







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Long Beach: What the Job Actually Involves
Paver driveways in Long Beach typically run $7,000 – $18,000 for a standard two-car apron of roughly 400 – 600 square feet, and most jobs take 3 – 5 working days from demolition to the final sealer coat. The work itself is excavation, a compacted aggregate base, edge restraint, bedding sand, the pavers, and polymeric joint sand. Call Groundwork Construction Co. at (888) 345-8164 and we’ll walk your driveway and give you a real number, free.
How We Build a Paver Driveway: Day by Day

Paver driveways have a fixed sequence, and the parts that go wrong on other people’s jobs are almost always in stages 2 and 3, not the pavers themselves. Here’s what happens on yours.
Stage 1: Site walk and layout (half a day)
We shoot grades, check where water currently runs off the apron, and mark the excavation line. This is where you decide the paver pattern, the border detail, and whether we’re tying into an existing walk or starting fresh. If the driveway is part of a full Driveway & Pavers in Long Beach project with a new front walk, we lay out both at once so the joints line up.
Stage 2: Demolition and haul-off (1 day)
Old concrete, asphalt, or cracked pavers come out, along with whatever root or subgrade has heaved over the decades. On Rose Park and Belmont Heights bungalows we frequently find an old redwood or citrus root running under the apron, and it comes out now, not later. We cut and haul the same day so nothing sits on your street overnight.
Stage 3: Base prep and compaction (1 – 2 days)
This is the stage that decides whether your pavers stay flat in year eight. We excavate to 8 – 10 inches, lay and compact class II base in 2-inch lifts, and verify grade with a laser so water sheds away from the garage. A paver driveway over a lazy base will ripple within two rainy seasons, no matter how good the pavers are.
Stage 4: Edge restraint, sand, and pavers (1 – 2 days)
Concrete or spike edge restraint goes in first so the field can’t creep. Then bedding sand, the paver field, and the cuts at the garage threshold and street apron. You’ll see your pattern come together on day 3 or 4. We use Cambridge Pavers and Techo-Bloc products most often here, both of which hold color well through the coastal UV load.
Stage 5: Compaction, polymeric sand, and sealer (half a day)
Plate compaction, joint sand swept and watered in, then a sealer coat after a cure window. We walk the finished surface with you before we leave.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Most of the decision happens before we break ground. Here’s the honest version of each one.
- Concrete pavers (interlocking): the workhorse. $7,000 – $14,000 installed for a standard Long Beach apron. Holds up to salt air and vehicle load, individual units can be lifted and reset if something shifts, and there’s no cracking across a slab.
- Techo-Bloc or Cambridge Pavers tumbled/colonial styles: the same base system with a softer, older-looking face. $10,000 – $18,000. Suits the Spanish Colonial and Craftsman streetscapes in Belmont Heights and Bluff Park better than a crisp modern profile, but the surface texture traps more grit from the street.
- Permeable pavers with open joints: worth considering if your apron drains to the street and you’ve had ponding. Costs roughly 10 – 15% more than standard pavers. Overkill for most flat lots, real value on sloped ones.
- Border and soldier-course details: a contrasting border adds $400 – $1,200 depending on length. Visually separates the apron from the street, and it’s the single detail that makes a paver driveway read as designed rather than installed.
- Sealer: enhances color and slows staining. Skip it if you like a matte, natural look; budget $250 – $700 if you want the enhanced version and a maintenance coat every few years.
What Paver Driveways Cost in Long Beach, CA

Expect $7,000 – $18,000 for a residential paver driveway in Long Beach. That’s the honest range, and here’s what moves a job to one end or the other.
| Line item | Typical range |
|---|---|
| Paver driveway installation (400 – 600 sq ft) | $7,000 – $18,000 |
| Driveway replacement (demo + rebuild) | $5,000 – $14,000 |
| Driveway sealing (after install or later) | $250 – $700 |
| Paver patio if bundled on the same visit | $3,500 – $11,000 |
What moves the number: square footage is the biggest lever, since base, sand, and labor all scale with it. Subgrade condition comes second: soft fill or a heaved slab means more excavation and more base material. Paver grade and pattern complexity (running bond vs herringbone, borders, curved cuts) pushes it up. Access matters on Long Beach lots, where a narrow side yard or a shared alley approach means hand-hauling material instead of a skid steer. And if the job includes a permit (more below), that adds time and cost.
What’s in a written estimate: demo, haul-off, base material, compaction, edge restraint, pavers, cuts, polymeric sand, and cleanup, all line-itemed. What’s not in it: drainage repair you didn’t know about, root removal, or a different paver selection after the fact. We flag those on the walk, not on the invoice. Our pricing is upfront and the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Long Beach Homes Specifically Do to This Job
Long Beach driveways sit inside a permitting stack you don’t hit in Lakewood or Compton. Much of the older housing stock in Rose Park and Belmont Heights falls inside a Coastal Zone and a designated historic context, and a paver driveway that changes the footprint, the apron, or the curb cut can trigger Coastal Commission review or design review alongside the standard city permit. A pure like-for-like paver replacement usually doesn’t need a permit; a driveway that widens, adds a new curb cut onto a residential street, or alters grading near a protected property line often does, and we pull it and pass the inspection before we touch the pavers.
The marine layer and salt air off the Port of Long Beach also matter here in a way they don’t inland. Salt-laden air accelerates corrosion on metal edge restraint and fasteners, which is why we spec galvanized or coated hardware rather than bare steel, and the near-zero annual rainfall means drainage concentration happens in a few big storms instead of getting spread out. On the older fourplexes along the east side we also regularly find un-permitted additions and old utility runs crossing the apron, and if the project grows into a structure, homeowners often pair this with Garage Conversion ADU in Long Beach work so the driveway and the new unit are planned together.
Serving Long Beach, CA – Our Local Coverage Area
We serve Long Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Long Beach

Most paver driveways in Long Beach take 3 – 5 working days, with a day of demo, one to two days of base prep, one to two days of pavers, and a half-day closeout. Coastal Zone or historic review adds permit time before the first day on site. Call (888) 345-8164 for a schedule based on your specific property.
A straight replacement of existing driveway square footage typically does not; widening, a new curb cut, or a change in grading near a Coastal Zone or historic property often does. We confirm what applies to your address before work starts and pull and pass the inspection where it’s required. Call (888) 345-8164 and we’ll tell you where yours stands.
Yes, in most jobs. On older Long Beach lots we occasionally find utility runs crossing under the apron, and in that case we plan the excavation around them rather than relocating. Anything structural is a separate conversation, and if the driveway is part of a larger scope (walk, patio, or a structural addition under ADU Design & Permitting in Long Beach), we sequence it so nothing gets re-dug.
Paver driveways in Long Beach cost $7,000 – $18,000 for a standard residential apron, with permeable pavers and complex border patterns at the top of that band. Bundled patio work adds $3,500 – $11,000. Call (888) 345-8164 for an exact quote; estimates are free and line-itemed.
Every paver driveway we build carries our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s the workmanship; the paver manufacturers also carry their own material warranties, and we hand those to you in writing at closeout. Call (888) 345-8164 and we’ll walk through both before you sign anything.
Get a Free Paver Driveway Estimate in Long Beach
We’ll come to your property, measure the apron, check subgrade and drainage, and hand you a written line-item estimate for paver driveways in Long Beach, free. One call starts it: (888) 345-8164. A live person answers, day or night, and scheduling takes about five minutes. If you want the wider project, our Driveway & Pavers service and the rest of what we do across Long Beach are all under the same 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.












