







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Specialty Roofing in Long Beach, CA: What It Covers and What It Costs
Specialty roofing in Long Beach covers the work that falls outside a standard asphalt shingle tear-off: tile repair and replacement, metal panel systems, low-slope and flat roof assemblies, and the odd shapes and historic profiles found on older homes. Most specialty jobs here run 2 to 5 days depending on roof size and material, and pricing usually lands between $600 and $2,500 for targeted repairs like tile work, or $15,000 to $40,000 for a full standing seam metal installation. A flat or low-slope section sits in the middle of that spread, and a written line-item quote is the only way to know where your roof lands. Call (888) 345-8164 and we’ll walk your roof and price it in writing.
The marine layer and salt air coming off the Port of Long Beach are the reason so many of these roofs fail early. Fasteners, flashing, and the metal components around penetrations corrode years ahead of inland schedules, which is why a roof that looks fine from the street can be failing at every seam.
How We Run a Specialty Roofing Job, Start to Finish
Specialty work has more decision points than a standard re-roof, so the sequence matters. Here’s what actually happens, stage by stage.
- Day 1: On-site evaluation and moisture survey. We get on the roof, check the deck and underlayment condition, and probe the trouble spots. On older Long Beach homes we’re looking for soft decking, failed flashing at chimneys and skylights, and corrosion at fasteners. You get a written scope with photos before anything moves.
- Days 1 – 2: Material selection and permit filing. You choose the material system (tile profile, metal panel finish, or flat membrane). We file the permit and, where the property is in a historic or coastal overlay, coordinate the design review. This stage can add a few days if review is required, and we tell you upfront when it will.
- Days 2 – 3: Tear-off and deck prep. We remove the existing material, inspect the deck, and replace any rotted sheathing. On Spanish Colonial Revival and Craftsman bungalows this is where we find the surprises: old nailers, patched decking, and sometimes remnants of a prior layer.
- Days 3 – 4: Installation. Underlayment, flashing, and the finished roof go down. Flashing is the part that decides whether the roof lasts. We don’t shortcut it.
- Day 5: Final inspection and walkthrough. We pass the inspection, clean the site, and walk you through what was done. Every job is backed by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
What you pick drives both the price and how the roof holds up in Long Beach’s salt air. Here’s the honest trade-off on each.
- Clay or concrete tile. The right look for Spanish Colonial Revival homes and the most common specialty roof in this market. Tile lasts decades but needs a sound deck and proper underlayment, and repairs require matching profiles.
- Standing seam metal. Long service life and the best corrosion resistance when you spec the right coating. Higher upfront cost, and the panel finish you choose (galvanized, Galvalume, or a painted system) is where the real durability difference lives.
- Low-slope and flat membrane systems. Common on the stucco fourplexes and garden apartments. TPO and modified bitumen are the usual picks, and they trade cost against lifespan and how much foot traffic the roof sees.
- Coastal-grade fasteners and flashing. Not glamorous, but the single biggest lever on lifespan near the water. Stainless or coated hardware costs more and buys years.
Our technicians have up to 12 years of experience matching the right system to the house, and we carry GAF and Owens Corning among our brand partners for the shingle and accessory components that sit alongside specialty work.
What Specialty Roofing Costs in Long Beach, CA

Targeted specialty repairs, like tile repair or replacing a failed section of metal flashing, typically run $600 to $2,500. A full metal roof installation runs $15,000 to $40,000, and a low-slope assembly lands in between depending on square footage and membrane choice. Here’s what moves the number.
- Roof size and pitch. A steep, cut-up roof takes more labor and more flashing detail than a simple gable.
- Existing condition. Soft decking, hidden rot, and multiple prior layers all add tear-off and prep cost.
- Material grade. Tile profile, metal coating, and membrane thickness each shift the total by thousands.
- Permit and review scope. Historic district or coastal review adds time and fees that a simple repair doesn’t carry.
- Access and height. Tight lots and multi-story buildings slow the work.
A written estimate from us lists materials, labor, permit fees, and what’s excluded. Upfront pricing, no surprises: the number you see is the number you pay, and we offer 0% financing for 18 months plus $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterWhat Long Beach Homes Specifically Do to This Job
Long Beach sits in a Coastal Zone with a deep historic context, and that changes the paperwork on specialty roofing. Pre-1933 and 1930s-era bungalows and Craftsman fourplexes in neighborhoods like Rose Park and Belmont Heights often trigger Coastal Commission review, historic-district design review, and seismic retrofit rules on the same small lot. That’s a permitting stack you don’t hit in inland Lakewood or Compton, and it’s why we file early and plan for review time.
The housing stock splits into 1920s – 40s Spanish Colonial Revival and Craftsman bungalows, dense 1950s – 70s stucco fourplexes and garden apartments, and post-war tract housing on the east side. On the east-side fourplexes and older bungalows we regularly find original knob-and-tube wiring and un-permitted additions from decades ago, and the soft-story and seismic retrofit requirements make structural upgrades a code-driven line of work that often unfolds alongside a roof project. If that wider work comes up, it’s part of a full Roofing in Long Beach scope, and we’ll tell you what needs to happen first. The marine layer and salt air accelerate corrosion on flashing and fasteners, while the dry Santa Ana wind events and near-zero rainfall keep drainage and foundation issues distinct from the rest of the region.
We work throughout Long Beach, and homeowners paired into the same projects often ask about our Roofing service or decide to add Energy-Efficient Windows in Long Beach while the roof is open, and Sliding & Patio Doors in Long Beach when a rear addition or opening changes the roofline.
Serving Long Beach, CA – Our Local Coverage Area
We serve Long Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Specialty Roofing in Long Beach

Most specialty jobs run 2 to 5 days of active work, with a few extra days for permit and historic or coastal review. Tile repairs can finish in a day; a full metal installation usually runs four to five. Call (888) 345-8164 for a timeline based on your roof.
Yes, we file the permit and handle the inspections. In Coastal Zone or historic-district properties around Long Beach, we also coordinate design review. That review can extend the schedule, and we tell you upfront rather than after the fact.
Usually yes. A re-roof or targeted repair doesn’t touch plumbing or framing unless the deck is soft or a prior addition is in the way. When we do find rot or an old un-permitted addition, we price the structural work separately so you see exactly what it costs.
Tile and flashing repairs typically run $600 to $2,500, and a full metal roof installation runs $15,000 to $40,000. Call (888) 345-8164 for an exact quote. Estimates are free and come in writing.
Every specialty roofing job is backed by our 730-Day Done Right Promise. If it’s not done right, we make it right. Calls are answered by a live person, 24/7, so you’re never stuck waiting on a return call.
Get a Free Specialty Roofing Estimate in Long Beach
If your roof is tile, metal, or low-slope, or you’re staring at corroded flashing near the coast, the right first step is a free on-site estimate. Call (888) 345-8164 and a live person answers, day or night. We’ll walk the roof, document what we find, and hand you a written line-item quote with no surprises. Background-checked, uniformed technicians on every job, backed by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.












