insulation are common, so we plan for a possible utility upgrade inside the budget instead of pretending it won’t show up.
Permitting runs through the city’s own building department, and the plan-check here is thorough; work that involves moving gas or electrical inside the cabinetry typically needs a permit and an inspection. We pull permits and pass inspections as standard. Gardena’s dry Santa Ana wind days can also push hot-work and exterior construction onto red-flag restrictions, which matters when a job spans the exterior stucco patching that often follows a cabinet change. In the 90247 and 90249 ZIPs, the marine layer keeps fresh exterior stucco from curing if it’s applied late in the day, so we schedule that work for the morning. We cover the whole of Gardena and the surrounding streets, and homeowners here often pair a kitchen update with Walk-In Showers & Shower Remodeling in Gardena or a Tub-to-Shower Conversion in Gardena when one budget is already open.
This cabinet and countertop work is often the front half of a bigger job, and when it’s part of a full Kitchen Remodeling in Gardena we coordinate the trades on one schedule. If you want the wider picture, our kitchen remodeling service lays out the full scope. Cabinets & countertops are where we start, and where the kitchen takes its shape.
Serving Gardena, CA – Our Local Coverage Area
We serve Gardena and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Cabinets & Countertops in Gardena

Most Gardena jobs run three to five weeks from demo to final walkthrough, and the countertop fabrication window is the biggest variable. Cabinet lead time is the other scheduling driver, so we lock the door style and finish in the first week. Call (888) 345-8164 for a timeline with your exact selections.
If the job stays cosmetic, no. If you’re moving plumbing, gas, or electrical inside the cabinetry, a permit and inspection are typically required by the city. We pull the permits and handle the inspection as part of the project, so you’re not chasing the building department. Call (888) 345-8164 to talk through your scope.
Yes, and it’s the most common way we do it. Keeping the sink and range in place means no plumbing rough-in, no gas re-route, and a shorter schedule with a smaller budget. A layout change looks better on paper than it usually feels once the wall is open. Call (888) 345-8164 for an honest read on whether a move is worth it.
Plan on $14,000 – $45,000 for cabinets and countertops together, with cabinet installation running $4,000 – $13,000 and countertop installation $2,000 – $6,500 as separate lines. Layout size, existing condition, and material grade move the number the most. Call (888) 345-8164 for a written, line-item estimate; estimates are free.
Every cabinets & countertops job we finish is covered by the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If something isn’t right, we come back and make it right, in writing. Our technicians bring up to 12 years of experience to each project, background-checked and arriving in uniform. Call (888) 345-8164 to hear how the warranty reads before you sign anything.
Get a free cabinets & countertops estimate in Gardena
Once you know the range, the next step is a real number for your kitchen. We come out, measure, look at what’s behind the current boxes, and hand you a written line-item estimate that covers demo through final walkthrough. The call is answered by a live person around the clock, and there’s no pressure and no voicemail. Call (888) 345-8164 to schedule your free on-site estimate for cabinets & countertops in Gardena.
Written by the team at Groundwork Construction Co.












