







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
What does an aluminum fence in Long Beach, CA cost and how long does it take?
An aluminum fence in Long Beach runs $4,000 – $10,000 installed, with most single-family front yards landing in the $3,500 – $9,000 range once the property line is clean and the grade is simple. Plan on two to four days of on-site work for a standard 100 – 150 linear foot run: day one for layout and post setting, day two for panels and gates, day three for hardware, alignment and cleanup. Call (888) 345-8164 and we’ll give you a written, line-item number before anyone touches your yard.
How we build an aluminum fence: the actual sequence

Aluminum fence looks simple in a catalog photo. The work that makes it look that way in year ten is all in the front end. Here’s what our crews actually do, stage by stage, and where you need to make a call.
Stage 1 – Site walk and stake-out (about an hour)
We walk the property line with you, confirm where the fence runs, and verify the setback from any easement or utility corridor. This is where you decide gate locations and swing direction. If the line is shared with a neighbor, this is also the moment to confirm the boundary, because a survey beats an assumption every time.
Stage 2 – Utility locating and demolition (half a day)
Before a single post goes in, we call for utility locating. We remove the old fence, haul it off, and clear roots or debris the panels will sit over. If there’s an existing concrete footing or a stubborn stump, that comes out here. This is the stage that surprises people on older lots – which is why we price the demo before the fence, not after.
Stage 3 – Layout and post setting (day one, most of it)
Posts get set in concrete at consistent depth and spacing, and on sloped runs we step the panels rather than racking them, so the fence follows the grade without gaps at the bottom. Our technicians have up to 12 years of experience and they’ll show you a string line before anything cures. Posts need to cure before the panels go on, so this stage runs a full day.
Stage 4 – Panels, gates and hardware (day two)
Panels set into post channels, rails trimmed, gate frames hung and adjusted for smooth latch and self-close. You’ll test the gate yourself before we finish, and if the latch catches or the swing drags, we adjust it on the spot. This is also when you decide on decorative post caps, finials or a color-matched hardware finish.
Stage 5 – Final walkthrough and cleanup (the short stage)
We walk the line together, confirm height, post spacing and gate function, and clean up the site – no leftover concrete splatter on your walkway. Everything we install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. If your project is part of a fuller yard rebuild, our Fence Installation in Long Beach page covers the wider scope.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The aluminum fence options you’ll choose between
Aluminum is aluminum to some buyers, but the choices below are the ones that actually change how the fence looks and how long it lasts. We’ll bring samples so you can see the difference in your own light.
- Residential vs. heavy residential grade. Standard 3/4-inch residential panels suit a typical front-yard boundary. Heavy residential and commercial-grade panels use thicker rails and posts, handle more span between supports, and cost roughly $10 – $18 more per linear foot. Worth it on a long, exposed run facing the street.
- Powder-coat finish. Factory powder coating in black, bronze, white or a custom color resists the salt air far better than a field-painted finish. Deep bronze and matte black dominate in Long Beach; white suits a Spanish Colonial Revival facade. A custom color adds roughly 5 – 10%.
- Panel style and picket spacing. Flat-top, spear-top, or loop-and-picket designs. Tighter picket spacing offers more privacy and keeps small pets in; wider spacing reads more open. You choose this at stage one, because it drives panel fabrication.
- Post and foundation. Posts set in concrete footings with the option of decorative post caps. On a lot with a hardscape border, the footing detail matters – homeowners often pair this with Patios, Walkways & Pool Decks in Long Beach so the posts and the hardscape line up.
- Gates and automation. Manual gate, self-closing pedestrian gate, or a driveway gate with a low-voltage opener. Each adds cost and complexity, and each is a stage-four decision, not a stage-one one.
What Aluminum Fence costs in Long Beach, CA

Most Long Beach aluminum fence projects land between $4,000 and $10,000 installed, with our typical lead range at $3,500 – $9,000. The four variables that push a job to the low or high end:
- Linear footage and gate count. A 100-foot run with one pedestrian gate is the low end. A 200-foot perimeter with a driveway gate and two walk gates is the high end.
- Existing fence and site conditions. Removing a chain link, wood, or concrete-footed fence and hauling it off adds cost. A rocky or grading-challenged line adds more.
- Grade changes. A flat lot is straightforward. A steep or stepped run needs more posts and more labor to keep panels level.
- Material grade and finish. Heavy-grade panels, custom powder-coat colors, decorative caps and finials add to the base.
A written estimate includes demolition, haul-away, post footings, panels, posts, gate hardware and cleanup. It typically excludes a property-line survey if one is required, and any structural repair to a retaining wall or footing the fence sits against. Upfront pricing, no surprises – the number we write is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Long Beach homes do to this job
Long Beach construction is a collision of very old stock with very new regulation, and fence work is right in the middle of it. Pre-1933 and 1930s-era bungalows and Craftsman fourplexes in Rose Park and Belmont Heights sit in a Coastal Zone and a designated historic context, so a fence project there can trigger Coastal Commission review and historic-district design review on the same small lot – a permitting stack you won’t hit in Carson or Compton. That matters for aluminum specifically: style, height and finish may need to match the block’s character, not just your preference.
The salt air off the Port of Long Beach accelerates corrosion on exterior metal and fasteners, which is exactly why powder-coated aluminum beats wood or field-painted metal on the west side. And on the east-side fourplexes and older bungalows, we regularly run into original knob-and-tube-era conditions and un-permitted additions that shift where a fence can legally run. If your front walk or driveway apron is part of the same yard project, homeowners often pair this with Driveway Repair & Replacement in Long Beach so the fence footings and the pavement edge land in one pass. We cover the whole of Long Beach and the neighboring areas.
Serving Long Beach, CA – Our Local Coverage Area
We serve Long Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Aluminum Fence in Long Beach

Two to four days on site for a standard 100 – 150 foot run with one or two gates. Post cure time is the main driver of the schedule, and if permitting is involved in the Coastal Zone, add review time before the job can start. Call (888) 345-8164 for a schedule that reflects your actual lot.
Often yes, depending on height, location, and whether the property sits in the Coastal Zone or a historic context. We check the permit requirement for your address and pull what’s needed – permits pulled and inspections passed are part of how we work.
Minimal impact when posts are located and footings dug carefully around existing lines. We call for utility locating before digging, and we walk the run with you so you can flag irrigation lines and plant beds in advance.
No. Our written estimate is fixed for the scope we quote. If a rock, an unpermitted addition or a hidden condition changes the scope, we tell you before anyone continues – you approve it or we stop. Call (888) 345-8164 for an exact quote; estimates are free.
Every aluminum fence we install is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers workmanship; the manufacturer’s finish warranty runs alongside it. Our technicians are background-checked, arrive in uniform, and calls are answered by a live person 24/7.
Get your free aluminum fence estimate in Long Beach
Call (888) 345-8164 for a free on-site estimate. We’ll measure the run, check the property line and permit picture, show you grade and finish samples, and leave you with a written line-item quote – no pressure, no surprises. If you’re also considering a larger outdoor rebuild, ask about our Fence Installation service and current offers, including $1,000 off projects over $10,000 and 0% financing for 18 months.
Written by the team at Groundwork Construction Co..












