







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Window Installation in Lomita, CA: What the Job Actually Involves
Window installation in Lomita typically runs $4,500 to $15,000 for a whole-house replacement package, with most single-window openings landing $600 to $1,400 installed depending on size, frame material, and whether the rough opening has to be reframed. A standard 8 to 12 window job takes two to four working days on site, plus a permit review through the City of Lomita that usually adds a couple of weeks before we start. Call (888) 345-8164 and we’ll walk you through what your house likely needs.
How Window Installation Works, Stage by Stage

Window installation isn’t a mystery. It’s a sequence, and each stage has a decision that belongs to you. Here’s how we run it in Lomita.
Stage 1: Site measure and product selection (day 1, about 90 minutes)
We measure every opening inside and out, check the sill heights, note any rot in the framing, and confirm which windows are being replaced versus which are staying. This is where you pick frame material, glass package, grid pattern, and interior finish. We measure twice because a half-inch error on a stucco wall means a rebuilt opening. You leave with a written line-item quote, not a verbal ballpark.
Stage 2: Permit submission and plan check (roughly 2 to 3 weeks)
Lomita runs its own plan-check process, and window changes are reviewed for egress, safety glazing, and energy compliance under California code. We pull the permit in our name, submit the product specs, and track the review. You don’t chase it. If the city asks for a correction, we handle it before a crew ever shows up.
Stage 3: Protection, demo, and prep (day 1 on site, about 4 hours)
Furniture gets moved and covered, floors get drop cloths, and we cut back the stucco or siding to expose the rough opening. Old windows come out, and we inspect the framing, flashing, and sheathing. On 1920s – 1950s Lomita homes this is where we find the surprises: dry rot at the sill, missing building paper, or a header that was never sized for the original span. You get a call before we add anything to the scope.
Stage 4: Setting, flashing, and sealing (days 2 and 3)
New units get set level and plumb, shimmed, fastened, and flashed in the correct sequence so water sheds outward. Salt air and marine fog in Lomita punish bad flashing, so we use corrosion-rated fasteners and seal the full perimeter before the exterior cladding goes back. Stucco patching and paint touch-up happen after the window is in and sealed, not before.
Stage 5: Inspection and walkthrough (day 3 or 4)
The city inspects the installed windows and we schedule it. Then we walk the job with you, demonstrate operation and locks, and hand over the warranty documentation. Anything that isn’t right gets fixed before we call it done, and if something shows up later, the 730-Day Done Right Promise covers it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Window installation is mostly a spec decision. Here’s what actually matters at the table.
- Vinyl frames – The most common choice on a budget. Good thermal performance, no painting, and they hold up well in mild coastal air. Trade-off: they can’t be repaired easily and look plasticky on an older bungalow’s front elevation.
- Fiberglass frames – More dimensionally stable than vinyl and take paint, which suits a 1930s – 50s Lomita house better. Costs roughly 15 to 25 percent more than vinyl.
- Wood-clad frames – Wood interior, aluminum or vinyl exterior. Beautiful on the trim details of older homes, but you’ll pay for it and the exterior finish needs attention over time.
- Andersen and Marvin – Both sit in our brand portfolio for a reason: consistent tolerances, real parts support, and profiles that match period homes. Worth the premium on a front elevation; harder to justify on a back bedroom.
- Glass packages – Double-pane with low-E and argon is the baseline here. Tempered glass is required in doors, near floors, and beside tubs.
- Retrofit versus full-frame replacement – Retrofit inserts into the existing frame and is cheaper and faster but hides whatever the old jambs are hiding. Full-frame means new jambs and flashing, and it’s the right call when the wood is soft.
What Window Installation Costs in Lomita, CA

Plan on $4,500 to $15,000 for a typical Lomita window installation, with impact-rated packages running $8,000 to $25,000. Here’s what moves a job from the low end to the high end:
- Count and size of openings – A picture window and a small casement are not the same labor. Bigger openings need more framing, more glass, and sometimes a header.
- Condition of the existing framing – Dry rot, missing flashing, or undersized headers all add work. On older Lomita bungalows, sill rot is the most common add.
- Retrofit versus full-frame – Full-frame replacement carries more labor and more stucco repair.
- Material grade – Vinyl, fiberglass, and wood-clad sit in three different price bands.
- Permit scope – A straightforward replacement permit costs less than one that includes structural reframing.
A written estimate from us lists each window by size, model, and installed price, plus permit fees, stucco patching, and disposal as separate line items. What’s usually not included: interior paint, blinds or shades, and any structural work discovered behind a wall. We tell you before we start, not after.
See the difference
Before
After
Before
After
Before
AfterWhat Lomita Homes Specifically Do to This Job
Lomita is roughly one square mile, incorporated in 1964 and surrounded by Torrance, with almost no undeveloped land. That means the housing stock is old, tight, and built on 5,000 to 6,000 square foot lots, mostly 1920s – 1950s bungalows and early tract homes in ZIP 90717, with 1960s – 70s stucco apartments along the major corridors. When we cut open a wall in Lomita, we expect to find old framing, a fair amount of sill rot from the marine layer, and fasteners that have been quietly corroding for decades in the salt air. The coastal-inland South Bay climate means near-zero frost, so freeze protection isn’t the issue. Rot, flashing, and envelope details are. The City of Lomita’s own plan-check process is also stricter on setbacks and second-story sight lines than sprawling Torrance next door, so on the small lots near the Pacific Coast Highway and Lomita Boulevard corridors, window placement and glazing choice often get designed around a neighboring roofline before plans go in. If your project grows into doors or exterior trim, that’s part of a full Windows & Doors in Lomita scope we handle together.
Serving Lomita, CA – Our Local Coverage Area
We serve Lomita and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Window Installation in Lomita

A typical 8 to 12 window job takes two to four working days on site after the permit clears, and the permit review itself usually runs two to three weeks. Call (888) 345-8164 for a schedule built around your house.
Yes. The City of Lomita requires a permit for replacement windows, and the inspection confirms egress, glazing, and installation to California code. We pull the permit in our name and pass the inspection before final payment – estimates are free, so call (888) 345-8164 to start.
Usually yes, because a standard replacement leaves plumbing and structure alone and only touches the rough opening and cladding. If rot or an undersized header turns up once the wall is open, we stop and quote the structural piece before continuing. Call (888) 345-8164 for a site visit.
Most whole-house packages land between $4,500 and $15,000, with impact-rated packages running $8,000 to $25,000. The exact number depends on window count, material, and what we find behind the old frames. Call (888) 345-8164 for an exact quote – estimates are free.
Every installation is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction, and the window manufacturer’s product warranty stacks on top. If something isn’t right, we make it right – call (888) 345-8164 to schedule your free estimate.
Ready for a Free Estimate?
If you’re pricing Window Installation in Lomita, call (888) 345-8164 and we’ll set up a free on-site estimate. We measure every opening, flag any rot or framing issues on the spot, and hand you a written line-item quote with permits, patching, and disposal all spelled out. A live person answers the phone, any hour. If you’re planning a bigger exterior project, homeowners often pair this with Wood Fence in Lomita or a Chain Link Fence in Lomita, and our Windows & Doors service covers the rest. You can also see our full Lomita service area.
Written by the team at Groundwork Construction Co.












